• Structural Engineering and Mechanics
• /
• 제52권6호
• /
• pp.1135-1156
• /
• 2014

The ratcheting effect greatly challenges the design of piping components. With the assistance of the quasi-three point bending apparatus, ratcheting and the ratcheting boundary of pressurized straight Z2CND18.12N stainless steel pipe under bending loading and vertical displacement control were studied experimentally. The characteristics of progressive inelastic deformation in axial and hoop directions of the Z2CND18.12N stainless steel pipes were investigated. The experiment results show that the ratcheting strain occurs mainly in the hoop direction while there is less ratcheting strain in the axial direction. The characteristics of the bending ratcheting behavior of the pressure pipes were derived and compared under load control and displacement control, respectively. The results show that the cyclic bending loading and the internal pressure affect the ratcheting behavior of the pressurized straight pipe significantly under load control. In the meantime, the ratcheting characteristics are also highly associated with the cyclic displacement and the internal pressure under displacement control. All these factors affect not only the saturation of the ratcheting strain but the ratcheting strain rate. A series of multi-step bending ratcheting experiments were conducted under both control modes. It was found that the hardening effect of Z2CND18.12N stainless steel pipe under previous cyclic loadings no matter with high or low displacement amplitudes is significant, and the prior loading histories greatly retard the ratcheting strain and its rate under subsequent loadings. Finally, the ratcheting boundaries of the pressurized straight Z2CND18.12N stainless steel pipe were determined and compared based on KTA/ASME, RCC-MR and the experimental results.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.221-228
• /
• 2003

The stress corrosion index of Kumamoto andesite are evaluated by two types of testing method. One is the uniaxial compression test under various water vapor pressures, and the other is the double torsion (DT) test under a constant water vapor pressure. For the uniaxial compression tests, the uniaxial compressive strength increases linearly with decreasing water vapor pressure on the double logarithmic coordinates. As the results, the stress corrosion index obtained is estimated 44. On the other hand, in the DT test, the relaxation (RLX) test and the constant displacement rate (CDR) test were conducted. For the CDR test, as the displacement rate of loading point increases, the crack velocity increases. However, the fracture toughness is constant regardless of the change in displacement rate and the average fracture toughness is evaluated $2.07MN/m^{3/2}$. For the RLX test, the crack velocity-stress intensity factor curves are smooth and linear. The stress corrosion index estimated from the curves is 37. Comparing stress corrosion indexes in the uniaxial compression test and the DT test, there is no significant difference in these values, and they are considered to be in coincident each other regardless of testing methods. Therefore, it is concluded that stress corrosion is one of material constants of rock.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제2권2호
• /
• pp.117-121
• /
• 1997

Glutamic acid can be crystallized inside cation exchange column when displacer NaOH concentration is high enough to concentrate displaced glutamic acid beyond its solubility limit. Resulting crystal layer of glutamic acid was moved with liquid phase through the column, and thus could be eluted from the column and recovered in fraction collector. For the purpose of enhancing crystal recovery, effects of operating parameters on the crystal formation were investigated. The increase in the degree of crosslinking of resin favored crystal recovery because of its low degree of swelling. Higher concentration of displacer NaOH was advantageous. If NaOH concentration is too high, however, crystal recovery was lowered due to the solubility-enhancing effects of high pH and ionic strength. The decrease of mobile phase flow rate enhanced crystal recovery because enough time to attain local equilibrium could be provided, but film diffusion would control the overall crystal formation with extremely low flow rate. Lower temperature reduced solubility of glutamic acid and thus favored crystal formation unless the rate of ion exchange was severely reduced. The ion exchange operated by displacement mode coupled with crystallization was advantageous in reducing the burden of further purification steps and in preventing purity-loss resulted from overlapping between adjacent bands.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.108-116
• /
• 2003

백악기 경상계 안산암과 불국사 화강암류가 주로 분포하는 지반에서 시공된 터널의 내공변위 계측자료를 분석하였다. 터널 주변 암반을 RMR법에 의한 다섯 가지 암반등급으로 구분하고 각 등급에 포함된 계측자료들을 통계처리하여 암반등급별 내공변위의 회귀분석을 실시하였다. 연구 결과. 로그함수보다는 지수함수의 상관계수 가 더 크며, 연약한 암반등급일수록 내공변위의 크기와 표준편차가 크게 나타났다. 또한, 최종내공변위에 대한 최대변위속도 및 초기내공변위의 관계를 도출하였으며, 이 중에서 최종내공변위와 최대변위속도의 상관계수는 0.87로 나타나 이들은 비교적 높은 상관성을 가지는 것으로 확인되었다

