• 한국자기학회지
• /
• 제24권2호
• /
• pp.46-50
• /
• 2014

Sol-gel법을 이용하여 $Fe_3O_4$과 $M_{0.2}Fe_{2.8}O_4$(M =Mn, Ni, Cu) 박막 시료을 만들어 M 치환에 따른 $Fe_3O_4$의 결정구조적 특성 및 양이온 분포를 X-ray diffraction(XRD)과 conversion electron M$\ddot{o}$ssbauer(CEMS) 분광법을 이용하여 조사하였다. CEMS 분광법을 이용하여 Fe 이온의 전하상태와 거동과 초미세 자기적 특성을 분석하였다. $M_{0.2}Fe_{2.8}O_4$(M =Mn, Ni, Cu) 시료들은 $Fe_3O_4$에서와 같이 입방정 스피넬 구조를 나타내었으며, Ni 이온 치환된 시료에서는 격자상수 값이 $Fe_3O_4$에서의 값과 비교하여 감소하였고, Mn 및 Cu 이온 치환된 시료에서는 증가하였다. CEMS 분석 결과 $Mn^{2+}$ 및 $Ni^{2+}$ 이온들은 주로 팔면체 자리를 치환하는 것으로 나타났으며, $Cu^{2+}$ 이온들은 팔면체, 사면체 자리를 모두 치환하는 것으로 나타났다. 부스펙트럼들의 세기비 $A_B/A_A$는 계산값과 측정값에 다소 차이가 있었으며, 이것은 M 치환이 A와 B자리의 Debye 온도에 영향을 주는 것으로 해석된다. B-자리 부스펙트럼의 비교적 큰 선폭값은 M 이온 치환에 기인한 B-자리의 M 이온분포가 초미세자기장에 미치는 분포효과로 나타났다.

• IUGG한국위원회:학술대회논문집
• /
• IUGG한국위원회 2003년도 정기총회 및 학술발표회
• /
• pp.20-20
• /
• 2003

In the summers of 1997 and 1998 and in February of 2000 we made 570 measurements of the ambient geomagnetic field 120 cm above the pavement surface of State Route 130, south of Pahoa, the island of Hawaii using a three-component fluxgate magnetometer. We measured at every 15.2 m (50 feet) interval covering a distance of 6, 310 m (20, 704 ft) where both historic and pre-historic highly magnetic basalt flows underlie. We also collected 197 core samples from eight road cuts, 489 specimens of which were subject to AF demagnetizations at 5 - 10 mT level up to a maximum field of 60 mT. We observed significant inclination anomalies ranging from a minimum of $31^{\circ}$ to a maximum $40^{\circ}$ where a uniform inclination value of $36.7^{\circ}$ (International Geomagnetic Reference Field, IGRF) was expected. Since the mean of the observed inclinations is approximately $35^{\circ}$ we assume that the study area is slightly affected by the magnetic terrain effect to a systematically shallower inclinations for being located in the regionally sloping surface of the southern side of the island (Baag, et al., 1995). We observed inclination anomalies showing wider (spacial) wavelength (160 - 600 m) and higher amplitudes in the historic lava flows area than in the northern pre-historic flows. Our observations imply that preexisting inclination anomalies such as those that we observed would have been interpreted as paleosecular variation (PSV). These inclination anomalies can best be attributed to concealed underground highly magnetic dikes, channel type lava flows, on-and-off hydrothermal activities through fissure-like openings, etc. Both the within- and between-site dispersions of natural remanent magnetization (NRM) are largest (up to ${\pm}7^{\circ}$) above the flows of 1955, while the area of pre-historic flows in the northern part of the study area exhibit the smallest dispersion. Nevertheless, mean inclinations of each historic flow of 1955 and 1790 are almost identical to that of the corresponding present field, whereas mean of NRM (after AF demagnetization) inclinations for each of the four pre-historic lava flow units is twelve to thirteen degrees lower than the present field inclination. We observed three cases of very large inclination variations from within a single flow, the best fitting curves of which are linear, second and third order polynomials each from within a single flow, whereas no present field variations are observed. This phenomena can be attributed to the notion that local magnetic anomalies on the surface of an active volcano are not permanent, but are transient. Therefore we believe that local magnetic anomalies of an active volcano may be constantly modified due to on going subsurface injections and circulations of hot material and also due to wide spacial and temporal distribution of highly magnetic basaltic flows that will constantly modify the topography which will in turn modify the local ambient geomagnetic field (Baag, et al., 1995). Our observations bring into question the general reliability of PSV data inferred from volcanic rocks, because on-going various geologic and geophysical activities associated with active volcano would continuously deflect and modify the ambient geomagnetic field.

