• Composites Research
• /
• v.24 no.6
• /
• pp.1-6
• /
• 2011

A new water-soluble and self-doped poly(styrenesulfonic acid-graft-aniline), PSSA-g-PANI, for dispersing carbon nanotubes (CNTs) in water was synthesized and its ability to stabilize aqueous CNT dispersions was examined. It was observed that the PANI in PSSA-g-PANI, which has benzoid and quinoid structure, was strongly adsorbed onto the nanotube surface via a strong ${\pi}-{\pi}$ interaction, and thus only gentle sonication causes exfoliation of CNT ropes to small bundles and the long-term stability of their resulting dispersions was much better than commercial surfactants. Furthermore, when thin films of PSSA-g-PANI/CNT are prepared from aqueous dispersion and their electrical conductivities are measured by the four probe technique, it is observed that their conductivities are in the range of 1.5-2.5 S/cm.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.218-230
• /
• 1999

The purpose of this study is -under the post-modem situation- to emphasize the role of women which has various several logic on feminism, to look forward to division of men's consciousness of women, and to reflect a trend to accept the role of sex which is occurring in the system of sex, that is, 'The Third Gender and Homosexuality'. The category of biological and sociocultural on feminism discussed, meantime expressed the sexual logic under post-modern situation, and probed the sexual logic on feminism which was expressed in modem dress and its ornaments by redefining some characters as follows; Imitation-it was to attain masculinity by imitating the body of the opposite sex. Interaction such situations like...... masculinity in women, feminity in men was demonstrated as transvestism of cross-dressing and the symbolic meaning of homosexuality was demonstrated in the shoes of sociocultural on Feminism. Dispersion appeared as a moderation charm and a resistance against the men-ruling culture. Destruction-expressed the fetishism of punk of porny image and maternal affectional image of biological trend as playful satire. Therefore, It is conceived that Feminism would be created true human-phase come true in the men's world as long as the realization of women themselves make the phase of women higher; and further not only propose new image of women but the system of gender.

• Ceramist
• /
• v.23 no.2
• /
• pp.200-210
• /
• 2020

Supported catalysts are at the heart of manufacturing essential chemical, agricultural and pharmaceutical products. While the longevity of such systems is critically hinged on the durability of metal nanoparticles, the conventional deposition/dispersion techniques are difficult to enhance the stability of the metal nanoparticles due to the lack of control over the interaction between metal-support. Regarding this matter, ex-solution has begun to be recognized as one of the most promising methodologies to develop thermally and chemically robust nanoparticles. By dissolving desired catalysts as a cation form into a parent oxide, fine and uniformly distributed metal nano-catalysts can be subsequently grown in situ under reductive heat treatment, which is referred to ex-solution. Over the several years, ex-solved analog has resulted in tremendous progress in the chemical-electrochemical applications due to the exceptional robustness coupled with ease synthesis. Herein, we describe the ex-solution process in detail which therein introducing the unique characteristics of ex-solved particles that distinguish them from conventionally dispersed nanoparticles. We then go through the history of science regarding the ex-solution phenomena and summarize several major research achievements which embrace the ex-solved nanoparticles to markedly promote the catalytic performances. In conclusion, we address the remaining challenges and the future perspectives of this rapidly growing field.

• Journal of the Korean Institute of Gas
• /
• v.13 no.5
• /
• pp.26-32
• /
• 2009

Ni catalysts on mesoporous silica and commercial silica were prepared for the methanation. XRD and TPR analyses indicated that Ni/mesoporous silica had smaller metal particle size and higher metal dispersion than that of Ni/commercial silica. In addition, Ni/mesoporous silica had stronger metal-support interaction. In methanation, Ni/mesoporous silica showed higher CO conversion and methane yield (65%) than Ni/commercial silica (58%). In the characterization results of catalysts after reaction, Ni/commercial silica was deactivated by the collapse of structure and metal sintering, but Ni/mesoporous silica showed stable catalytic performance.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.146-156
• /
• 2019

New media art moves out of place and time constraints, sublimates the benefits of technology into art, and presents a new way of communication with the audience. This paper analyses the tendency of nonverbal communication methods by analysing examples of facial expressions and sound used in new media art from early times. As a result, it can be seen that the digital paradigm in the new media art has a nonlinear thinking, which makes a perceptual reduction of immersion and dispersion. The facial expression in new media art made it possible not only to overcome the limit of space and time of various expressions through 'visual distortions, enlargement, and virtualisation', but also to enable new ways of communication to display facial parts combined or separated in the digital environment. The sound in new media art does not stay in auditory sense, but pursues multi-sensory and synesthesia by cooperating with visual and tactile, evolves by revealing characteristics of space expansion and sensibility and interaction of audience.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.318-323
• /
• 2004

