1 |
Min, K.W., Seong, J.Y. and Kim, J. (2010), "Simple design procedure of a friction damper for reducing seismic responses of a single-story structure", Eng. Struct., 32(11), 3539-3547.
DOI
|
2 |
Latour, M., Piluso, V. and Rizzano, G. (2014), "Experimental analysis on friction materials for supplemental damping devices", Construct. Build. Mat., 65, 159-176.
DOI
|
3 |
Latour, M., Rizzano, G. and Piluso, V. (2015), "Free from damage beam-to-column joints: Testing and design of DST connections with friction pads", Eng. Struct., 85, 219-223.
DOI
|
4 |
Lee, S.H., Park, J.H., Lee, S.K. and Min, K.W. (2008), "Allocation and slip load of friction dampers for a seismically excited building structure based on storey shear force distribution", Eng. Struct., 30(4), 930-940.
DOI
|
5 |
Li, C. and Reinhorn, A.M. (1995), "Experimental and analytical investigation of seismic retrofit of structures with supplemental damping: Part II-Friction devices", Technical report NCEER-950009; State University of New York, Buffalo, NY, USA.
|
6 |
Maleki, S. and Mahjoubi, S. (2013), "Dual-pipe damper", J. Constr. Steel Res., 85, 81-91.
DOI
|
7 |
Montuori, R. Nastri, E. and Piluso, V. (2013), "Theory of plastic mechanism control for the seismic design of braced frames equipped with friction dampers", Mech. Res. Commun., 58, 112-123.
|
8 |
Montuori, R., Nastri, E. and Piluso, V. (2016), "Influence of connection typology on seismic response of MR-Frames with and without set-backs'", Earth. Eng. Struct. Dyn., 46(1), 5-25.
DOI
|
9 |
Nims, D.K., Inaudi, J.A., Richter, P.J. and Kelly, J.M. (1993), "Application of the energy dissipating restraint to buildings", Proceedings of ATC 17-1 on Seismic Isolation, Energy Dissipation, and Active Control, San Francisco, CA, USA, March.
|
10 |
Mualla, I. and Beleve, B. (2002), "Peformance of steel frames with a new friction damper device under earthquake excitation", J. Eng. Struct., 24(3), 365-371.
DOI
|
11 |
Pall, A. and Marsh, C. (1981), "Response of friction damped braced frames", J. Struct. Div., 108(6), 1313-1323.
|
12 |
Papadopoulos, P.K., Salonikios, T.N., Dimitrakis, S.A. and Papadopoulos, A.P. (2013), "Experimental investigation of a new steel friction device with link element for seismic strengthening of Structures", Struct. Eng. Mech., Int. J., 46(4), 487-504.
DOI
|
13 |
Park, J.H., Min, K.W., Chung, L., Lee, S.K., Kim, H.S. and Moon, B.W. (2007), "Equivalent linearization of a friction damper-brace system based on the probability distribution of the extremal displacement", Eng. Struct., 29(6), 1226-1237.
DOI
|
14 |
Saeed Monir, H. and Zeynali, K. (2013), "A modified friction damper for diagonal bracing of structures", J. Constr. Steel Res., 87, 17-30.
DOI
|
15 |
Vaseghi, A., Navayinia, B. and Navaei, S. (2011), "Evaluation of performance of eccentric braced frame with friction damper", Struct. Eng. Mech., Int. J., 39(5), 717-732.
DOI
|
16 |
Symans, M.D. and Constantinou, M.C. (1999), "Semi-active control systems for seismic protection of structures: A state-ofthe-art review", J. Eng. Struct., 21(6), 469-487.
DOI
|
17 |
Tremblay, R. and Stiemer, S. (1993), "Energy dissipation through friction bolted connections in concentrically braced steel frames", ATC 17-1, Seminar Seismic Isolation, pp. 557-568.
|
18 |
Wu, B., Zhang, J., Williams, M.S. and Ou, J. (2005), "Hysteretic behavior of improved Pall typed frictional dampers", Eng. Struct., 27(8), 1258-1267.
