• 한국자기학회지
• /
• 제9권2호
• /
• pp.121-126
• /
• 1999

친수성 철계 자성유체의 제조와 이 자성유체를 Nd-영구자석과 병용하여 기름 밀봉 장치의 개발을 목적으로 실험검토한 결과 다음과 같은 결론을 얻었다. 1)평균 입경 100$\AA$, 자화값 125.5emu/g, 대기중 15$0^{\circ}C$까지 산화 변질성이 없는 실리카 피착 철 초미립자의 표면에 오레인산 이온, D.B.S. 이온 및 T.M.A. 이온을 흡착한 후 ethylene glycol 용액중에 분산시켜 친수성 철 분말 자성유체를 제조할 수 있었다. 2)이상의 친수성 철 분말 자성유체[70%(g/ )Fe]를 영구자석(3200 Gauss)과 병용하여 기름 밀봉 장치에 응용한 결과 영구자석의 설치 개수를 영구자석 6단 그리고 구동축과 밀봉 장치 사이 간격 0.2mm의 조건에서 압력 7400g/$\textrm{cm}^2$까지 견딜 수 있는 우수한 내압 특성을 얻었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.140-145
• /
• 2013

The development of high performance fabrics have advanced body armor technology and improved ballistic performance while maintaining flexibility. Utilization of the shear thickening phenomenon exhibited by Shear Thickening Fluids (STF) has allowed further enhancement without hindering flexibility of the fabric through a process of impregnation. The effect of STF impregnation on the ballistic performance of fabrics has been studied for impact velocities below 700 m/s. Studies of STF-impregnated fabrics for high velocity impacts, which would provide a transition to significantly higher velocity ranges, are lacking. This study aims to investigate the effect of STF impregnation on the high velocity impact characteristics of Kevlar fabric by effectively dispersing silica nanoparticles in a suspension, impregnating Kevlar fabrics, and performing high velocity impact experiments with projectile velocities in the range of 1 km/s to compare the post impact characteristics between neat Kevlar and impregnated Kevlar fabrics. 100 nm diameter silica nanoparticles were dispersed using a homogenizer and sonicator in a solution of polyethylene glycol (PEG) and diluted with methanol for effective impregnation to Kevlar fabric, and the methanol was evaporated in a heat oven. High velocity impact of STF-impregnated Kevlar fabric revealed differences in the post impact rear formation compared to neat Kevlar.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.210-215
• /
• 2002

MR(Magnetorheogical) fluid composed of fine iron powders dispersed in silicon oil is utilized to many smart structures and devices because of its significant rheological property change by the application of an external magnetic field. When we deal with the shock wave attenuation of warship structures, we should be able to characterize the high frequency behavior of MR fluids. So far, however, many efforts have been focused on the material characterization of MR fluids at low frequencies below 100Hz. In this paper, the MR fluid property characterization at high frequency region is performed. An experimental setup based on wave transmission technique is made and the storage modulus as well as the loss modulus of MR fluids are found from the measured data of speed sound and attenuation. Details of the experiment are addressed and the obtained storage and loss moduli are addressed at $50kHz{\sim}100kHz$.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.268-276
• /
• 2001

In order to improve the efficiency of a direct contact heat exchanger for a solar thermal energy system, the working fluid should be dispersed into small and uniform droplets, and stay within a heat exchanger for a long time. Therefore, installation of meshes in a direct contact heat exchanger is suggested in the present study, and the performance of the direct contact heat exchanger with several layers of meshes is experimentally investigated. Diethyl phthalate is used as the working fluid, and the performance of the heat exchanger is tested for several different operating conditions and compared to that of the heat exchanger without meshes. The results of this investigation show that meshes make droplets uniform and small when the flow rate is low. The relationship between the Peclet number and the Nusselt number becomes linear if it is steady. And, the Nusselt number for the direct contact heat exchanger with meshes becomes greater than that without meshes as the Peclet number increases.

• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.78-85
• /
• 2009

A combined theoretical and numerical study is conducted to design a slit nozzle for large-area liquid coating. The objectives are to guarantee the uniformity in the injected flow and to provide the capability of explicit control of flow rate. The woking fluid is a dilute aqueous solution containing single-walled carbon nanotubes and its low viscosity and the presence of dispersed materials pose technical hurdles. A theoretical analysis leads to a guideline for the geometric design of a slit nozzle. The CFD-based numerical experiment is employed as a verification tool. A new flow passage unit, connected to the nozzle chamber, is proposed to permit the control of flow rate by using the commodity pressurizer. The numerical results confirm the feasibility of this idea. The optimal geometry of internal structure of the nozzle has been searched for numerically and the related issues are discussed.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.242-250
• /
• 2010

For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.