Cloud-point and bubble-point curves for poly(ethylene-co-13.8 mol% octene) ($PEO_{13.8}$) and Poly(ethylene-co-15.3 mol% octene) ($PEO_{15.3}$) were determined up to $150^{\circ}C$ and 450 bar in hydrocarbons which have different molecular size and structure. Whereas ($PEO_{15.3}$+ n-pentane) system has cloud-point and bubble-point type transitions, ($PEO_{15.3}$+ n-propane) and ($PEO_{15.3}$+ n-butane) systems do only cloud-point type transition. In cyclo-pentane, -hexane, -heptane, and -octane, $PEO_{15.3}$ has a bubble-point transition. ($PEO_{13.8}$+ n-butane) mixture has a critical mixture concentration at 5 wt% PEO. (PEO + hydrocarbon) mixtures exhibit LCST type behavior. Solubility of PEO increases with hydrocarbon size due to increasing dispersion interaction which is favorable to dissolve PEO.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.421-426
• /
• 2008

pH-responsive P(MAA-co-EGMA) hydrogel microparticles were synthesized via dispersion photo polymerization and the feasibility of the particles as the cosmetic formulation was investigated. Rh-B and the functional materials for the cosmetic application such as ascorbic acid, adenosine, EGCG, and arbutin were loaded in the P (MAA-co-EGMA) hydrogel microparticles in order to examine the interaction between the hydrogel and the loaded materials. In the loading experiments, Rh-B showed the highest loading efficiency to the P(MAA-co-EGMA) hydrogels due to the electrostatic attraction between the negative charge of the hydrogels and the positive charge of Rh-B at the ionized states. However, the functional materials showed relatively low loading efficiencies because of the electrostatic repulsions between the negative charges of both the hydrogels and the materials at the ionized states. In addition, P(MAA-co-EGMA) hydrogel microparticles showed pH-responsive release behavior of Rh-B according to the external pH changes.

• Journal of Information Science Theory and Practice
• /
• v.6 no.4
• /
• pp.6-16
• /
• 2018

This article shows an approach to the study of two fundamental aspects of the prepublication of scientific manuscripts in specialized repositories (arXiv). The first refers to the size of the interaction of "standard papers" in journals appearing in the Web of Science (WoS)-now Clarivate Analytics-and "non-standard papers" (manuscripts appearing in arXiv). Specifically, we analyze the citations found in the WoS to articles in arXiv. The second aspect is how publication in arXiv affects the citation count of authors. The question is whether or not prepublishing in arXiv benefits authors from the point of view of increasing their citations, or rather produces a dispersion, which would diminish the relevance of their publications in evaluation processes. Data have been collected from arXiv, the websites of the journals, Google Scholar, and WoS following a specific ad hoc procedure. The number of citations in journal articles published in WoS to preprints in arXiv is not large. We show that citation counts from regular papers and preprints using different sources (arXiv, the journal's website, WoS) give completely different results. This suggests a rather scattered picture of citations that could distort the citation count of a given article against the author's interest. However, the number of WoS references to arXiv preprints is small, minimizing this potential negative effect.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.4
• /
• pp.189-201
• /
• 2023

PURPOSE. The aim of this study was to investigate the mechanical properties of three-dimensional (3D) printed denture base resin incorporating microcapsules containing plant essential oils. MATERIALS AND METHODS. Denture base specimens containing up to 3% w/v essential oil microcapsule powders (MCPs), i.e., eucalyptus, geranium, lavender, menthol, and tea tree, in two resins (Detax and NextDent 3D+) were 3D printed using two printers (Asiga and NextDent 5100). The dispersion and interaction of the MCPs in the resin were assessed by SEM while the mechanical properties of the incorporated denture base including flexural strength (MPa), flexural modulus (MPa), Vickers hardness (VHN), and surface roughness (Ra) were also subsequently evaluated. Statistical analysis of any differences in mean values was determined using a two-way ANOVA with Tukey's post hoc testing (α = .05). RESULTS. The spherical shape of the MCPs was maintained during the mixing and polymerization/printing process. However, the Detax-Asiga group showed significant agglomeration of the MCPs even at the lowest MCP concentration levels (0.5% w/v). Overall, as the microcapsule concentration increased, the mean flexural strength decreased, though the menthol MCP groups remained compliant with the ISO standard. The flexural modulus and harness remained relatively unchanged, and the flexural modulus complied with the ISO standard regardless of the MCP concentration. Surface roughness increased with the addition of the MCPs but also remained below that required for clinical acceptance. CONCLUSION. Incorporation of microencapsulated plant essential oils into 3D printed denture base resin was successfully achieved. While incorporation negatively influenced flexural strength and surface roughness, little effect on flexural modulus and Vickers hardness was demonstrated.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.120-129
• /
• 1995

Since the rate and completeness of combustion in direct injection engines were controlled by the characteristics of gas flow fields and sprays, an understanding of those was essential to the design of the direct injection engines. In this study the numerical simulations of swirl effects on the characteristics of gas flow fields and sprays were performed using the spray model that could predict the interactions between gas fields and spray droplets. The governing equations were discretized by the finite volume method and the modified k- e model which included the compressibility effects due to the compression/expansion of piston was used. The results of numerical calculation of the spray characteristics in the quiescent environment were compared with the experimental data. There were good agreements between the results of calculation and the experimental data, except in the early stages of spray. In the motoring condition, the results showed that a substantial air entrainment into the spray volume was emerged and hence the squish motion was relatively unimportant during fuel injection periods. As the swirl ratio increased, the evaporation rate was increased due to the wide dispersion of the spray droplets and the strong interaction between spray droplets and gas fields.