• 제목/요약/키워드: Dispersion diagram

검색결과 55건 처리시간 0.023초

저밀도 심볼점과 고밀도 심볼점을 선택적으로 이용하는 블라인드 등화 (Blind Equalization Selectively Using Coarse Symbol Constellation and Dense Symbol Constellation)

  • 오길남
    • 한국통신학회논문지
    • /
    • 제39A권11호
    • /
    • pp.645-651
    • /
    • 2014
  • 블라인드 등화 시에, 송신된 심볼점과 이로부터 등가적으로 유도된 심볼점을 선택적으로 적용하여 오차를 발생시키고, 이를 이용하여 등화기를 갱신하는 방법을 제안한다. 제안 방법은 심볼 추정의 정확도 향상과 오차 개선에 효과적인 심볼점을 각각 적용하여 등화기 출력의 눈모형을 빠르게 열리게 하면서 동시에 오차 성능을 개선할 수 있음을 보였다. 심볼점을 적용하는 기준으로는 등화기 출력이 형성하는 심볼점들의 분산을 사용하였다. 아울러 등화기 갱신의 정확도를 높이기 위해 현재 및 이전 분산을 활용하여 오차를 조절하였다. 모의실험을 통해 잡음이 부가된 다중경로 채널 하에서 64-QAM에 대해 제안 방식의 등화 성능을 검증하였다.

충격파를 이용한 거시적 단속류 시뮬레이션 모형개발 (A Development of Macroscopic Simulation Model for Interrupted Flow using Shockwave)

  • 이호상;정영제;김영찬;김대호
    • 대한교통학회지
    • /
    • 제26권1호
    • /
    • pp.191-201
    • /
    • 2008
  • 단속류의 교통시설 운영개선(TSM, Trasportation Systems Management)의 타당성 및 개선효과 분석을 위해 TRANSYT-7F(T7F)와 NETSIM이 많이 사용되고 있으나, T7F는 현실적인 차량군의 압축 분산효과가 미흡하고, NETSIM은 구축시간이 과다하게 소요되고, 용량설정의 어려움 등의 문제를 가지고 있다. 이에 반해, 충격파 모형은 T7F에 비해 차량군의 압축 분산을 더욱 사실적으로 묘사할 수 있으며, NETSIM에 비해서는 분석시간 단축, 적용용이성 등의 장점을 가지고 있어 우수하다. 하지만, 수리적 계산의 어려움으로 인해 비현실적인 교통류관계식(Q-K곡선) 적용, 단순한 차량군 적용 등의 문제점을 지니고 있다. 이러한 충격파이론을 이용한 기존 분석모형의 문제점을 해소하기 위해보다 현실적인 교통류관계식 적용, 새로운 차량군모형 개발, 연장충격파 개념 도입 등 새로운 분석모형을 개발하였으며, 개발모형의 유효성 검증을 위해 다양한 시나리오를 구성하여 T7F와 NETSIM과 비교 평가한 결과 우수한 성능을 보였다.

The drivers and energetics of ionized gas outflows in powerful Type 2 AGN in the local Universe

  • Karouzos, Marios;Woo, Jong-Hak;Bae, Hyun-Jin
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.37.2-37.2
    • /
    • 2016
  • There exist scaling relations that link the mass of supermassive black holes with both the velocity dispersion and the mass of the central stellar cusp of their host galaxies. This implies that galaxies co-evolve with their central black holes, potentially through the feedback from actively accreting supermassive black holes (AGN). We use integral field spectroscopy data from the 8.2m Gemini-North telescope to investigate ionized gas outflows in luminous local (z<0.1) Type 2 AGN. Our sample of 6 galaxies was selected based on their [OIII] dust-corrected luminosity (>$10^{42}erg/s$) and signatures of outflows in the [OIII] line profile of their SDSS spectra. These are arguably the best candidates to explore AGN feedback in action since they are < 1% of a large local type 2 AGN SDSS sample selected based on their [OIII] kinematics. Expanding on previously reported results concerning the kinematic decomposition and size determination of these outflows, here we report their photoionization properties and energetics. We find strong evidence that connect the extreme kinematics of the ionized gas with AGN photoionization. The kinematic component related to the AGN-driven outflow is clearly separated from other kinematic components, such as gravitation- or stellar-driven motions, on the velocity and velocity dispersion diagram. Our spatially resolved kinematic analysis reveals that up to 90% of the mass and kinetic energy of the outflow is contained within the central kiloparcec of the galaxy. The total mass and kinetic energy of the outflow correlate well with the AGN bolometric luminosity, resulting in energy conversion efficiencies between 0.01% and 1%. Intriguingly, we detect ubiquitous signs of ongoing circumnuclear star formation. Their small size, the centrally contained mass and energy, and the universally detected circumnuclear star formation cast doubts on the potency of these AGN-driven outflows as agents of negative feedback.