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.805-808
• /
• 2008

본 연구에서는 BS와 FA를 치환한 3성분계 고성능 콘크리트의 개발을 위해 기초적 특성을 분석하였는데, 그 결과를 요약하면 다음과 같다. 굳지않은 콘크리트 특성으로, 유동성은 혼화재 치환율이 증가할수록 OPC보다 증가하는 것으로 나타났고, 공기량은 전반적으로 혼화재 치환율이 증가할수록 감소하는 경향을 나타내었다. 경화 콘크리트 특성으로, 압축강도는 BS와 FA의 치환율이 증가할수록 초기재령에서는 OPC보다 저하하는 것으로 나타났으나, 재령 28일에서는 OPC과 유사하거나 그 이상으로 증가하는 것으로 나타났다. 특히 B30F15일때 재령 28일에서 OPC보다 약 15% 정도 높은 최대 압축강도 값을 발휘하였다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2975-2981
• /
• 2020

Radiation damage is one of the aging important causes in nuclear reactors. Radiation damage causes changes in material properties. In this study, this effect has been evaluated and analyzed on the clad of the Tehran research reactor (TRR). A grade 6061 aluminum is used as a clad in the TRR. The MCNPX code is used to designate the most sensitive location of the reactor and calculate neutron flux distribution. Then, a software using FORTRAN language programming is developed to process the particle track (PTRAC) output file of the MCNPX code. The SRIM code is used here to calculate the rate of displacement per atom. Moreover, the SPECOMP and SPECTER codes are also applied to estimate the displacement rate and compared with the results attained using the SRIM code. The rate of displacement per atom by the SPECTER and SRIM codes have been obtained 2.54 × 10^-7 dpa/s and 2.44 × 10^-7 dpa/s (QD method), respectively. Also, the mechanical properties have been evaluated using the RCC-MRx code and have been compared with experimental results. Finally, the change in the matter specification has been analyzed as a function of time.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.344-351
• /
• 2018

It is reported that the flooding rate in low permeability sandstones is low and the oil recovery is hard to increase after water breakthrough. Understanding characteristics of waterflood is hence important for the recovery improvement. In this work, flooding tests on low permeability sandstones were conducted. The corresponding flooding characteristics were investigated by means of CT scanning and Nuclear Magnetic Resonance. Effects of irreducible water and different rates were also discussed in detail. Experimental results reveal a piston-like displacement at a low rate in low permeability samples. The saturation profile is steep and almost vertical to the forward direction. The results at a low rate confirm that once water broke through, increasing the flooding rate or flooding time can hardly reduce the remaining oil inside the sample. It is probably due to the high pore-throat ratio proven by rate-controlled mercury. Results also confirm that the presence of initial water enhanced sweep efficiency substantially. On one hand, because water had previously occupied the small pores, the subsequent oil can only invade relatively large pores and became more movable. On the other hand, stable collars can not form due to the steep front, which may suppress the snap-off.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.665-677
• /
• 2014

A numerical method, using a special mixed finite element associated with the virtual crack extension technique, has been developed to evaluate the energy release rate for kinking cracks. The element is two dimensional 7-node mixed finite element with 5 displacement nodes and 2 stress nodes. The mixed finite element ensures the continuity of stress and displacement vectors on the coherent part and the free edge effect. This element has been formulated starting from a parent element in a natural plane with the aim to model different types of cracks with various orientations. Example problems with kinking cracks in a homogeneous material and bimaterial are presented to assess the computational accuracies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.855-859
• /
• 2004

We develop a new four-node flat shell element which is accurate, efficient, and suitable to be used on general purpose. The new element has a hybrid Trefftz element with drilling degrees of freedom as a membrane part. We define the two independent displacement field: the internal displacement field that satisfies governing equations in the domain a priori and the boundary displacement field that is usually used as a conventional finite element method. The hybrid Trefftz variational formulation connects these two displacement fields on the boundary of the domain. To add drilling degrees of freedom, we introduce the Allman's quadratic displacement field to the boundary displacement field. As a result, our flat shell element has 6 degrees of freedom per a node. We also use the well-known DKMQ plate bending element for the plate part of the proposed element. The DKMQ element satisfies Mindlin-Reissner‘s plate theory along the edge of the element and gives proper behavior regardless of the thickness. A series of numerical experiments shows that the performance of the new element such as accuracy, rate of convergence, robustness to mesh quality, and so on.

• 한국임상수의학회지
• /
• 제22권2호
• /
• pp.141-143
• /
• 2005

The preventive effects of calcium gluconate injection and administration of anion feed on occurrence rates of the abomasal displacement and retained placenta were examined from 86 pregnant cows reared in Paju and Goyang cities in Gyunggi Province. The cows were divided into 3 groups: control (30 heads), experimental group I (28 heads) and experimental group II (28 heads), respectively. The control cows were not treated at all. The cows in experimental group I were intravenously injected with calcium gluconate(CMPK, Am. Tech. Canada, 10 g/head). The cows in experimental group II were given with the anion feed (Goyang TMR, Korea, 9 kg/head/day). The occurrence rates of the abomasal displacement in experimental groups were lower than that of control group and experimental group revealed the lowest prevalence rate, however, significance was not detected. The occurrence rate of retained placenta in experimental groups revealed lower prevalence than that of control group and experiment group II showed the lowest prevalence rate(p<0.01). Considering the above findings collectively, it was thought that administration of anion feeds was affective for prevention of the bovine retained placenta during drying milk period.