• 대한교통학회지
• /
• 제17권1호
• /
• pp.131-139
• /
• 1999

신호 교차로의 지체도에 미치는 가장 큰 영향요소중의 하나는 신호연동인데 신호연동지체도 예측모형으로서 T7RANSTY-7F모형과 NETSIM모형이 가장 널리 사용되고 있다. 이는 컴퓨터 프로그래밍기법을 이용해야 하는 복잡함과 실행과정이 쉽지않다. 본 연구는 연동지체의 산정을 도로용량편람의 사용예처럼 간편하면서 시뮬레이션모형과 유사한 결과를 갖는 모형을 연구하기 위하여 이루어졌다. 연구의 범위는 차량군을 대상으로한 거시적모형이며 신호교차로 연동지체를 평가하는 해석적 모형이다. 그리고 정상류상태(v/c<1)를 대상으로 하면서 차량군지체만을 산정하는 모형이다. 본 연구방법은 차량군도착으로 형성되는 누적교통량·시간함수에 의한 지체도산정을 적분법으로서 두 개의 도착유형으로 구분하여 산출하였으며 본 연구결과로는 제안모형내에 차량군 연속진행의 도착패턴을 직접적으로 반영하였고 현실 특성에 부합된 차량군형태를 구성하였다. TRANSTY-7F모형과 유사한 결과를 도출하였으며 수계산으로도 적용할 수 있고 기존의 해석적 모형이 결여된 경우에 대한 지체도예측도 가능하였다.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.1-11
• /
• 2016

본 연구에서는 벽면으로부터 균일한 열 유속 조건에서 나노유체의 층류유동에 의한 대류 열전달 향상과 관련하여 유동관 내 벽면에서의 나노입자 거동의 영향에 대한 수치해석 및 실험 연구에 대해서 논한다. $SiO_2$ 나노유체의 동적 열전도도는 스테인리스 원형 관(길이 1 m 및 직경 1.75 mm)의 외면에 부착된 T형 열전대를 활용하여 측정하였다. 실험에 사용된 나노유체는 직경이 24 nm인 구형의 $SiO_2$ 나노 입자를 초순수에 분산시켜 제조하였다. 나노 유체의 향상된 열전도도(즉, 최대 7.9 %의 증가)는 기본유체(즉, 초순수)와 나노유체 간 유동에서 벽면 온도 변화를 측정하여 비교함으로써 확인하였다. 하지만, 수치해석 결과에서는 실험으로부터 발견된 경향이 발견되지 못했는데, 이는 수치해석 모델이 기본적으로 연속체역학 및 안정된 콜로이드 용액에 나노 입자를 포함하는 유동특성에 기반을 두기 때문으로 분석된다. 이에 따라, 열교환 표면에서 나노입자와 벽면 간 상호작용(예: 나노입자의 고립된 침전)에 의한 표면특성 변화와 같은 비연속체역학 기반의 효과를 확인하기 위하여, 나노유체의 흐름 직후 정제수를 활용한 추가실험을 수행하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제9권1호
• /
• pp.137-144
• /
• 2004

The diamondback moth, Plutella xylostella, is notorious because of its extensive potential and actual dispersal ability. Previously, the Korean populations of P. xylostella was extensively collected and analyzed for their genetic population structure using a portion of mitochondrial DNA (mtDNA). One of the postulated characteristics on population genetic structure of the species includes the presence of heterogeneous haplotypes, possibly possessed by some dispersed ones from neighboring countries. In this study, we sequenced ten P. xylostella collected from China (∼2,000 km away from the middle part of Korea) to know the genetic relationships of these to the Korean P. xylostella. Sequence analysis of the identical portion of COI gene resulted in five haplotypes with the sequence divergence ranging from 0.5% (two nucleotides) to 1.1 % (five nucleotides) among them and from 0.7% (three) to 2.5% (11) to the pre-existing 52 Korean haplotypes. Phylogenetic analysis showed that the Chinese P. xylostella were neither clearly separated from the Korean haplotypes nor clustered with one heterogeneous Korean haplotype. This result reinforces the significance of gene flow in this species and suggests to exclude the possibility that the heterogeneous Korean haplotypes may have emigrated from China, where our samples were obtained, although further extensive investigation is required.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.288-294
• /
• 2011

