• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.491-506
• /
• 2015

Propagation of the generalized Rayleigh waves in an initially stressed elastic half-space covered by an elastic layer is investigated. It is assumed that the initial stresses are caused by the uniformly distributed normal compressional forces acting on the face surface of the covering layer. Two different cases where the compressional forces are "dead" and "follower" forces are considered. Three-dimensional linearized theory of elastic waves in initially stressed bodies in plane-strain state is employed and the elasticity relations of the materials of the constituents are described through the Murnaghan potential where the influence of the third order elastic constants is taken into consideration. The dispersion equation is derived and an algorithm is developed for numerical solution to this equation. Numerical results for the dispersion of the generalized Rayleigh waves on the influence of the initial stresses and on the influence of the character of the external compressional forces are presented and discussed. These investigations provide some theoretical foundations for study of the near-surface waves propagating in layered mechanical systems with a liquid upper layer, study of the structure of the soil of the bottom of the oceans or of the seas and study of the behavior of seismic surface waves propagating under the bottom of the oceans.

• Archives of Pharmacal Research
• /
• 제9권1호
• /
• pp.39-43
• /
• 1986

Bovine serum albumin microspheres containing cytarabine were prepared using cross-linking agent, formaldehyde. The shape and the size distribution of them were observed. The shape of them was spherical and the susrface was compact and smooth. The size distribution of them was affected by dispersion forces during emulsfication. The release of cytarabine from albumin microspheres was dependent upon cross-linking time, amount of cross-linking agent and drug/albumin ratio. However, the difference of drug release by the dispersion forces was not great. After release test, the shape of albumin microspheres was nonspherical and the albumin matrix seemed to be a little relaxed. The degradation tests of albumin microspheres by the proteolytic enzyme showed that albumin microspheres were progressively digested according to the cross-linking degree.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.11-19
• /
• 2018

Propagation of the generalized Rayleigh waves in an elastic half-space covered by an elastic layer for different initial stress combinations and imperfect contact conditions is investigated. Three-dimensional linearized theory of elastic waves in initially stressed bodies in plane-strain state is employed, the corresponding dispersion equation is derived and an algorithm is developed for numerical solution to this equation. Numerical results on the influence of the initial stress patterns and on the influence of the contact conditions are presented and discussed. The case where the external forces are "follower forces" is considered as well. These investigations provide some theoretical foundations for the study of the near-surface waves propagating in layered mechanical systems and can be successfully used for estimation of the degree of the bonded defects between layers, fault characteristics and study of the behavior of seismic surface waves propagating under the bottom of the oceans.

• 폴리머
• /
• 제25권5호
• /
• pp.671-678
• /
• 2001

Sodium 또는 zinc로 중화된 poly(ethylene-co-methacrylic acid)의 아이오노머는 ethylene 사슬 부분들로만 이루어진 결정상, acid 그룹이 존재하는 amorphous 영역, 그리고 ionic aggregate의 세 가지 상으로 나누어진다. Soaking에 의하여 흡수된 nonionic dye 분자들은 결정상을 제외한 amorphous 부분이나 ionic aggregate 분근에 존재하는데, 주위 사슬의 극성에 따라 dispersion force (ethylene 사슬 부분), polar force (acid 부분), ionic dipole (ionic aggregate 부분)의 세 가지 다른 힘의 영향 아래 놓이게 된다. 극성이 적은 ethylene 사슬부분의 dispersion force 영향 아래에 존재하는 Nile Red의 UV/Vis 흡수피크는 500nm 부근에서, polar한 acid 그룹의 영향을 받는 dye 피크는 525 nm, 그리고 ionic aggregate의 영향에 의한 dye는 Na+-아이오노머의 경우 550 nm, divalent이어서 더 큰 ionic dipole을 가지는 $Zn^{2+}$-아이오노머의 경우 610nm에서 각각 피크가 나타났다.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.597-615
• /
• 2019

The paper studies the dispersion of the axisymmetric longitudinal wave propagating in the "hollow cylinder + surrounding medium" system with inhomogeneous initial stresses caused by the uniformly distributed radial compressional forces acting at infinity. Up to now in the world literature, there exist only a few investigations related to the wave dispersion in a hollow cylinder with inhomogeneous initial stresses. Therefore, this paper is one of the first attempts in this field in the sense of the development of investigations for the case where the cylinder is surrounded with an infinite medium. The three-dimensional linearized theory of elastic waves is used for describing the considered wave propagation problem and, for a solution to the corresponding mathematical problem, the discrete-analytical solution method is developed and employed. The corresponding dispersion equation is obtained and this equation is solved numerically and, as a result of this solution, the dispersion curves are constructed for the first and second modes. By analyzing these curves, the character of the influence of the inhomogeneous initial stresses on the dispersion curves is established. In particular, it is established that as a result of the inhomogeneity of the initial stresses both new dispersion curves and the "band gap" for the wave frequencies can appear.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.957-959
• /
• 2014