• 복식문화연구
• /
• 제18권4호
• /
• pp.670-686
• /
• 2010

This study aims at clarifying the action types of skin management which is base on age, marriage or not, family composition, school career, and income which are demographic variables centering around the lifestyle of middleaged and old age women. As for study method, this researcher executed literature study and questionnaire on adult women over 45 years old who dwell in Seoul and Kyounggi area. Survey period was Mar. 1, 2009 to Jun. 30. And, after distributing 1,000 copies of questionnaire, this researcher used effective 869 copies of questionnaire for analysis out of collected questionnaire, 895 copies. As for analysis method, this researcher executed DUNCAN test with factor analysis, reliability analysis, manin component analysis, K-average, multitude analysis, dispersion analysis and post verification by using SPSS 12.0 program. As for demographic feature for middle aged and old age women, 50~59 years old women were most by age as 302 persons(33.7%). It is emerging that spouse existence is very high as 674 persons(75.3%) in the answer for marriage or not, couple family to live with unmarried children is very high as 483 persons(54.0%) in the answer for family composition, leaving high school in mid-course or gradation of high school are very high as 356 persons(39.8%) in the answer for school career, income from 3 million Won under 4 million won is very high as 260 persons(29.1%) in the answer for monthly income of family members, and women to use under 50 thousand won is very high as 510 persons(57.0%) in the monthly average expense to be used for skin management. In this study, this researcher extracted total 5 factors (economic saving, displaying consumption, confidence inclination, centering around family, and leisure application) by executing factor analysis with 12 question items of lifestyle so as to grasp factor structure of lifestyle of middleaged and old age people, and whole explanatory variable quantity was 70.9%. This researcher named as economic saving type, diplaying consumption style, and type centering around leisure and family, after making multitude analysis about 5 factors analyzed by measuring lifestyle feature. As the result of structure analysis of question items of skin management(pursuit of skin management, life of skin management, and inclination of skin management), this researcher extracted total 3 factors, and whole explanatory variable quantity was 71.30%. Thus, it emerged that there is significant difference among groups.

• 폴리머
• /
• 제37권4호
• /
• pp.494-499
• /
• 2013

이축압출기(twin screw extruder)를 이용하여 용융상태에서 furfuryl sulphide를 분지제로 개질 폴리프로필렌(modified polypropylene, m-PP)을 제조하고, 층상 실리케이트와 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)와의 m-PP/나노필러 복합체를 제조하였다. m-PP의 화학구조와 열적 특성은 적외선분광기(FTIR), 시차주사열용량분석기(DSC)를 이용하여 관찰하였다. m-PP의 화학구조는 3100 $cm^{-1}$에서 나타나는 분지제의 =C-H 신축진동피크를 이용하여 확인하였고, 용융온도는 큰 변화를 보이지 않았지만 결정화온도는 $10-20^{\circ}C$ 가량 증가하였다. m-PP/나노필러 복합체의 유변학적 특성과 분산성 및 발포거동은 동적유변측정기, X-선 회절분석기(XRD), 주사/투과전자현미경(SEM/TEM)을 이용하여 관찰하였다. m-PP/나노필러 복합체의 낮은 주파수 영역에서의 복합점도와 용융탄성이 증가하였으며, 전단담화(shear thinning) 효과 또한 증가하였다. 순수 PP와 비교할 때 m-PP와 m-PP/나노필러 복합체의 발포 거동 개선효과가 우수한 것을 확인하였다.