Simultaneous Ni and C codeposition by electrolysis was investigated with the aim of obtaining better corrosion resistivity and surface conductivity of a metallic bipolar plate for application in fuel cells and redox flow batteries. The carbon content in the Ni-C composite plate fell in a range of 9.2~26.2 at.% as the amount of carbon in the Ni Watt bath and the roughness of the composite were increased. The Ni-C composite with more than 21.6 at.% C content did not show uniformly dispersed carbon. It also displayed micro-sized defects such as cracks and crevices, which result in pitting or crevice corrosion. The corrosion resistance of the Ni-C composite in sulfuric acid is similar with that of pure Ni. Electrochemical test results such as passivation were not satisfactory; however, the Ni-C composite still displayed less than $10^{-4}$ $A/cm^2$ passivation current density. Passivation by an anodizing technique could yield better corrosion resistance in the Ni-C composite, approaching that of pure Ni plating. Surface resistivity of pure Ni after passivation was increased by about 8% compared to pure Ni. On the other hand, the surface resistivity of the Ni-C composite with 13 at.% C content was increased by only 1%. It can be confirmed that the metal plate electrodeposited Ni-C composite can be applied as a bipolar plate for fuel cells and redox flow batteries.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.199-207
• /
• 2011

After the development of printing technology since the 15th century and the rise of citizen consciousness in the 18th century, the library has taken a public concept. And after the 20th century, its role as a public library for the public was stressed, and as its spatial composition became miniaturized and specialized, its function changed from stacking and reading to various kinds including culture and service and is getting more complex beside the function of a library. Thereupon, this study aims to figure out the limitations of public libraries' opening years shown in advanced researches and understand the current status of spatial composition by complexation with the subjects of five public libraries opened after the end of December, 2006 in order to examine their tendencies of complexation and the characteristics of spatial composition by the complexation of public libraries. As a result, the present public libraries have at leaser more than two spaces with complex functions. According to the result of analysis on the types, locational relations between spaces showed the mixed type the most. In the types of building allocation, the building integrated type had a higher percentage than the separated type. About the types of entrance, the one common door type was fewer than the two separate door type. In the analysis on the types of the interior line of flow, the common type was similar to the dispersed type, and it is thought to be resulted from spatial composition rather than the preplanned line of flow.

• Journal of Microbiology and Biotechnology
• /
• 제20권4호
• /
• pp.844-851
• /
• 2010

Controlling the dissolved oxygen (DO) in the fed-batch culture of the medicinal mushroom Ganoderma lucidum led to a 2-fold increase of the maximum biomass productivity compared with uncontrolled DO conditions. By contrast, extracellular polysaccharide (EPS) production was two times higher under oxygen limitation (uncontrolled DO) than under increased oxygen availability (controlled DO). Morphologically, dispersed mycelium was predominant under controlled DO conditions, with highly branched hyphae, consistent with the enhanced culture growth noted under these conditions, whereas in the uncontrolled DO process mycelial clumps were the most common morphology throughout the culture. However, in both cultures, clamp connections were found. This is an exciting new finding, which widens the applicability of this basidiomycete in submerged fermentation. In rheological terms, broths demonstrated shear-thinning behavior with a yield stress under both DO conditions. The flow curves were best described by the Herschel-Bulkley model: flow index down to 0.6 and consistency coefficient up to 0.2 and 0.6 Pa $s^n$ in uncontrolled and controlled cultures DO, respectively. The pseudoplastic behavior was entirely due to the fungal biomass, and not to the presence of EPS (rheological analysis of the filtered broth showed Newtonian behavior). It is clear from this study that dissolved oxygen tension is a critical process parameter that distinctly influences G. lucidum morphology and rheology, affecting the overall performance of the process. This study contributes to an improved understanding of the process physiology of submerged fermentation of G. lucidum.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4754-4773
• /
• 2018