The wave analysis of cylinders combined rigidly with a finite plate to identify the effect of the plate on the wave propagation. This paper uses the mobility and impedance coupling method to combine a infinite-length cylinder with the plate, and obtains the coupling forces induced by the vibration of the structure. The waveguide finite element method is used to calculate the wave characteristics of the cylinder excited by the forces. From the results, the dispersion diagram can be obtained. It contains the characteristics induced by the vibration and length of the internal plate. It also shows the wave propagation of elastic waves sustained in the cylinder.

• Structural Engineering and Mechanics
• /
• 제68권6호
• /
• pp.701-711
• /
• 2018

Herein, the thermo-magneto-elastic wave dispersion answers of functionally graded (FG) double-nanobeam systems (DNBSs) are surveyed implementing a nonlocal strain gradient theory (NSGT). The kinematic relations are derived employing the classical beam theory. Also, scale influences are covered precisely in the framework of NSGT. Moreover, Mori-Tanaka homogenization model is introduced in order to obtain the effective material properties of FG nanobeams. Meanwhile, effects of external forces such as thermal and Lorentz forces are included in this research. Also, based upon the Hamilton's principle, the Euler-Lagrange equations are developed; afterwards, these equations are incorporated with those of NSGT to reach the nonlocal governing equations of FG-DNBSs. Furthermore, according to an analytical approach, the governing equations are solved to obtain the wave frequencies and phase velocities of FG-DNBSs. At the end, some illustrations are rendered to clarify the influences of a wide range of involved parameters.

• 한국해안·해양공학회논문집
• /
• 제27권5호
• /
• pp.315-323
• /
• 2015

이상 기후현상으로 인해 폭풍의 강도가 커지고, 지속시간 또한 길어지고 있어 연안 피해가 점차 대규모화 되고 있다. 이러한 변화에 대응하기 위하여 기존 방파제에 대한 평가기준과 신설 방파제의 설계기준이 강화되고 있다. 최근 케이슨식 방파제의 구조적 안정성을 향상시키기 위하여 개별 케이슨이 독립적으로 파에 저항하도록 하였던 방파제 케이슨을 서로 인터로킹시키는 방안이 관심을 받고 있다. 이는 각각의 케이슨에 작용하는 힘을 분산시켜 이상파랑이 발생할 경우에도 최대파력이 저감되어 방파제의 안정성을 확보할 수 있도록 한 것이다. 본 연구에서는 케이블을 이용하여 케이슨 상부를 방파제 기준선방향으로 인터로킹시켰을 때의 파력의 분산특성에 대해서 분석하였다. 수치계산의 효율을 위해 지반과 연결 케이블은 선형 스프링으로 모형화하고 케이슨은 강체로 가정한 정적 선형모델을 개발하였다. 수치해석 결과, 입사각이 커질수록 케이블을 통하여 전달되는 파력비가 높아지고, 인터로킹 케이블의 강성이 클수록 전달 파력비가 증대되어 파력분산 효과가 높아지는 특성을 확인할 수 있었다.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1060-1071
• /
• 2005

Passive gas dispersions over a 1/1000 scale terrain model at Eiffel type wind tunnel were reproduced by numerical simulation. Large eddy simulation was used to treat the sub-grid scale turbulences. The terrain features were represented by millions of point forces densely distributed over the solid surface using the virtual boundary method. The model simulations agreed very well with the experiments in a consistent fashion for all wind directions. The measured profiles of the wind speeds as well as the tracer gas concentrations were nicely simulated by the CFD model at most locations scattered over the model terrain. With scale factor adjusted and the thermal stratification effects incorporated, the CFD model was expected to provide reliable information on pollutant dispersions over the real complex terrains.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.214-222
• /
• 1996

The effect of physicochemical properties of organic solvent and dispersant among organic solvent dispersant binder and plasticizer which are used as processing additives in MLCC fabrication process on the dispersion of BaTiO3 was studied. The steric and electrostatic stabilization mechanisms in dispersion of BaTiO3 in organic media were evaluated respectively. The sttability of BaTiO3 achieved bysteric stabilization was dependent on the fraction of surface coverage of dispersant adsorption on BaTiO3. The electrostatic repulsive forces of BaTiO3 particles dispersed in orgainc media was found to be appreciabley great and dependent mainly on the kinds of organic solvent used. The mechanism affecting the stability of BaTiO3 was studied by the method of rheologi-cal behaviors of BaTiO3 suspension.