• 한국광학회지
• /
• 제10권3호
• /
• pp.181-187
• /
• 1999

대표적인 이차 비선형 광학 물질인 곁가지형 NPP(N-(4-nitrophenyI)-(L)-prolinol) 고분자 박막을 스핀코팅으로 제작하였다. 위상변조방식의 분광타원해석기를 사용하여 코로나 특성배향법으로 온도와 전기장을 변화시켜가며 실시간으로 타원해석 스펙트럼을 측정하였다. 광투과영역에서의 타원해석상수를 모델링분석하여 박막의 두께를 구하였고, 광합수영역에서는 타원해석상수의 역방계산을 통해 굴절율과 소광계수를 구하였다. 분광광도계를 사용하여 배향 전후 각각의 상태에 따른 광 투과율 스펙트럼을 측정한 후 이를 되먹임 관계식에 적용하여 구한 소광계수가 분광타원해석법으로 결정한 결과와 일치함을 확인하였다. 또한 두께가 비교적 얇은 시료의 타원해석 스펙트럼을 코로나배향 전후에 걸쳐 분석한 후 시료 면에 수직한 수직 복소굴절율과 시료 면에 평행한 수평 복소굴절율을 각각 결정하였다. 이 수직과 복소굴절율을 기준데이터로 사용하고 모델링 과정을 적용하여 배향의 각 단계별로 유효 수직조성비를 결정하여 두꺼운 고분자 박막의 배향된 정도를 정량화하는 분석모델을 제시하였다.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.423-430
• /
• 2015

$Cu/ZnO/Al_2O_3$ catalysts for water gas shift (WGS) reaction were synthesized by co-precipitation method with the fixed molar ratio of Cu/Zn/Al precursors as 45/45/10. Copper and zinc precursor were added into sodium carbonate solution for precipitation and aged for 24h. During the aging period, aluminum precursor was added into the aging solution with different time gap from the precipitation starting point: 6h, 12h, and 18h. The resulting catalysts were characterized with SEM, XRD, BET surface measurement, $N_2O$ chemisorption, TPR, and $NH_3$-TPD analysis. The catalytic activity tests were carried out at a GHSV of $27,986h^{-1}$ and a temperature range of 200 to $400^{\circ}C$. The catalyst morphology and crystalline structures were not affected by aluminum precursor addition time. The Cu dispersion degree, surface area, and pore diameter depended on the aging time of Cu-Zn precipitate without the presence of $Al_2O_3$ precursor. Also, the interaction between the active substance and $Al_2O_3$ became more stronger as aging duration, with Al precursor presented in the solution, increased. Therefore, it was confirmed that aluminum precursor addition time affected the catalytic characteristics and their catalytic activities.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1178-1185
• /
• 2004

In the atmosphere of $N_2$ gas, BaZ $r_{0.08}$ $Ti_{0.92}$ $O_3$ polycrystal was grown by floating zone technique using BaZ $r_{0.08}$ $Ti_{0.92}$ $O_3$ ceramics as a feed and SrTi $O_3$(1l0) single cystal as a seed. The dielectric constant and loss at 10 kHz, 100 kHz, and 1 MHz for the as-grown sample were measured as a function of temperature in the temperature range between -10$0^{\circ}C$ and 150 $^{\circ}C$ to find a dielectric peak with frequency dispersion at Curie point. The hysteresis loop showed that the grown sample had very small polarization which was 0-0.01 $\mu$C/$\textrm{cm}^2$ for the applied dc-electric fields from -7 kV/cm to +7 kV/cm. However, the normal hysteresis loop was appeared after oxygen annealing. The electric-field dependence of the dielectric constant for both the as-grown and the post-annealed samples was studied by measuring the dielectric constants as a function of the biased-electric fields and their tunability was figured out from it at room temperature(27 $^{\circ}C$) and cryotemperature( -73$^{\circ}C$). Tunability for the as-grown sample was 51 % and the figure of merit 20.4 at 10kHz with the biased electric-field of 12 kV/cm. The tunability for the grown sample may be increased up to 80 % if the electric field of 25 kV/cm is applied. Tunability for the post-annealed sample was 41 % and the figure of merit 10.3 at 10 kHz with the biased electric-field of 12 kV /cm. Post-annealing improved the crystallinity of the as-grown sample but decreased its tunability.ability.

