• 한국염색가공학회지
• /
• 제19권6호
• /
• pp.21-27
• /
• 2007

The factors which affect the absorption and diffusion of disperse dye in print paste for polyester film were investigated using film roll method. When Emvatex print paste of different disperse dye concentrations were fixed by high temperature steaming(HTS) for 2 hr at $190^{\circ}C$, the dye uptake and diffusion distance of 50g/kg dye concentration for PET film were very low, but those of 100$\sim$300g/kg were increased with increasing dye concentration. It was found that sodium alginate(5%) was more effective for the absorption and diffusion of disperse dye to PET film than CMC(3%) and Emvatex(18%), and Emvatex showed comparatively low absorption in three thickeners used. The dye uptake and diffusion distance of disperse dye in sodium alginate paste for PET film were increased with increasing paste thickness to $160\sim180{\mu}m$, but were decreased at $200\sim220{\mu}m$ in both fixations of baking and HTS for 2 hr at $190^{\circ}C$, and were far more largely increased by fixation of HTS than baking because steam was very important for fixation. Also it was confirmed that dye uptake was slightly increased as steam supply pressure was raised from 1 $kg/cm^2$ to 2 $kg/cm^2$, andthe dye uptake and diffusion distance of disperse dye were outstandingly increased with raising fixing temperature from $170^{\circ}C$ to $190^{\circ}C$ and fixing time from 0.5 hr to 3 hr in the fixation of HTS.

• 감성과학
• /
• 제19권4호
• /
• pp.3-12
• /
• 2016

본 연구의 목적은 트리아세테이트와 흡한속건성 PET 합연사로 구성된 복합직물의 염착량 증진 및 동일색상 염색(union dyeing)을 위한 최적 혼합염색 조건을 찾는 것이다. 이를 위하여 E-type 분산염료(C.I. Disperse red 50)와 S-type 분산염료(C.I. Disperse red 92)를 혼합하여 1욕 혼합염색으로 염색온도, 염색시간, 염료의 혼합비율에 따른 염색직물의 흡진율, 염착율, 색상 및 색차를 측정하였다. 혼합염색의 염착평형은 $100^{\circ}C$에서 일어났으나 염색된 직물의 K/S 값과 겉보기 색상을 비교해보았을 때 트리아세테이트와 흡한속건성 PET의 색이 동일한 색으로 발현되는 온도는 $120^{\circ}C$임을 확인하였다. 염색 시간 증가에 따른 혼합염료 흡진율과 염착량의 변화는 크게 나타나지 않았으나 염색시간이 길수록 그리고 혼합염료를 사용할 경우 균일한 색상을 얻을 수 있었다. E-type에 S-type염료의 혼합비율을 적절히 조절하여 혼합염색 하면 단독염색 보다 E-type 염료의 색상과 차이 없이 염착량을 증대시킬 수 있었다.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.40-50
• /
• 2002

In order to remove the pollutants effectively in the dye wastewater by chemical precipitation process, coagulation arid flocculation test were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(B79), and we could get the best result lot the removal of disperse dye(B56) in the aspects of TOC removal efficiency and sludge field. When the Ferrous sulfate dosage was $800mg/\ell$, the sludge settling velocity was very fast>, and the color was effectively removed in the disperse dye(B79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge field was decreased in comparison with the Ferrous sulfate or the Ferric sulfate was used in the disperse dye(B56) solution. The general color removal effect for the disperse dye(B56 and B79) solutions, the Ferric sulfate was more proper coagulant than the Alum. It was showed that TOC removal was improved 5% and over by the addition of Calcium hydroxide, and $30mg/\ell$ of sludge yield was decreased(B79). When Alum or Ferric sulfate was used as a coagulant, pH condition for most effective color removal was 5 in B56 solution. In case of Ferrous sulfate as a coagulant, most effective pH condition for color removal was 9. When Ferric sulfate or Ferrous sulfate was used as a coagulant, pH condition for most effective color removal was 9 in B79 solution.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.952-961
• /
• 2013

This study optimizes a suitable dyeing method for polylactic acid (PLA) fabrics using disperse dyes. For this, disperse red 60 (DR 60), disperse blue 56 (DB 56), and disperse yellow 54 (DY 54) were used and dyed on PLA fabrics dependent of dyeing temperature and time. The fastness of PLA fabrics dyed with three disperse dyes were evaluated; in addition, dye exhaustion, color strength (K/S value), and colorimetric properties of PLA fabrics were compared with PET fabrics. The experiments indicated optimum dyeability of PLA fabrics with disperse dyes. The dyeing temperature was $90^{\circ}C$ for every dye and the dyeing time were 20 min, 60 min, and 40 min for DR 60, DB 56, DY 54, respectively. PLA fabrics had good color fastness to washing, dry cleaning fastness, hot pressing fastness, rub fastness, and perspiration fastness by DR 60, DB 56, and DY 54. The dye exhaustion of PLA fabrics were lower than PET fabrics; however, K/S values were higher than PET fabrics.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.1-9
• /
• 2006

In order to dye polyester/cotton blend fabric by one-bath dyeing process with single disperse dye, a novel hetero-bifunctional bridge compound(DBDCBS) was synthesized and utilized. The DBDCBS was designed to contain two different reactive groups such as ${\alpha},{\beta}$-dibromopropionylamido and dichloro-s-triazinyl groups. The ${\alpha},{\beta}$-dibromopropionylamido group shows considerable reactivity towards amines or amino groups at acidic condition and high temperature. In contrast, the dichloro-s-triazinyl group has reactivity towards hydroxyl groups at alkaline condition and room temperature. In order to examine whether as a bridge the compound could combine dyes containing amino groups with cellulosic substrates, disperse dyes containing amino group were tried to dye the cotton fibers pretreated with the DBDCBS compound. By the results, polyester/cotton blends were dyed by one-bath dyeing process with single disperse dye,1,4-diaminoanthraquinone.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.31-39
• /
• 2021

In this study, the dyeing properties of supercritical fluid dyed nylon fabrics were investigated which use two types of dyes for dyeing nylon. For other dyeing conditions were referred to related literature, and dyeing was performed with different dyeing concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, the color intensity increased as the concentration increased, but the increase was insignificant at high concentration. This tendency was more obvious in C.I. Disperse Orange 155 than in C.I. Disperse Yellow 42. The dye absorption rate also decreases as the concentration increases, but at 0.85% o.w.f concentration, C.I. Disperse Yellow 42 was 97.29% and C.I. Disperse Orange 155 was 93.77%. For both dyes, the wash fastness dropped by 0.5 to 1 class from the sample that was dyed at a concentration of 0.5% o.w.f in the wash fastness test.

• 청정기술
• /
• 제13권3호
• /
• pp.173-179
• /
• 2007

본 연구에서는 초임계이산화탄소 분위기 하에서 고분자섬유인 PTT(poly(trimethylene terephthalate))와 PET(poly(ethylene terephthalate))에의 분산염료 C. I. Disperse Yellow 54의 평형수착량을 온도와 압력, 그리고 시간에 따라 측정하였다. PTT와 PET 모두 온도와 압력이 증가함에 따라 염료의 수착량이 증가하였으나, 압력에 따른 수착량의 증가속도는 감소하였다. 또한 PTT가 PET보다 훨씬 더 큰 염료의 수착량을 나타냈으나, PTT와 PET 모두 같은 온도와 압력에서의 수착량의 증가속도는 시간이 지남에 따라 감소하였다.