• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.341-347
• /
• 2008

Laminated LTCC components of high integrity, fabricated by thick film process, are applied to industrial field of IT technology along with miniaturization trend of electronic devices. Dispersion states were examined by several evaluation methods with MLS-22, which is one of commercial LTCC powders, to achieve optimal dispersion as basis for stable LTCC fabrication process. Slurry viscosity, surface roughness of dip-coated slide glass, sedimentaion of slurry, and SEM observation of dried surface were utilized with respective amount change of various commercial dispersants. Among these commercial dispersants, optimal dispersion state was obtained with 0.4 wt% of BYK-111, from the results of various evaluation methods.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1993년도 추계학술대회논문집
• /
• pp.113-123
• /
• 1993

In a sensory evaluation, the data obtained by a result of evaluation have a wide dispersion and fuzziness because human sense organ is used as a means of measuring sensation instead of measuring instruments. These dispersion and fuzziness are caused by all kinds of time error and have a great influence on a sensory evaluation, but most of previous papers don't deal with these time errors. In this study, a comparative judgement capacity of an evaluator is discriminated by means of the eigen-structure analysis on the premise that evaluation value of sensory evaluators obtained by a paired-comparison become different by the order of sample presentation

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.59-60
• /
• 2021

To measure the effect of the stress-strain dispersion across the installed waterproofing layer on the concrete surface, a strain gauge was attached to the gap between the waterproofing layer and the concrete structure at specified points of upper, center and bottom of the load-displacement simulation specimen, and the peak stress-strain at the displacement interface were measured and compared with stress-strain at other areas to analyze each material types' stress-strain dispersion ratio properties. Based on the results of the testing, it was shown that materials with high load-displacement resistance performance accordingly had high stress-strain dispersion ratio results, and the materials from highest performance to lowest performance were; CAS, SAS, PUC and CSC.

• 한국입자에어로졸학회지
• /
• 제13권3호
• /
• pp.133-139
• /
• 2017

In this paper, we proposed an emulsification method without using an emulsifier and investigated the effects of particle size distribution in fluids on dispersion stability. Surfactant-free oil in water emulsion was prepared with 1 % (w/w) of olive oil by using high speed agitation, high pressure and ultrasonic dispersion methods. The particle size, microscopic observation, and dispersion stability of each sample were evaluated and dispersion stability according to various dispersion methods was compared. As a result, the emulsion dispersed by the ultrasonic dispersion method showed the smallest particle size and uniform distribution of $0.07{\sim} 0.3{\mu}m$ and was the most stable in a 7 days stability evaluation. In the above experiment, four olive oil emulsions having different particle sizes were prepared using ultrasonic dispersion technology that was capable of producing stable emulsions. The dispersion stability of each samples with oil droplet sizes of (A) 0.1 to $0.5{\mu}m$, (B) 0.3 to $4{\mu}m$, (C) 1 to $10.5{\mu}m$ and (D) 2 to $120{\mu}m$, was observed for 7 days, and the relationship between the stability and performance was studied. Emulsion (A) with particle size less than $0.5{\mu}m$ displayed the dispersion stability showing below 5 % change in a 7 days stability evaluation. In the case of (B), (C), and (D) that had larger particle than $0.5{\mu}m$, the changes of dispersion stability were 10 %, 13 % and 35 % respectively. From these results, it was proved that dispersion stability of emulsion with uniform particle size of $0.5{\mu}m$ or less was confirmed to be very stable.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.133-140
• /
• 2001

Recently, to assure the integrity of a structural components such as piping pressure vessels and thinning structure, Lamb wave inspection technique has been used in material evaluation. It is very important to select the optimal Lamb wave mode and to analyze the signal accurately because of its unique dispersion properties grnerating several modes within the speci-men. It this study, the feasibility of material evaluation applications using wavelet analysis of Lamb wave has been veir-fied experimentally. These results show as follows; 1)dispersion characteristic of each mode in dispersion curve is demon-strated that A0 mode propagating material surface is useful mode having the lest energy loss and not sensitive to surface condition. 2) it can be detected even the micro defect ($1\times2mm$) fabricated in ultrasonic probe flaw distance (290mm) to axis direction. 3) the wavelet transform which is called "time-frequency analysis" shows the Lamb wave propagation due to the change of materials characterization can be evaluated at each frequency and experimental group velocity of Lamb wave agrees quite well with that of simulated dispersion curve.ion curve.

