• Quality Improvement in Health Care
• /
• v.20 no.1
• /
• pp.28-40
• /
• 2014

Objectives: Prescriptions for Parkinson's can be dispensed at the outpatient pharmacy. In general, the treatment of Parkinson's disease requires a multitude of drugs, sometimes taken 4 to 6 times a day at specific times as prescribed by the medical practitioner. Said "time-specific therapy" is one of the major reasons of dispensing delay observed at the outpatient pharmacy. Because our establishment lacked a computerized system to support time-specific prescriptions, they were not recognized electronically. They had to be issued and dispensed manually, which required a greater amount of time than the automated process. To solve the problem, a new sig code was developed to handle time-specific prescriptions with a comprehensive automated dispensing system to support it. This study aims to create electronic programs and streamline the process to increase dispensing performance. And thus, ensure greater patient safety and dispensing accuracy within a shorter dispensing time and also increase employee satisfaction through a decreased workload. Methods: After identifying the problems caused by non-electronic prescriptions an automated system that allowed the issuance of time-specific prescriptions was developed. A new sig code was created that could be recognized by the Pharmacy electronic medical program, the label printer to group medications by administration times and the Automatic Tablet Counter(ATC) to count the grouped drugs accordingly. Result: With the new sig code, the practitioner became able to electronically select the times of drug administration while issuing the prescription. This 'time-specific prescription' can now be recognized by the pharmacy electronic medical program, the label printer and the ATC like any other prescription. Conclusion: The developed program started operating on September 2013. Although not all Parkinson's patients have been issued with the new electronic 'time-specific prescription', the overall dispensing process has become more streamlined and accurate. As the medical team continues to integrate the new system in their practice an additional decrease of the dispensing time is predicted. Future program upgrades and other new time-saving approaches are scheduled, which are expected to further increase the service quality of our outpatient pharmacy.

• Clean Technology
• /
• v.20 no.2
• /
• pp.97-102
• /
• 2014

Currently various studies are underway for dispensing high-viscosity phosphor. These studies have reported limitations and challenges in the dispensing process. The discharged amount of phosphor was approximately the same each time which is important for the implementation of high-efficiency white LED technology. This paper present high-viscosity phosphor dispensing process for white LED implementation by using electrostatic printing technology. The voltage controlled DOD (Drop-On-Demand) discharge experiment was studied to determine angle of drop meniscus at nozzle and dot diameter. With increase in Discharge voltage, the discharge angle of meniscus increased while dot diameter decreased. Therefore it can be concluded that we can control the discharge rate by controling the discharge angle of meniscus.

• Journal of Korean Medical classics
• /
• v.23 no.1
• /
• pp.133-142
• /
• 2010

Preconditions for the separation of prescribing and dispensing medicinal herbs in Traditional Korean Medicine are classification of medicinal herbs for general public and special medical uses, establishment of national medicinal herb distribution company of governmental base, restriction in purchase of medicinal herbs for special medical use, partnership between doctors and pharmacists of Traditional Korean Medicine, and coverage of herbal medicine-based medication in national health insurance, etc. The number of Traditional Korean Medicine Pharmacists which was born during 'the herbal medicine conflict' initiated in 1993, goes over 1,000 and will increase by 120 annually. The number of Traditional Korean Medical Doctors is over 17,000 and increases by 850 annually. So in order to engage partnership between two groups, the government have to arrange the number of outputs of each group. Standardization and classification of diagnosis and diseases in Traditional Korean Medicine is a matter of course in the separation of prescribing and dispensing medicinal herbs. Related societies and academies need to do researches with governmental fund first. After these works, we can launch a task force team for implementation of process for the separation of prescribing and dispensing medicinal herbs in Traditional Korean Medicine properly. Entering the national health insurance system for full coverage of Korean Medicine care service will be essential for the patients. Implementation the separation of prescribing and dispensing medicinal herbs in Traditional Korean Medicine would be the core of health insurance coverage for medication.

• Health Policy and Management
• /
• v.10 no.2
• /
• pp.41-77
• /
• 2000

This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.

