• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.180-188
• /
• 2012

Following the reported study that showed the dyeability of diamino-anthraquinoid blue dyes substituted with relatively shorter alkyl groups, the longer aliphatic substituents than pentyl group were examined in terms of the color strength and fastness properties toward UHMWPE fibers. The color strength was increased up to pentyl group and then gradually decreased. However, the fastness properties were improved continuously to octyl group which was the longest alkyl substituent in this study. The most effective maximum color strength was obtained at $130^{\circ}C$ for 2 hours with 3% owf of dyes. The overall fastnesses to washing, rubbing, and light were good enough for practical uses.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.1
• /
• pp.100-107
• /
• 1998

Polyester filaments were dyed with disperse dye in dyebath containing water and water miscible organic solvents . acetone, 1,4-dioxane, DMF. In case of Acetone and 1,4-dioxane, the equilibrium dyeuptake was maximun at the volume fraction 0.05. The equilibrium dye uptakes were decreased as volun~e fraction of organic solvents were increased. When the volume fractions of water miscible organic solvents were varied, dye uptake was increased constantly with dyeing time. In dyebath containing water and water miscible organicsolvent, the dyeuptake was increased quickly during initial 40∼ 60 min. and slowly increased there after. The slope of Ct/Coo to t was greater in dyebath containing water and water miscible organic solvents than dyebath containing water. The differences of the slope with volulne fractions of water miscible organic solvent were not shown big.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.381-390
• /
• 2001

The optimum carrier concentrations were obtained by the maxmium exhaustion ratios of polyester fabrics at 8$0^{\circ}C$ . The optimum concentrations of methylsalicylate, acetophenone, anisole, propiophenone, 2-ethyl hexyl alcohol, ethylene glycol and propylene glycol were $3g/\ell,\;12g/\ell,\;7g/\ell,\;5g/\ell,\;3g/\ell,\;35g/\ell,\;and\;40g/\ell$, respectively Azo, anthraquinone, and quinoline disperse dyes were quite stable up to PH 10.3, but nitro disperse dye were severely hydrolyzed in alkaline dyeing. The tensile strength decreased with increasing dyebath pH because the polyester fabrics were easily decomposed by alkali. The reduction cleaning could be canceled in alkaline dyeing because the carriers were solved by alkali during dyeing.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.23-23
• /
• 2001

The optimum carrier concentrations were obtained by the maxmium exhaustion ratios of polyester fabrics at 80℃. The optimum concentrations of methylsalicylate, acetophenone, anisole, propiophenone, 2-ethyl hexyl alcohol, ethylene glycol and propylene glycol were 3g/ℓ, 12g/ℓ, 7g/ℓ, 5g/ℓ, 3g/ℓ, 35g/ℓ, and 40g/ℓ, respectively. Azo, anthraquinone, and quinoline disperse dyes were quite stable up to pH 10.3, but nitro disperse dye were severely hydrolyzed in alkaline dyeing. The tensile strength decreased with increasing dyebath pH because the polyester fabrics were easily decomposed by alkali. The reduction cleaning could be canceled in alkaline dyeing because the carriers were solved by alkali during dyeing.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.23-29
• /
• 2003

Dyeings of the most widely used to the synthetic fibers, namely polyamide and polyester, have been carried out using acid dyes and disperse dyes. The above mentioned dye types, and indeed all dyes onto substrates, rely on the reaction properties between the substrates and dye molecules. In terms of fastness properties, however, especially to washings, the satisfactory levels are not present in the results from acid and disperse dyeings. Thus, vat dyeings leaves a feasibility and are an alternative way to overcome the problem. Although attempts and works have been reported in early years, with little if any commercial achievement and success. In this context, to meet increased demands towards a high level of wash fastness from consumers and retailers, an attempt using vat dyes has been carried out in this work.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.21-26
• /
• 2009

In order to analyze numerically the hydrophobicity of the new dyes synthesized for unmodified pure polypropylene fibers, the octanol-water partition coefficient (logP), which is one of molecular descriptors representing hydrophobicity of organic compounds, was obtained by a semi-empirical method using Chem3D software. For the dyes of higher logP than around 5, the affinity of the dyes towards unmodified polypropylene fiber was substantial. In contrast to the new dyes for polypropylene, conventional disperse dyes have logP values lower than 5 and exhibited poor affinity.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.32-35
• /
• 1998

Polypropylene fibers are difficult to dye by conventional dyeing techniques due either to lack of dye receptor sites in their molecular structure to with the dye molecules may become attached, or to difficult of penetration of certain types of dye molecules into the structure$^1$. Although the diffusion coefficient of disperse dyes into polypropylene is quite high, the saturation values are very low.(omitted)

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.13-19
• /
• 2005

Dyeing and fastness properties of direct spun type PET microfiber fabrics have been investigated. The dye uptake of finer microfibers commenced at lower temperatures and showed faster rate of dye uptake. The build-up and wet fastness properties of disperse dyes on finer microfbers were relatively poor since the more dye was needed to achieve a given depth of shade due to the large surface area.

• Textile Coloration and Finishing
• /
• v.10 no.2
• /
• pp.37-44
• /
• 1998

In this study, the polyurethane microcapsules containing disperse dye were prepared by in-situ polymerization method using hexamethylene diisocyanate (HDI, aliphatic type) and m-xylene diisocyanate(XDI, aromatic type) with ethylene glycol (EG) And the size, shape, particle size distribution, and breaking behavior of microcapsules prepared were investigated. The size and shape of microcapsule were observed by scanning electron microscope (SEM) . The particle size distribution was analyzed by image analyzer. The breaking behavior of microcapsule was checked by measuring the optical density of solution that the disperse dye was dissolved after the microcapsule was broken by constant pressure. The particle size was inversely proportional to the stirring speed, and the size of microcapsule prepared from HDI and EG was smaller than that of microcapsule prepared from XDI and EG. Aliphatic type microcapsule was broken easily, compared with aromatic type one. It was considered due to the difference of reactivity between HDI and XDI. And the microcapsule prepared by stirring strongly was broken easily.