• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.1036-1042
• /
• 2011

APR1400 RVI CVAP using the non-prototype category II is being conducted to verify integrity of the RVI design and to secure the CVAP technology. The measurement programs are to confirm vibration analysis results for reactor internals during pre-operational and initial startup testing and to determine the safety margin. One of the important basis for the measurement programs is test acceptance criteria. Therefore, this paper is on establishment of response instrumentation test acceptance criteria for APR1400 RVI CVAP. The established acceptance criteria show that the stress criteria of APR1400 RVI are more conservative values than those of the valid prototype plant(Palo Verde unit 1) and, the displacement criteria of the inner barrel assembly and the upper guide structure were established to 0.03 in and 0.01 in, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.212-218
• /
• 2011

APR1400 RVI CVAP using the non-prototype category is being conducted to verify integrity of the RVI design and to secure the CVAP technology. The measurement programs are to confirm vibration analysis results for reactor internals during preoperational and initial startup testing and to detemine the safety margin. One of the important basis for the measurement programs is test acceptance criteria. Therefore, this paper is on establishment of response instrumentation test acceptance criteria for APR1400 RVI CVAP. The established acceptance criteria show that the stress criteria of APR1400 RVI are more conservative values than those of the valid prototype plant(Palo Verde unit 1) and, the displacement criteria of the IBA and the UGS were established to 0.03 in and 0.01 in, respectively.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.308-318
• /
• 2000

This paper introduces the acceptance criteria for reinforced concrete moment frames based on structural testing of ACI in preparing and proposes criteria for acceptable limiting drift and energy dissipation ratios of reinforced concrete shear walls for structural testing. Limiting drift and energy dissipation ratios were examined for tests on shear walls having ductile type failures. Test data were analyzed and compared to results for a suggested acceptance criteria that involves a limiting drift that is a function of aspect ratio a limiting energy dissipation ratio that is a function of displacement ductility and damping.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.324-329
• /
• 2004

In this study, an application of crack morphology variables in the Leak-Before-Break(LBB) evaluation for nuclear piping systems is investigated, including influences on the leakage crack size and crack instability loads. The crack surface roughness and the number of flow turns as a function of the crack opening displacement are applied to LBB evaluations for KSNP pressurizer surge line, for which fatigue and stress corrosion cracking are considered as failure mechanisms. As a result, there would be a significant impact on safety margins to acceptance criteria for the surge line if crack morphology variables are applied additionally to the current regulatory guide without re-analyses for justification of safety factors being applied on the leakage crack size and piping loads for evaluations.

• 한국지진공학회논문집
• /
• 제5권6호
• /
• pp.47-54
• /
• 2001

가새형 소성 감쇠기는 에너지 소산 이력거동을 통해 강한 지진하중을 받는 구조물의 구조적 손상을 방지하거나 감소시킨다. 본 연구에서는 성능수준 만족을 위한 가새형 소성 금비기의 직접적인 설계 방법을 개발하였다. 많은 해석 시간이 요구되는 비선형 동적 시간이력해석 대신 비선형 정적해석법인 능력스펙트럼법을 이용하여 주어진 성능을 만족하기 위하여 필요한 유효 감쇠비를 구한 후 이를 이용하여 가새형 소성 감쇠기의 크기를 구하였다. 각 설계변수의 영향을 파악하기 위하여 단자유도계에서 구조물의 주기, 요구되는 탄성강도에 대한 항복강도의 비, 항목 후 강성비, 가새형 소성 감쇠기의 항복응력 등을 변수로 하여 해석을 수행하였다. 본 연구를 통해 제안된 방법을 5층과 10층 건물에 적용하여 검증하였다. 시간이력해석 결과, 제안된 방법에 따라 설계된 가새형 소성 감쇠기를 설치한 예제 구조물의 최대응답은 주어진 목표변위와 잘 일치하였다.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.766-775
• /
• 2015

The integrity assessment of reactor vessel internals should be conducted in the design process to secure the safety of nuclear power plants. Various loads such as self-weight, seismic load, flow-induced load, and preload are applied to the internals. Therefore, the American Society of Mechanical Engineers (ASME) Code, Section III, defines the stress limit for reactor vessel internals. The present study focused on structural response analyses of the upper guide structure upper flange. The distributions of the stress intensity in the flange body were analyzed under various design load cases during normal operation. The allowable stress intensities along the expected sections of stress concentration were derived from the results of the finite element analysis for evaluating the structural integrity of the flange design. Furthermore, seismic analyses of the upper flange were performed to identify dynamic behavior with respect to the seismic and impact input. The mode superposition and full transient methods were used to perform time-history analyses, and the displacement at the lower end of the flange was obtained. The effect of the damping ratio on the response of the flange was also evaluated, and the acceleration was obtained. The results of elastic and seismic analyses in this study will be used as basic information to judge whether a flange design meets the acceptance criteria.