• Journal of Pharmaceutical Investigation
• /
• 제19권3호
• /
• pp.155-161
• /
• 1989

Coprecipitates of chlorpropamide (CPA)-sodium deoxycholate (DC-Na) were prepared at various ratios of CPA to the DC-Na. The X-ray diffraction and DSC measurements indicated that CPA in 1:1 and 1:3 w/w CPA-DC-Na coprecipitates did not exist in amorphous form, but the others were amorphous. The dissolution rate of CPA from the CPA-DC-Na coprecipitates increased in distilled water and KP V 2nd disintegration test fluid (pH 6.8), but decreased extremely in KP V 1st disintegration test fluid (pH 1.2). The dissolution rates of CPA-DC-Na coprecipitates were compared with those of CPA alone and CPA-DC-Na physical mixtures. Especially, it was found that the dissolution rate of CPA markedly increased in the case of 1:5 CPA-DC-Na coprecipitate. The concentration of CPA dissolved from CPA-DC-Na coprecipitate reached a plateau within 5-10 min, and thereafter gradually decreased, indicating that CPA released from the coprecipitate was recrystallized.

• 설비공학논문집
• /
• 제18권5호
• /
• pp.384-392
• /
• 2006

Reported are the heat transfer characteristics of a two-phase loop thermosyphon (TLT) with nanofluids consisted of nano-size silver particles and distilled water as the working fluid. The nanofluids used in the present study are dispersed solutions with various amount of silver nanoparticle in distilled water. It is seen from the present study that the heat transfer performance of the test TLT with nanofluids increased as much as about 2 times higher than that of a TLT with pure water as the working fluid based on same heat flux. The study also showed that there was no deterioration of the TLT performance with time, up to a period of 8 days of continuous operation which implies that there was no coagulation of nanoparticles within the working nanofluid during the operation of the test TLT.

• 지질학회지
• /
• 제54권5호
• /
• pp.477-488
• /
• 2018

유성이토는 현생 염하구 환경에서 흔히 발달하지만, 고기의 퇴적층에서 보고되고 퇴적학적으로 연구된 예는 드물다. 캐나다 앨버타주의 전기 백악기 맥머레이층에서 시추한 염하구 하도 퇴적층 내의 여러 이암층들은 고농도부유점토류에 의한 퇴적특징을 보인다. 이러한 이암층들을 현미경으로 자세히 관찰하여 3개의 미퇴적상(microfacies, <1~25 mm 두께)으로 구분하였다. 미퇴적상 1은 무구조의 이암(structureless mudstone)으로 주로 점토 입자로 구성되고 무질서하게 분포하는 조립질 입자(조립질 실트~세립질 모래)들을 포함한다. 조립질 입자들을 지지할 수 있는 양력을 지닌 점착성의 이토류, 즉 유성이토가 정지하여 미퇴적상 1이 퇴적된 것으로 해석된다(quasi-laminar plug flow). 미퇴적상 2는 실트엽층을 포함하는 이암(silt-streaked mudstone)으로 산재한 조립질 입자를 포함하는 이암으로 구성되며, 불연속적이고 매우 얇은 실트엽층을 포함한다. 미퇴적상 1과 유사한 조직을 보이므로, 미퇴적상 2도 점착성의 유성이토에 의해 퇴적된 것으로 해석된다. 하지만 불연속적인 실트엽층은 plug 아래에 간헐적이고 약한 난류운동이 있었음을 제시한다(upper transitional plug flow). 미퇴적상 3은 이질 엽층리의 이암(heterolithic laminated mudstone)으로 실트엽층과 점토엽층의 교호로 구성되며, 평행엽층리 또는 저각도 사엽층리를 보이고 간혹 낮은 기복의 연흔 형태를 보인다. 이질 엽층리는 점착성 plug 아래의 난류층에서 입자크기에 따른 분급작용이 일어났음을 지시하며, lower transitional plug flow 아래에서 발달하는 낮은 층면구조에 의해 형성되었을 것으로 해석된다. 이 미퇴적상들은 유속과 부유이토농도에 따라 달라지는 유성이토의 여러 가지 상을 나타낸다고 볼 수 있다. 다른 지역에서 유성이토층을 인지하고 이암의 퇴적작용을 보다 잘 이해하는데 본 연구의 결과가 중요한 지식을 제공하리라 생각된다.

• 유변학
• /
• 제11권1호
• /
• pp.1-8
• /
• 1999

본 논문은 높은 압력차의 유동모드 하에서의 정상전단거동을 고찰하였다. ER유체 조성에 사용된 비전도성 용매는 10cS의 점도를 갖는 트랜스포머 오일이 사용되었으며, 전도성 입자의 중량비를 20 wt%와 30 wt%로 조절하여 입자 중량비에 대한 영향을 고찰하였다. 두 가지로 조성된 수계 ER유체를 ERF 1과 ERF 2로 칭하였으며, 성능 비교를 위하여 외국의 우수하다고 알려진 비수계 ER유체인 ERF 3를 사용한 실험도 실시하였다. 높은 압력차의 유동모드를 발생시키기 위해, 양방향 유압 실린더를 이용하여 고압의 질소 가스로 작동되는 실험 장치를 자체 제작하였다. 전극 앞에 장착된 압력 센서를 통해 전극 양단의 압력차를 구하고, 실린더 로드에 부착된 변위센서로부터 측정한 피스톤 속도를 유량 계산의 기초 자료로 사용하였다. 유동모드에 대한 유체역학적 해석을 통해 유도된 수식을 인용했으며, 위의 기초 자료와 수식을 이용하여 유동모드형 응용 장치에 적용하기 위한 전단변형률에 대한 전단응력의 결과를 도출하였다.