• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.231-240
• /
• 2009

We explored collective behaviors of indicator species to elucidate the effect of the chemical stress. After the treatments of an insecticide, diazinon, at low concentrations (1.0 and 10.0 ${\mu}g/L$), spatial dispersion patterns of Daphnia magna were checked in a test chamber. The I-index was used to characterize the movement data before (0~1 h) and after (1~2 h) the treatments in laboratory conditions. The slopes of the frequency distribution of I-index in semi-log scale decreased significantly, and the test populations appeared to be more dispersed with a lower degree of aggregation after the treatments. The index was feasible in indicating decrease in the ability of the specimens to keep desirable distances with neighbor individuals under chemical stress and showed a possibility of monitoring presence of toxic chemicals in environment through group behavior measurement.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.216-222
• /
• 2017

Synthesized monocrystalline nanodiamond (nD) particles are heat-treated at various temperatures to produce highly structured diamond crystals. The heat-treated nDs show different weight loss ratios during thermogravimetric analysis. The crystallinities of the heat-treated nDs are analyzed using Raman spectroscopy. The average particle sizes of the heat-treated nDs are measured by a dynamic light scattering (DLS) system and direct imaging observation methods. Moreover, individual dispersion behaviors of the heat-treated nD particles are investigated based on ultrasonic dispersion methods. The average particle sizes of the dispersed nDs according to the two different measurement methods show very similar size distributions. Thus, it is possible to produce highly crystallized nD powder particles by a heat-treatment process, and the nD particles are relatively easy to disperse individually without any dispersant. The heat-treated nDs can lead to potential applications such as in nanocomposites, quantum dots, and biomedical materials.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.123-126
• /
• 1998

We derived an equation showing the temperature dependence of the zero-dispersion wavelength and measured the temperature dependence of the zero dispersion wavelength using four-wave mixing in dispersion shifted fibers in the range of $22^{\circ}C-59^{\circ}C$ From the experimental results, we found that the zero-dispersion wavelength is increased as the temperature around DSF increases and its temperature dependence is 0.032 nm/$^{\circ}C$. Also, the calculated behavior of FWM efficiency coincided with the experimental result.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.387-393
• /
• 2010

To improve concrete quality one of the most widely used chemical admixtures is polycarboxylate type superplasticizer. Unlike lignosulfonate and naphthalene-sulfonate, it has high dispersion property and excellent sustainable dispersion property for cement and concrete. Thus, polycarboxylate type superplasticizer has been widely used as a high-performance water reducing admixture together with silica fume in high-performance concrete and other applications for the dispersion of high-strength concrete over 100 MPa. However, even though there have been many studied on the dispersion of concrete by the structure of polycarboxylate type superplasticizer, there have a few studied that clarified the relationships between its rheological properties and microstructure properties in the early hydration behavior of ordinary portland cement. To investigate the correlations between the rheological properties and microstructure of cementitious materials with polycarboxylate type superplasticizer, this study experimented on the rheology, pore structure, heat evolution, and consistency in early hydration as well as on the compressive strength by early dispersion characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.392-393
• /
• 2006

Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the sysmatic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.28-35
• /
• 1996

Dispersion behavior was investigated as functions of species and arrount of addtives, binders, abrasives, lubricants, etc.. Dispersibilityand other various properties were affected by the fuctional groups of binders. Friction coefficient and surface roughness of tape were changed with lubricants, therefore duratility of magnetic tape was varied. As a result of above investigations, we concluded that dispersion behavior of particles was very sensitive for obtaining maximum properties of metal particle tape.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.215-219
• /
• 2005

Liquefied petroleum gas (LPG) has been used as motor fuel due to its low emissions and low cost. A liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray injecting from single hole injector. Two different test conditions are given, which are a fully developed spray case with various injection pressures and a developing spray case with ambient pressure variation. The LPG spray photographs are compared with the sprays of gasoline and diesel fuel at the same conditions, and the spray angles and penetration lengths are also compared, and then the spray behavior is analyzed. The LPG spray photos show that the dispersion characteristic depends very sensitively on the ambient pressure soon after injection. The spray angle is very wide in a low ambient pressure condition until the saturated pressure, but the angle is quickly reduced at the condition over the pressure. However, the down stream of the LPG spray shows much wider dispersion and less penetration than those of gasoline and diesel sprays regardless ambient pressure condition.

• Carbon letters
• /
• v.12 no.4
• /
• pp.194-206
• /
• 2011

Carbon nanomaterials in organic photovoltaic (OPV) cells have attracted a great deal of interest for the development of high-efficiency, flexible, and low-cost solar cells. Due to the complicated structure of OPV devices, the electrical properties and dispersion behavior of the carbon nanomaterials should be controlled carefully in order for them to be used as materials in OPV devices. In this paper, a fundamental theory of the electrical properties and dispersion behavior of carbon nanomaterials is reviewed. Based on this review, a state-of-the-art OPV device composed of carbon nanomaterials, along with issues related to such devices, are discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.195-201
• /
• 2019

Long caisson breakwaters can improve the structural safety of a caisson due to the wave dispersion effect which reduces the average wave force acting on one caisson. However, in order to make long caissons, there are many manufacturing and construction limitations. Recently, interlocking caisson systems, which are to form a long caisson by interlocking individual caissons with adjacent caissons, have been much attention. In the present study, a interlocking caisson system with shear-keys was proposed and the wave dispersion effect according to the shear-key was evaluated analytically. As a result, (1) Because of the asymmetric shape of the interlocking caisson, the structure behavior and the wave dispersion effect of one are also asymmetric. (2) The wave dispersion effect is more influenced by the distribution and characteristics of wave acting on each caisson rather than the shape of the shear-key such as shear angle, height, shear length ratio. (3) The interlocking caisson breakwater is almost the same behavior and wave dispersion effect as a fully integrated breakwater.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.389-393
• /
• 2002