  • PDF

외부 유체와 연성된 도파관의 진동 및 소음 해석 기법 (A Numerical Method for Analysis of the Sound and Vibration of Waveguides Coupled with External Fluid)

  • 유정수
    • 한국음향학회지
    • /
    • 제29권7호
    • /
    • pp.448-457
    • /
    • 2010
  • 단면의 형상이 길이방향으로 일정한 무한길이 도파관 구조물 (waveguide structures)에 대한 진동 및 파동전파 특성은 도파관유한요소법 (waveguide finite element method, WFEM)을 이용해 효과적으로 해석할 수 있다. 도파관유한요소법은 2차원 단면만을 FE 모델링하여 해석하므로 모델의 크기가 작고 연산시간이 짧다는 장점이 있다. 도파관 구조물이 외부 유체와 연성된 경우, 원통형 실린더 또는 파이프와 같이 단면의 형상이 단순한 경우에는 이론적 해석을 수행할 수 있다. 반면 복잡한 형상의 단면을 가진 도파관구조물이 유체와 연성된 경우에는 수치해석 방법이 요구된다. 외부 유체와 연성된 도파관 구조물은 외부 유체와 도파관유한요소 (WFE)를 연성시켜 해석하는 수치해석 방법을 고려할 수 있다. 본 논문에서는 외부 유체 모델링에 경계요소 (Boundary Element)를 도입하고 이를 도파관유한요소와 연성시킨 WFE/BE 방법을 소개한다. 이 방법의 적용 예로써 단순형상의 파이프에 대해 외부 유체의 유/무에 따른 분산선도와 가진점 모빌리티 (point mobility)를 구하고 이를 이론해석 결과와 비교하였다. 또한 WFE/BE 방법을 이용해 파이프에서 외부 유체로 방사되는 음향파워를 구하고 접수 유/무에 따른 영향을 살펴보았다.

금강 하구의 해수순환역학 (CIRCULATION DYNAMICS OF THE KEUM RIVER ESTYARY)

  • 정종율;이재학;안희수
    • 한국해양학회지
    • /
    • 제18권2호
    • /
    • pp.142-148
    • /
    • 1983
  • 錦江河口의 6個定點에서 大.小潮기에 Instantaneous profiling技法으로 同時 觀測한 鹽分値를 분석하여 鹽分境界層의 變化特性을 밝혔다. 錦江河口를 鹽分境界層의 變化特性으로 分流해 본 缺課 定常波型河口(standing wave type estuary)임이 再次確認(Chung, 1981)되었으며 變化의 크기는 上流로 갈수록 커짐도 아울러 밝혀 졌다. 또한 鹽分境界層의 變化는 大潮期 보다 小潮期에 큼도 밝혀 졌다. 鹽分境界層(S<10%)의 持續時間은 小潮期에 越等히 긴데, Shinri-Saugke斷面 보다 上流域에서는 6時間以上 持續되고 Sochgot-Kupo斷面 사이에서는 0-3時間童 顔 持續됨이 밝혀 졌다. 따라서 錦江河口에서의 堆積作用은 持續時間의 分布特性에 따른 區域別의 Flocculation作用의 强弱에 의해 支配되고 있음도 아울러 밝혀 졌다.

  • PDF

THE LUMINOSITY FUNCTION AND INITIAL MASS FUNCTION FOR THE PLEIADES CLUSTER

  • LEE SEE WOO;SUNG HWANKYUNG
    • 천문학회지
    • /
    • 제28권1호
    • /
    • pp.45-59
    • /
    • 1995
  • In the best observed Pleiades cluster, the luminosity function(LF) and mass function(MF) for main sequence(MS) stars extended to $Mv{\approx}15.5(V{\approx}21)$ are very similar to the initial luminosity function(ILF) and initial mass function(IMF) for field stars in the solar neighborhood showing a bump at log $m{\simeq}-0.05$ and a dip at log $m{\simeq}-0.12$. This dip is equivalent to the Wielen dip appearing in the LF for the field stars. The occurence of these bump and dip is independent of adopted mass-luminosity relation(MLR) . and their characteristics could be explained by a time-dependent bimodal IMF. The model with this IMF gives a total cluster mass of $\~700M_\bigodot,\;\~25$ brown dwarfs and $\~3$ white dwarfs if the upper mass limit of progenitor of white dwarf is greater than $4.5M_\bigodot$. The cluster age on the basis of LF for brightest stars is given by $\~8\times10^7yr$ and all stars in the cluster lie along the single age sequence in the C-M diagram without showing a large dispersion from the sequence.