• Health Policy and Management
• /
• v.11 no.1
• /
• pp.87-106
• /
• 2001

There has been a series of struggles around the governmental enforcing separation of prescribing and dispensing since the consensus for the policy at May 10, 1995, and the strike among the physicians nationwide at June 19, 2000. This thesis is to review the process of the affair as a whole and find out some achievements and lessons from it. Most visible achievement is that physicians have obtained governmental apology for the enforcing the unprepared policy, and promise to revise the Law on the Pharmaceutical Affairs, to enlarge governmental support for the medical insurance program, to construct a presidential committee for the reformation of medical affairs, and so on. Besides these achievements, physicians have learned much on the relations among them and with society in general. However this is only the first scene on the road to an extensive transformation in the medical area following more critical Issues on the medical reformation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.41-48
• /
• 2014

Direct writing(DW) is a method of patterning materials to a substrate directly, without a mask. It can use a variety of materials and be applied to various fields. Among DW systems, the flow-based type, using a syringe pump and nozzle, is simpler than other types. Furthermore, the range of materials is exceptionally wide. In additive processes, a three dimensional structure is made of stacking layer. Each layer is made of several lines. In this regard, good surface roughness of fabricated layers is essential to three dimensional fabrication. The surface roughness of any fabricated layer tends to change with the dispensing pattern. When multiple layers fabricated by a nozzle dispensing system are stacked, control of the nozzle position from the substrate is important in order to avoid interference between the nozzle and the fabricated layer. In this study, a fluid direct writing system for three dimensional structure fabrication was developed. Experimentsto control the position of the nozzle from substrate were conducted in order to examine the characteristics of the material used in this system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.123-128
• /
• 2021

Liquid dispensing systems are extensively used in various industries such as display, semiconductor, and battery manufacturing. Of the many types of dispensers, drop-on-demand piezoelectric jetting systems are widely used in semiconductor industries because of their ability to dispense minute volumes with high precision. However, due to the problems of nozzle clogging and undesirable dispensing behavior in these dispensers, which often result in device failure, the use of highly viscous fluids is limited. Accordingly, we studied the behaviors of droplet formation based on changes in viscosity. The effects of surface energy and the inner diameters of needle-type nozzles were also studied. Results showed that nozzles with lower surface energies reduced the ejection volume of droplets when a smaller nozzle diameter (0.21 mm in this study) was applied. These results indicate that the hydrophobic treatment of nozzle surfaces and the use of smaller nozzle diameters are critical factors enabling the use of highly viscous fluids in precision dispensing applications.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.83-87
• /
• 2015

In this paper, we fabricated a low-cost glucose sensor with a simpler structure and fabrication process than the existing glucose sensor. The currently used glucose sensor has a three-layer structure with upper, middle, and bottom plates; here, we fabricated a single-layer glucose sensor using only a printing and dispensing process. We successfully fabricated the glucose sensor using a simple method involving the formation of an electrode and insulator layer through a 2- or 3-step printing process on plastic or paper film, followed by the dispensing of glucose oxidase solution on the electrode. Cyclic voltammetry (CV) and cyclic amperometry (CA) measurements were used to evaluate the characteristics of the fabricated single-layer glucose sensor. Also, its sensitivity was analyzed through glucose-controlled blood measurements. Hence, a low-cost single-layer glucose sensor was fabricated with evaluation of its characteristics demonstrating that it has useful application in medicine.

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.425-431
• /
• 2005

Line Shaped Solid Oxide Fuel Cell (SOFC) with multilayered structure has been fabricated via direct-writing process. The cell is electrolyte of Ni-YSZ cermet anode, YSZ electrolyte and LSM cathode. They were processed into pastes for the direct writing process. Syringe filled with each electrode and electrolyte paste was loaded into the computer-controlled robe-dispensing machine and the paste was dispensed through cylindrical nozzle of 0.21 mm in diameter under the air pressure of 0.1 tow onto a moving plate with 1.22 mm/s. First of all, the anode paste was dispensed on the PSZ porous substrate, and then the electrolyte paste was dispensed. The anode/electrolyte and the PSZ substrate were co-fired at $1350^{\circ}C$ in air atmosphere for 3 h. The cathode layer was similarly dispensed and sintered at $1200^{\circ}C$ for 1 h. All the electrode/electrolyte lines were visually aligned during the direct writing process. The effective reaction area of fabricated SOFC was $0.03 cm^2$, and the thickness of anode, electrolyte and cathode was 20 $\mu$m, 15 $\mu$m, and 10 $\mu$m, respectively. The single line-shaped SOFC fabricated by direct-writing process exhibited OCV of 0.95 V and maximum power density of $0.35W/cm^2$ at $810^{\circ}C$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.199-202
• /
• 2003

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising method for cost-effectively defining nanoscale structures at room temperature and low pressure. Since the resolution of nanostructures depends strongly upon that of nanostamps, the nanostamp fabrication technology is a key technology to UV-NIL. In this paper, a 5$\times$5$\times$0.09 in. quartz stamp whose critical dimension is 377 nm was fabricated using the etch process in which a Cr film was employed as a hard mask for transferring nanostructures onto the quartz plate. To effectively apply tile fabricated 5-in. stamp to UV-NIL on a 4-in. Si wafer, we have proposed a new UV-NIL process using a multi-dispensing method as a way to supply resist on a wafer Experiments have shown that the multi-dispensing method can enable UV-NIL rising a large-area stamp.