• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2113-2120
• /
• 2013

In this study, an efficient machine vision based inspection system is developed for the in-line measurement of phosphor resin dispensing shapes on LED chip package. Since the phosphor resin (target material) has semitransparent characteristics, illuminated light beam is reflected from the bottom of the chip as well as from the surface. Since such phenomenon can deteriorate inspection reliability, a white LED and a 635nm laser slit beams are experimentally tested to decide suitable illumination optics. Also, specular and diffuse reflection methods are tested to decide suitable optical triangulation. As a result, it can be known that the combination of a white slit beam source and specular reflection method show the best inspection results. The Catmull-Rom spline interpolation is applied to the obtained data to form smoother surface. From the results, it can be conclude that the developed system can be sucessfully applied to the in-line inspection of LED chip packaging process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.395-396
• /
• 2011

• Health Policy and Management
• /
• v.10 no.2
• /
• pp.41-77
• /
• 2000

This study aimed at the analysis, from the perspective of rationality, of policy making process in the separation of prescribing and dispensing. This study is to identify the characteristics and problems of the policy process to introduce the new durg-prescription system, and make policy recommendations. In terms of separation of prescribing and dispensing, the development of policy making process can be divided into two periods; periods before and after the inauguration of the govemment of people. In the period before the govermment of poeple, one of the major characteristics of policy decision on the new system was the poweful influence of interset groups. At that time, the ministry lacked the problem-solving ability and commitment on the policy. Consequently, during the former period, the policy making process had been driven by interest groups. Therefore, the original purpose of the policy to secure the pulic health was lost. During the latter period, there was also the strong influence of interst groups, complexity of interest, the ministry's inability of problem solving. However, in this period, it is notable that this has drawn nation-wide attention, severl civic grouos have participated in the policy making process, and that the number and voice of these groups have remarkably increased. With regards to rationality, incrementalish model is highly sutable to explain the policy making process in the former period. But in the latter period when the new drugperscripition system became a national issue and civic groups began to participte in this matter more actively, rational model is more explanatory that incrementalism to understand the process. During the latter period, the original goal of this policy was not distored by a few interest groups thanks to the rapid development of civil movement and therebly a big influence of civic groups on the policy making. For that reson, a jigh level of rationality is found in the policy-making process of the latter period. Some suggestions to achieve the rationality in the policy making process based on the results of this study are as follows; Frist, the public's participation should be enered in the policy making process. Second, the govermment should make contiuns efforts to enhance its ability of long-term planning and policy implementation, and increase rationality of policy making process. Third, balance among interset groups should take place in the process of policy making. Forth, sound, constructive, and logical activity of interest groups is necessary to express and promote their interests.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2015

For chromaticity correction, it is necessary to dispense high viscosity phosphor slurry since it greatly affects the performance of white LEDs. However, it is quite difficult to dispense high viscosity fluorescent materials. In the current study, micro-discharge electrostatic printing has been used for dispensing various high viscosity phosphor slurries. We have achieved dispersions of up to 50 µg using drop on demand (DOD) discharge experiments. The experiments were conducted with different combinations of process variables such as applied voltage, pneumatic pressure, and frequency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Korean Journal of Clinical Pharmacy
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2010

Therapeutic duplication (TD) is a serious problem that frequently occurring primarily in the ambulatory setting in Korea. Implementation of concurrent drug utilization review (DUR) is a promising way to reduce inappropriate prescription and dispensing, and improve patient safety. This study was aimed to develop the process of DUR module of TD. Sixty-five drug ingredients classified into the drug category of the antipyretic, analgesic, and anti-inflammatory drug approved in Korea (The KFDA-dess nated classification codes of 114 or 264) were reviewed for this purpose. The drug ingredients (and products) were reclassified based on WHO's Anatomical, Therapeutic and Chemical (ATC) classification system. The clinical practice guidelines, textbooks and product labels on therapeutic uses of these drugs in Korea and several fores n countries were reviewed. If the drugs were categorized into the same therapeutically duplicable class, they were defined not to be used concurrently because the concurrent use was "therapeutically duplicated (unnecessary or even harmful)". Among the studied drug products, the following 5 drug classes were considto beas "therapeutic duplication": (1), on-t tooid DURnti-inflammatory drugs (NSAIDs, including s Dicylates), (2),Anilidts, (3),Opioids, (4) Ergot Dk Doids and (5) 5-$HT_1$ receptor agonot s. Therefore, concurrent prescribing or dispensing of more than 2 drug ingredients any in the above same classes should be considered as TD and needed to be warrant for careful review by pharmacists before dispensing.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.52-58
• /
• 2017

