• Wind and Structures
• /
• v.4 no.1
• /
• pp.31-44
• /
• 2001

Mean concentrations of ammonia gas released as a tracer from an isolated low-rise building have been measured and predicted. Predictions were calculated using computational fluid dynamics (CFD) and two dispersion models: a diffusion model and a Lagrangian particle tracking technique. Explicit account was taken of the natural variation of wind direction by a technique based on the weighted summation of individual steady state wind direction results according to the probability density function of the wind direction. The results indicated that at distances >3 building heights downstream the weighted predictions from either model are satisfactory but that in the near wake the diffusion model is less successful. Weighted solutions give significantly improved predictions over unweighted results. Lack of plume spread is identified as the main cause of inaccuracies in predictions and this is linked to inadequate resolution of flow features and mixing in the CFD model. Further work on non-steady state simulation of wake flows for dispersion studies is recommended.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.165-169
• /
• 2007

Qualification test range for Lox/Kerosene gas generator cyle liquid rocket engine was determined by considering engine dispersion and flight inlet conditions. With various pump characteristics, the operation range of components and system was investigated through dispersion analysis. The variation of engine performance shows opposite trends in calibration and dispersion.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.219-227
• /
• 2016

Valsartan, a drug for the treatment of cardiovascular disease, exhibited low bioavailability which was caused by, at least in part, limited solubility at low pH. Present investigation deals with the preparation and characterization of gastro-retentive drug delivery system (GRDDS) using valsartan solid dispersion. We prepared solid dispersion using surfactants (Poloxamer 407) and alkalizer ($Na_2CO_3$) which may to be useful for improving solubility of valsartan at low pH and evaluated by saturated solubility of valsartan in distilled water. Valsartan gastro-retentive (GR) tablets containing solid dispersion prepared and evaluated by weight variation, floating time and dissolution rate. Compression at lower pressures resulted in the tablets floating over simulated gastric fluid (pH 1.2) for more than 17 h. In vitro release of valsartan from GR tablet was dependent on the amount of poloxamer 407 and hydroxypropyl methylcellulose. On the basis of evaluation parameter, formulation E-3 was selected as a final formulation. Therefore, it can be concluded that the GR tablets containing solid dispersion may be exploited successfully for the delivery of poorly drug such as valsartan.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.325-325
• /
• 2018

The main purpose of this study is to suggest the more reliable flow direction methods within the framework of DEM by investigating the existing methodologies. To this end SFD(single flow direction method), MFD(multiple flow direction method) and IFD(Infinite flow direction method) are applied to determination of flow direction for water particles in Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation. As the main results the different patterns of flow accumulation are found out from each application of flow direction methods. As the flow dispersion increases on DEM contributing areas to outlet grow in sequence of SFD, IFD, MFD but contribution of individual pixels into outlet decreases. Especially MFD and IFD tend to make additional hydrologic abstraction from rainfall excess due to the flow dispersion within flow paths on DEM. Based on parameter estimation for power law distribution by maximum likelihood flow accumulation can be thought of as scale invariance factor. Combination of several flow direction methods could give rise to the more realistic water flow on DEM through separate treatment of flow direction methods for dispersion and aggregation effects of water flow within different topographies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.735-744
• /
• 2006

In this paper, the optimum pump light powers of optical phase conjugator(OPC) are numerically investigated as a function of amplifier spacing in 1,200 km $8{\times}40$ Gbps WDM systems with 0.1, 0.4, 0.8, or 1.6 ps/nm/km dispersion coefficient. It is confirmed that the variation of optimal pump light power dependence on amplifier spacing for NRZ transmission system is smaller than that for RZ transmission system through the evaluations and analysis of eye opening penalty(EOP) characteristics. And, in both cases of NRZ and RZ transmission, the variation of optimal pump light power is more increased as amplifier spacing becomes longer. Additionally, it is confirmed that the best amplifier spacing in NRZ and RZ transmission system is 50 km.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.126-132
• /
• 2010

A Lamb wave guided by a plate structure has dispersive characteristics because phase and group velocity change with the variation of frequency and thickness. The Lamb wave has two modes, symmetric and anti-symmetric mode, which propagates symmetrically and non-symmetrically with respect to centerline. In this paper, the derivation of Lamb wave equation with anisotropic material property is investigated. The phase velocity and group velocity dispersion curves are shown using the stiffness matrix of composite materials with the variation of angle.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.1
• /
• pp.55-62
• /
• 1988

The variation of electrical resistivity of silver particle-filled polymers with the volume percent of silver particles was investigated. Also, the relationships between the surface tension of polymer and dispersion effect of silver particles were studied to find the steep drop of electrical resisivity, in view of agglomerate morphology. The critical volume precent of silver particles varied depending on the polymer species and increased with the increasing surface tension of polymer. The steep variation of resistivity with the increasing temperature was explained with the expansion of polymer at the melting temperature of polymer. The conductive break down current increased with the increasing volume percent of silver particles in the Ag/LDPE system and that was attributed to heat of Joule taken througn the contact area between the silver particle.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.141-150
• /
• 2000

In order to genralize the vertical dispersion of plume at long distances on mesoscale over complex terrain dispersion coefficients data have been obtained systematically according to lapsed time after release by using a composite turbulence water tank that simulates convective boundary layer. Dispersion experiments have been carried out for various combined conditions of thermal turbulence intensity mechanical turbulence intensity and plume release height at slightly to moderately unstable conditions. Results of tracer dispersion experiments conducted using water tank camera and image processing system have been converted into atmospheric dispersion data through the application of similarity law. The equation $\sigma$z/Zi=aX/(b+c X2)0.5 where $\sigma$2; vertical dispersion coefficient zi : mixing height X : dimen-sionaless downwind distance was confirmed to be an appropriate and general equation for expressing $\sigma$2 variation with turbulence intensity and plume release height, The value of "a" was found to be principally affected by mechanical turbulence intensity and that of "b" by mechanical turbulence intensity and release height. It was confirmed that the magnitude of "c" varies with release height. Results of water tank experiments on the relationship of $\sigma$2 vs downwind distance x have been compared with actual atmospheric dispersion data such as CONDORS data and Bowne's nomogram Operating conditions of a composite turbulence water tank for simulating the field turbulence situations of CONDORS experiments and Bowne's $\sigma$2(x) nomogram for suburban area have also been investigated in terms of water temperature difference between convection water tank and bottom plate heating tank grid plate stroke mixing water depth length scale and velocity scale. Moreover the effect of mechanical turbulence intensity on vertical dispersion has been discussed in the light of release height and downwind distance. height and downwind distance.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.575-586
• /
• 2003

In case of continuous input of a pollutant, dispersion characteristics do not change much with changing dispersion coefficient, but that of an instantaneous input is very sensitive to the changes of dispersion coefficient. The characteristics of behavior of instantaneous input of a pollutant at the downstream of Han river were analyzed in this paper Field measurement of hydraulic and water quality factors at the downstream of Han river were conducted at low flow condition. The hydraulic factors were used to estimate the longitudinal dispersion coefficient, and the reasonable empirical equations for longitudinal dispersion coefficient at the downstream of Han river were suggested. The measured concentrations of BOD were closely matched with the calculated ones from RMA-4 model. In case of instantaneous input, range of dispersion, transport pathway and the traveltimes of the first and maximum concentration with variation of the longitudinal dispersion coefficients and water levels of downstream boundary were evaluated in this paper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.389-393
• /
• 2002