In sensor medium access control (SMAC) protocol, sensor nodes can only access the channel in the scheduling and listening period. However, this fixed working method may generate data latency and high conflict. To solve those problems, scheduling duty in the original SMAC protocol is divided into multiple small scheduling duties (micro duty MD). By applying different micro-dispersed contention channel, sensor nodes can reduce the collision probability of the data and thereby save energy. Based on the given micro-duty, this paper presents an adaptive duty cycle (DC) and back-off algorithm, aiming at detecting the fixed duty cycle in SMAC protocol. According to the given buffer queue length, sensor nodes dynamically change the duty cycle. In the context of low duty cycle and low flow, fair binary exponential back-off (F-BEB) algorithm is applied to reduce data latency. In the context of high duty cycle and high flow, capture avoidance binary exponential back-off (CA-BEB) algorithm is used to further reduce the conflict probability for saving energy consumption. Based on the above two contexts, we propose an improved SMAC protocol, micro duty adaptive SMAC protocol (MDA-SMAC). Comparing the performance between MDA-SMAC protocol and SMAC protocol on the NS-2 simulation platform, the results show that, MDA-SMAC protocol performs better in terms of energy consumption, latency and effective throughput than SMAC protocol, especially in the condition of more crowded network traffic and more sensor nodes.

• Korea-Australia Rheology Journal
• /
• 제17권3호
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.185-198
• /
• 1995

This is an experimental study conducted to visualize the nucleate boiling phenomena and flow regimes occurring inside the liquid pool in a closed two-phase thermosyphon. To meet this purpose, an annular-type thermosyphon was designed and manufactured using a glass tube and a stainless steel tube, being assembled axisymmetrically. The heat to be supplied to the working fluid is generated within a very thin layer of stainless steel tube wall by applying a high frequency electromagnetic field through the induction coil, axisymmetrically set around the evaporator zone. Some important results were as follows ; 1) Considering the structural complexity of the tested thermosyphon, it showed good performance for the range of heat flux 2＜ q" ＜25kW/$m^2$ and saturation vapor pressure, 0.1＜Pv＜1.1bar 2) different type of nucleating boiling regimes were observed as described below, -Pulse boiling regime : Flow pattern changed cyclically with time during 1 cycle of pulse boiling process. The onset of Nucleation was followed by expulsive growing of vapor bubble, resulting in the so called blow-up phenomenon, massive expulsion of large amount of liquid around the bubble. -Transient : Some spherical vapor bobbles were observed growing out from 2~3 nucleating sites, that was dispersed at the lower part of the heated tube wall in the liquid pool. But the rest upper region above the nucleating sites were filled with churns or bubbles of vapor. -Continuous nucleate boiling regime : The whole zone of evaporator was filled with lots of spherical vapor bubbles, and the bubbles showed tendency to decrease in diameter as the heat flux increased.ased.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.45-52
• /
• 1995

수평 유로를 통과하는 이상류 내에서 기체상의 난류 응력이 이상류 시스템의 전반적 거동 특성에 미치는 영향을 연구하였다. 이를 위하여 이미 오랜 연구 노력으로 입증된 평균 이상류 거동 방정식을 채택하여 수평관에서 흔히 발생하는 성층류형 이상류에 대하여 적절히 모델하였다. 모델의 고유치를 계산하고 그의 특성 방정식으로부터 이상류 시스템의 well-posedness 및 다른 이상 유동 영역으로의 천이 경계를 새로이 결정하였다. 그 결과로 지금까지 무시해 왔던 기체상의 난류웅력이 이상류 시스템의 안정성에 커다란 영향을 주는 것이 발견되었다. 본 연구에서는 그 영향이 정량화 되었으며 그외의 효과도 정량화 하는 방법을 정립하였다. 본 연구는 원자로 시스템 해석 코드에 쓰이고 있는 열수력 모델 중 불확실성이 많은 모델인 수평관에서의 이상유동 영역 천이 조건식을 개선함으써 시스템 해석 결과의 신뢰도를 높이는 데 이용할 수 있다.