• Ecology and Resilient Infrastructure
• /
• 제2권3호
• /
• pp.216-223
• /
• 2015

본 연구는 영주댐 건설사업 영향에 따른 멸종위기야생생물 1급 어류 흰수마자의 보전을 위하여 수몰예정지 내 흰수마자를 서식적합지로 이주시키고, 댐에 의한 내성천 상하류 단절 및 유전적 폐쇄에 대비하여 인공종묘생산 및 복원을 통해 내성천에 치어를 방류하여 그 결과를 관찰하였다. 영주댐 수몰예정지 내 흰수마자는 8회 이상 포획 시도에도 불구하고 서식이 확인되지 않아 이주가능지로 이주는 이루어지지 않았다. 내성천에서 포획한 친어 40개체를 통해 인공종묘생산한 치어 5,000개체는 친어의 유전 다양성을 물려받은 것으로 분석되었으며, 사전에 물리적, 생물학적 환경조건 분석을 통하여 자연 서식지와 유사한 최적방류지를 선정하여 인공종묘생산 치어를 방류하였다. 초기에는 방류지점을 중심으로 미소분산이 이루어졌으나, 시간흐름에 따라 확산이 진행되면서 재포획 개체수가 감소하였다. 포획된 방류 개체들은 내성천 자연생태환경에 적응하여 서식하고 있으며, 복부 팽만도가 높고 총배설공으로 배설물이 확인되는 점으로 보아 자연 먹이 섭식이 정상적으로 이루어지고 있는 것으로 나타났다. 따라서 인공종묘생산에 의한 영주댐 상하류 내성천 흰수마자 유전적 동질성 확보와 복원 개체군의 증강에 일차적 성공이 이루어지고 있는 것으로 파악되었으며 향후 장기적인 모니터링을 통한 지속적인 효과 분석이 필요할 것으로 전망되었다.

• 응용통계연구
• /
• 제28권2호
• /
• pp.343-351
• /
• 2015

본 논문에서는 SRC-Stat 통계패키지를 이용하여 변량효과를 적합하는 방법에 대해서 소개하고자 한다. 본 패키지를 통하여 단변량 평균 뿐만 아나리 산포 및 분산에도 변량효과를 고려하는 이중 다단계 일반화 선형모형을 적합할 수 있다. 고정효과 및 변량효과의 추정치는 다단계 우도 방법을 이용하고 있으며, 실제 자료 적합을 통해 패키지의 사용법에 대해서 설명하고자 한다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.99-104
• /
• 2013

Recently, various nanoparticles have been used for filler in polymer matrices. The particles of nano size are whether high or not cross-link density in polymer affects the thermal and mechanical properties of one. The properties change as a result of chemical reactions between the nanoparticles and the surface of the polymer. There are two models for nanocomposites: "repulsive interaction" and "attractive interaction" between the nanoparticles and matrix. In this study, the variation in the curing mechanism was examined when nano-size $TiO_2$ was dispersed into an epoxy (Bisphenol A, YD-128) with different curing agents. The results of this study showed that the exothermic temperature and Tg in the case of the nanoparticles used (Jeffamine) (D-180) at room temperature were reduced by an increase in the $TiO_2$ contents because of the "repulsive interaction" between the nanoparticles and the matrix. The tensile strengths were increased by increasing amounts of $TiO_2$ until 3 wt% because of a dispersion strengthening effect caused by the nanoparticles, because of the repulsive interaction. However, such tensile properties decreased at 5 wt% of $TiO_2$, because the $TiO_2$ was agglomerated in the epoxy. In contrast, in the case of the nanoparticles that used NMA and BDMA, the exothermic temperature and Tg tended to rise with increasing amounts of $TiO_2$ as a result of the "attractive interaction." This was because the same amounts of $TiO_2$ were well dispersed in the epoxy. The tensile strength decreased with an increase in the $TiO_2$ contents. In the general attractive interaction model, however, the cross-link density was higher, and tensile strength tended to increase. Therefore, for the nanoparticles that used NMA, it was difficult to conclude that the result was caused by the "attractive model."