• 대한인간공학회지
• /
• 제12권2호
• /
• pp.85-91
• /
• 1993

Data obtained for sensory evaluation have a wide dispersion and fuzziness since human sensory organs are used as a means of measuring sensation instead of measuring instruments. Such dispersion and fuzziness are caused by all kinds of time error and have a great influence on the sensory evaluation, but most of previous papers not consider time errors. In this study, the comparative judgement capability of the evaluator was discriminated by means of the eigen- structure analysis on the premise that evaluation values of sensory evaluators obtained by a paired-comparison become different by the order of sample presentation.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.224-230
• /
• 2007

This work is aimed to explore a possibility of using the generalized Lamb waves for nondestructive evaluation of the bonding quality of layered substrates. For this purpose, we prepared two sets of specimens with imperfect bonding at their interfaces; 1) TiN-coated specimens with various wear conditions, and 2) CVD diamond specimens with various cleaning conditions. A dispersion simulation performed for layered substrates with imperfect interfaces are carried out to get the characteristics of dispersion curves that can be used for bonding quality evaluation. Then the characteristics of dispersion curves of the fabricated specimens are experimentally determined by use of an ultrasonic backward radiation measurement technique. The results obtained in the present study show that the lowest velocity mode (Rayleigh-like) of the generalized Lamb waves are sensitively affected by the bonding quality. Therefore, the generalized Lamb waves can be applied for nondestructive evaluation of imperfect bonding quality in various layered substrates.

• 비파괴검사학회지
• /
• 제27권2호
• /
• pp.148-156
• /
• 2007

섬유복합재료의 역학적인 관점에서 볼 때 PVA-ECC (polyvinyl alcohol-engineered cementitious composite)의 섬유분산성 평가는 매우 중요한 요소이다. 그러나 PVA 섬유의 낮은 명암비 때문에 시멘트계 재료와 섬유를 구별하기가 어려우므로, PVA-ECC의 섬유분산성 평가를 하기에는 어려운 점이 있다. 이 연구에서는 이러한 문제점을 해결하기 위하여 PVA-ECC 내의 섬유분산성을 평가할 수 있는 새로운 방법을 제시하였다. 형광의 원리를 이용하여 섬유복합재료 단면에서 PVA 섬유가 초록빛을 발하는 이미지를 얻었고, PVA-ECC 시편에 대한 섬유분산성은 형광 현미경에 부착된 CCD (charge coupled device) 카메라를 통하여 얻어진 이미지를 이미지 프로세싱 기법과 통계적인 방법을 이용하여 평가하였다. 또한 형상분석을 통하여 섬유의 방향성이 분산성에 미치는 영향을 파악하였으며, 판별함수기법과 분수령 알고리즘을 이용하여 섬유 검출 성능을 향상시킬 수 있는 기법을 제시하였다.

• KSBB Journal
• /
• 제31권4호
• /
• pp.219-227
• /
• 2016

Valsartan, a drug for the treatment of cardiovascular disease, exhibited low bioavailability which was caused by, at least in part, limited solubility at low pH. Present investigation deals with the preparation and characterization of gastro-retentive drug delivery system (GRDDS) using valsartan solid dispersion. We prepared solid dispersion using surfactants (Poloxamer 407) and alkalizer ($Na_2CO_3$) which may to be useful for improving solubility of valsartan at low pH and evaluated by saturated solubility of valsartan in distilled water. Valsartan gastro-retentive (GR) tablets containing solid dispersion prepared and evaluated by weight variation, floating time and dissolution rate. Compression at lower pressures resulted in the tablets floating over simulated gastric fluid (pH 1.2) for more than 17 h. In vitro release of valsartan from GR tablet was dependent on the amount of poloxamer 407 and hydroxypropyl methylcellulose. On the basis of evaluation parameter, formulation E-3 was selected as a final formulation. Therefore, it can be concluded that the GR tablets containing solid dispersion may be exploited successfully for the delivery of poorly drug such as valsartan.

• 환경영향평가
• /
• 제6권2호
• /
• pp.81-92
• /
• 1997

This paper presents the results from the comparison analysis and evaluation between the air pollutant dispersion modeling results and the observation data in the area within a 10 km radius from the Boryong thermal power plants. The observation data used in this study were the air pollutant concentrations which had been continuously measured from 8 locations around the Boryong power plants by TMS(tele-monitoring system) for 3 months from September to November, 1996. The short-term and long-term predictions were carried out using ISC3 model and LPDM(Lagrangian Panicle Dispersion Model). The results of ISC3 modeling in a short-term showed highly as 0.7 in a correlation coefficient, but in a long-term showed just 0.54. On the other hand, LPDM showed 0.78 in a correlation coefficient for a long-term, but in a short-term showed highly value than the observation concentrations.