  • PDF

변형된 원형 버섯 구조의 0차 공진을 이용한 메타 재질 대역 통과 여파기의 설계 (Design of a Metamaterial Bandpass Filter Using ZOR of the Modified Circular Mushroom Structure)

  • 장건호;강승택
    • 한국전자파학회논문지
    • /
    • 제21권8호
    • /
    • pp.893-899
    • /
    • 2010
  • 본 논문에서는 변형된 원형 버섯 구조의 메타 재질을 이용하여 새로운 대역 통과 여파기의 설계법을 제안한다. 0차 공진(Zeroth-Order Resonance: ZOR) 특성을 보이는 반원 형태의 버섯 구조 셀을 공진기로 이용하며, 각각의 이웃하는 0차 공진기 사이에 갭을 두어 용량성 결합을 유도한다. 제안된 메타 재질 대역 통과 여파기 설계법은 회로 해석 및 3차원 모의 실험과 측정을 통하여 해석 및 설계 목표와 비교 분석되어 그 타당성을 증명하였다. 0차 공진의 특수한 전계 분포 및 분산도를 통하여 메타 재질임을 증명하였으며, 대역 통과 여파기의 소형화에 대하여도 논의된다.

Investigation of Interplay between Driving Voltage of MZ Modulators and Bandwidth of Low-pass Filters in Duobinary Modulation Formats

  • Lee, Dong-Soo
    • 조명전기설비학회논문지
    • /
    • 제20권9호
    • /
    • pp.11-17
    • /
    • 2006
  • We have theoretically investigated the effects of the interplay between the driving voltage of Mach-Zehnder(MZ) modulators and the bandwidth of low-pass filters(LPF) in 10[Gb/s] duobinary modulation systems. For the change of driving voltage ratios(driving voltage/switching voltage), the transmission performance has been evaluated over 200[km] of single-mode fiber(SMF) systems. For driving voltage ratios with smaller than 100[%], the transmission performance has been maintained and greatly affected by the bandwidth of LPFs than the driving voltage. For driving voltage ratios with larger than 100[%], the transmission performance has been degraded and is not sensitive to the bandwidth of LPFs. To see the limitation of driving voltage, we have reduced the driving voltage ratio to 50[%]. Our results suggest that 10[Gb/s] duobinary signals with driving voltage ratio with smaller than 100[%] have been transmitted over 200[km] SMF within 2[dB] power penalty without dispersion compensation. For the driving voltage ratio with 50[%], we have verified that the transmission performance was maintained.

유도 결합형 Inverter와 Metamaterial을 이용한 넓은 저지 대역을 갖는 소형 GSM 대역 통과 여파기의 설계 (Design of the Miniaturaized UHF Bandpass Filter with the Wide Stopband Using the Inductive-Coupling Inverters and Metamaterials)

  • 주정호;강승택
    • 한국전자파학회논문지
    • /
    • 제19권2호
    • /
    • pp.95-101
    • /
    • 2008
  • 본 논문은, '불균형 조건의 메타 재질 구조'를 이용하여 GSM 대역에서 불요파 억제와 효과적인 소형화를 얻는 새로운 대역 통과 여파기 설계 기법을 제시한다. 기존의 반파장 및 025배 파장 공진기 기반의 여파기들과 비교하여, 본 CRLH 여파기는 처음으로 제안되는 유도성 결합 inverter에 의해 0차 공진기들이 결합되고, 이것을 사용함으로써 40$\sim$50 dB 하모닉 억제 효과와 80 %율의 소형화 얻는데 위한 우수한 성능을 보여준다. 이 기법의 타당성이 등가 회로와 분산도의 도출과 함께 성능 예측과 실험을 통해 검증된다.

백두산 천지 화산의 화산재 확산과 침적 모델링을 위한 개념적 설계 (Conceptual Design for the Dispersal and Deposition Modelling of Fallout Ash from Mt. Baekdu Volcano)

  • 윤성효
    • 암석학회지
    • /
    • 제22권4호
    • /
    • pp.273-289
    • /
    • 2013
  • 강하화산재는 농업과 기반시설에 다양한 형태의 피해를 발생시킬 수 있는 악명 높은 재해이며, 특별히 항공과 인체 건강에 가장 유해하다. 본 연구는 백두산 화산으로부터 폭발적 분화에 의하여 화산재가 확산되고 퇴적되는 것을 모델링하기 위한 목적으로 개념적인 모델 설계를 논의하고자 한다. 이는 모델의 가정과 경계 조건에 대한 토의와 더불어 개념적인 모델의 상세 다이어그램, 가능한 입력 파라미터, 단위, 방정식에 대한 논의를 포함한다. 모델에 포함되어 있는 두 가지 주요 과정은 화산재의 확산과 퇴적이며, 만약 모델이 설계되면 모델을 실행시켜 얻을 수 있는 것은 분연주에 포함된 미세 화산재의 총량, 화산재의 이동 거리, 지표면에 침적되는 화산재 두께 등이다.