DOI
|
19 |
Xu, Y.L. and Ng, C.L. (2006), "Seismic response control of a building complex utilizing passive friction damper: Analytical study", Struct. Eng. Mech., Int. J., 22(1), 85-105.
DOI
|
20 |
Xu, L., Fan, X., Lu, D. and Li, Z. (2016), "Hysteretic behavior studies of self-centering energy dissipation bracing system", Steel Compos. Struct., Int. J., 20(6), 1205-1219.
DOI
|
21 |
Zahrai, S.M, Moradi, A. and Moradi, M.R. (2015), "Using friction dampers in retrofitting a steel structure with masonry infill panels", Steel. Compos Struct., Int. J., 19(2), 309-325.
DOI
|
22 |
Bhaskararao, A.V. and Jangid, R.S. (2006), "Seismic analysis of structures connected with friction dampers", Eng. Struct., 28(5), 690-703.
DOI
|
23 |
Aiken, I.D. and Kelly, J.M. (1990), "Earthquake simulator testing and analytical studies of two energy-absorbing systems for multistory structures", Report no. UCB/EERC-90/03; Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
|
24 |
Aiken, I.D., Nims, D.K., Whittaker, A.S. and Kelly, J.M. (1993), "Testing of passive energy dissipation systems", Earthq. Spect., 9(3), 335-369.
DOI
|
25 |
ANSYS (2013), ANSYS Element Reference; Release 14.5, ANSYS Inc.
|
26 |
Castaldo, P. and Tubaldi, E. (2015), "Influence of FPS bearing properties on the seismic performance of base-isolated structures", Earth. Eng. Struct. Dyn., 44(15), 2817-2836.
DOI
|
27 |
Cheng, Ch. and Chen, F. (2014), "Seismic performance of a rocking bridge pier substructure with frictional hinge dampres", Smart. Struct. Syst., Int. J., 14(4), 501-516.
DOI
|
28 |
Cherry, S. and Filiatrault, A. (1990), "Seismic design spectra for friction-damped structures", J. Struct. Div., 116(5), ASCE.
|
29 |
Colajannio, P. and Papia, M. (1995), "Seismic response of braced frames with and without friction dampers", Eng. Struct., 17(2), 129-140.
DOI
|
30 |
Constantinou, M.C., Tsopelas, P, Hammel, W. and Sigaher, A.N. (2001), "Toggle-brace-damper seismic energy dissipation systems", J. Struct. Eng., 127(2), 105-112.
DOI
|
31 |
Dorka, U., Pradlwarter, H.J. and Schuëller, U. (1998), "Reliability of MDOF-system with hysteretic devices", Eng. Struct., 20(8), 383-391.
|
32 |
ISIRI-586 (2011) Brake Pads and Linings; Test methods and specifications, Institute of Standards and Industrial Research of Iran, Tehran, Iran.
|
33 |
Fallah, N. and Honarparast, S. (2013), "NSGA-II based multiobjective optimization in design of Pall friction dampers", J. Constr. Steel Res., 89, 75-85.
DOI
|
34 |
FEMA-356 (2000), Pre-standard and Commentary for the Seismic Rehabilitation of Buildings; Federal Emergency Management Agency (FEMA), Washington, D.C., USA.
|
35 |
Fitzgerald, T.F., Anagnos, T., Goodson, M. and Zsutty, T. (1989), "Slotted bolted connections in a seismic design of concentrically braced connections", Earthq. Spect., 5(2), 383-391.
DOI
|
36 |
ISIRI-3100 (2012), Specify gravity of brake lining material; nstitute of Standards and Industrial Research of Iran, Tehran, Iran.
|
37 |
Kelly, J.M., Skinner, R.I. and Heine, A.J. (1972), "Mechanisms of energy absorption in special devices for use in earthquake resistant structures", J. Earthq. Eng., 5(3), 63-88.
|