• 대한전자공학회논문지SP
• /
• 제40권4호
• /
• pp.248-255
• /
• 2003

본 논문에서는 상호상관함수를 이용한 지문인식 기법을 제시한다. 본 기법은 특징추출, 지문정렬, 지문매칭으로 구성되는데, 이중에서 본 논문은 새로운 지문정렬 기법을 제안한다. 본 지문정렬 기법에서는 특징점의 융선방향 각도에 대해 상호상관함수를 적용하여 두 지문사이의 회전각도를 구하고, 그후 회전된 지문으로부터 두 지문간의 이동변위를 구하여 지문을 정렬한다. 본 정렬기법은 과도한 탐색에 의존하지 않고 두 지문의 회전각도와 이동변위를 구할 수 있다 제시된 기법으로 지문인식 실험을 한 결과 2.086%의 타인수락오류율(FAR)에 대해 17.299%의 본인거부오류율(FRR)을 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제43권1호
• /
• pp.127-145
• /
• 2012

One of the most important and challenging steps in seismic vulnerability and performance assessment of highway bridges is the determination of the bridge component damage parameters and their corresponding limit states. These parameters are very essential for defining bridge damage state as well as determining the performance of highway bridges under a seismic event. Therefore, realistic damage limit states are required in the development of reliable fragility curves, which are employed in the seismic risk assessment packages for mitigation purposes. In this article, qualitative damage assessment criteria for ordinary highway bridges are taken into account considering the critical bridge components in terms of proper engineering demand parameters (EDPs). Seismic damage of bridges is strongly related to the deformation of bridge components as well as member internal forces imposed due to seismic actions. A simple approach is proposed for determining the acceptance criteria and damage limit states for use in seismic performance and vulnerability assessment of ordinary highway bridges in Turkey constructed after the 1990s. Physical damage of bridge components is represented by three damage limit states: serviceability, damage control, and collapse prevention. Inelastic deformation and shear force demand of the bent components (column and cap beam), and superstructure displacement are the most common causes for the seismic damage of the highway bridges. Each damage limit state is quantified with respect to the EDPs: i.e. curvature and shear force demand of RC bent components and superstructure relative displacement.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.239-248
• /
• 2017

Friction dampers are displacement dependent energy dissipation devices which dissipate earthquake energy through friction mechanism and widely used in improving the seismic behavior of new structures and rehabilitation of existing structures. In this paper, the cyclic behavior of a friction damper with different friction materials is investigated through experimental tests under cyclic loading. The damper is made of steel plates, friction pads, preloaded bolts and hard washers. The paper aims at investigating the hysteretic behavior of three friction materials under cyclic loading to be utilized in friction damper. The tested friction materials are: powder lining, super lining and metal lining. The experimental results are studied according to FEMA-356 acceptance criteria and the most appropriate friction material is selected by comparing all friction materials results.

• 한국조경학회지
• /
• 제30권6호
• /
• pp.38-46
• /
• 2003

Perceived crowding is known as a necessary method to evaluate social carrying capacity in recreational settings. But according to the results of previous research, perceived crowding, use density, and satisfaction have shown weak and indirect correlations. The theory of visitors’ adjustment is one of several possible explanations for this poor relation. But the validity of the visitors’ adjustment theory has not been not inspected clearly. Therefore, the purposes of this study are to understand visitors’ adjustment theory and to examine visitors’ adjustment to the overuse of recreational settings. Study hypotheses were formulated through literature review and related to visitors’ adjustment in recreation density. Pour hypotheses were established and inspected with the case study, i.e., Rationalization : Visitors’ satisfaction isn't related to use density in recreation setting, 2) Product-shift : Preference norm is related to current use density, 3) Self-selection : Visitors’ satisfaction for the use level is generally high, and 4) Displacement : Norm interference is related to willingness to revisit. The case study was conducted during May and June,2001. According to the results of this survey, visitors adjust to overuse of recreation setting through rationalization and product shift (hypotheses l/2 acceptance). Current use density isn't related to visitors’ satisfaction and willingness to revisit (see table 3). And visitors’ preference norm is modified by situation (see table 4). Visitors’ satisfaction and willingness to revisit don't show a high correlation but moderately high (see table 5, hypothesis 3 acceptance). Differences between visitors’ preference norm and current use density is norm interference. Norm interference isn't related to willingness to revisit (see table 7). Therefore, the norm interference concept is not a useful method to explain visitors’ adjustment to the degree of overuse in a recreational setting (hypothesis 4 rejection). As for future directions, the following are proposed: 1) correctly understanding and reestablishing the visitor norm and norm interference concept, 2) introducing a composite research method to monitor visitors’ behavior and survey visitors’ attitudes and coping responses. These efforts would be helpful in the Planning and management of recreational settings to improve the quality of visitors’ experiences.