An ultra-high precise ejection process is essential in a dispensing system for fabricating various precision parts such as a semiconductor, LED, and camera module. The size of such parts has been decreasing, which implies that a precise ejecting technique is required. A phosphor-containing liquid is ejected via a dispenser using dual piezoelectric actuators that are used for generating a high-speed dispensing mechanism. The rod and nozzle continuously contact in high speed to eject the liquid. However, the high-strength filler or phosphor in the liquid causes wear on the surfaces of the rod and nozzle during the dispensing process. As a result, the ejection reliability decreases as the wear on the surfaces increases. Therefore, it is necessary to estimate the wear characteristics of the rod and nozzle via an experiment and FE analysis. Reliability rests up to 1,000 cycles are conducted under relatively severe conditions. The flow rate and surfaces roughness of the rod and nozzle are measured in each ejection cycle. The surface images and wear volume are obtained before and after the tests and the ejection reliability is confirmed by measuring the flow rate of the liquid. The experimental results show that the ejection reliability is maintained up to 1,000k cycles; these results are validated by the simulation results.

• YAKHAK HOEJI
• /
• v.49 no.6
• /
• pp.449-458
• /
• 2005

There have been rapid changes in the pharmaceutical environment after the separation of Dispensing and Prescribing practice. In the early stage of this system, outpatients had few options to choose their pharmacies due to various obstacles. Under these circumstances, this study on the defection tendency of long-term care patients was performed through the analysis of outpatients who quit visiting a pharmacy nearby general hospital. PowerBuilder ver 9.0 program was used to extract significant data, and SPSS package was employed for statistic analysis. 3,308 outpatients who visited a pharmacy nearby hospital for a month (in January, 2004) were studied. Patients' sex, age and location of residence, the class of medical insurance, the characteristic type of medication (powder, split form, medication for external use/injection), waiting time, disease (department) were considered as variable factors. It turned out that the patient revisit ratio was 80.8$\%$ and the patient defection ratio was 32.4$\%$. As was expected, those factors mentioned above influenced on the revisit and defection ratio considerably. In terms of patient factors, it proved that there was no relationship among sex, location of residence, the class of medical insurance and revisit (defection) ratio. Only age factor influenced the ratio; the older, the higher revisit ratio and the less defection ratio. In respect of dispensing factors, there were obvious relationships among the factors and the ratio: bill (money they had to pay individually), waiting time, number of medications, splitting of tablets, unit price of drug and revisit (defection) ratio showed significant relationship. The result of this study revealed an aspect of outpatients' behavior and it could be used as a reference for better patient service and customer relationship management.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.382-393
• /
• 2024

The Microplotter system with a fluid dispensing method, sprays fluid based on ultrasonic pumping through piezoelectric devices. This technique can possible for various materials with a wide range of viscosities to be printed in microscale. In this paper, we introduces dispenser printing technology as well as aim to understand and apply various processes using the equipment. In addition, we will explain how to optimize the equipment by adjusting parameters such as spray intensity, tip height during printing, and patterning speed. By utilizing Microplotter's advantage of being compatible with a wide range of fluids, including metal nanoparticles, carbon nanotubes, DNA, and proteins, it is expected to be used in various fields such as printed electronics, biotechnology, and chemical engineering.

• Korean Journal of Clinical Pharmacy
• /
• v.25 no.1
• /
• pp.18-26
• /
• 2015

Background: The recent change in pharmaceutical education system following the paradigm shift to patient-oriented pharmacy service requires an in-depth discussion to reorganize a future direction and establish a basis for maximizing social values of community pharmacy service. Objective: This study was conducted to review the current status of community pharmacy service provision in Korea based on published literatures. Methods: The electronic databases of National Digital Science Library and Electronic National Assembly Library were used to search the journal articles and dissertation papers. A search term "community pharmacy" was used and the published period was limited to papers published after year 2001, when the legal separation of prescribing and dispensing was implemented. Relevant study reports were also searched manually. Information about pharmacy service provision and study outcomes were retrieved from the selected papers, and classified by predefined individual service scope. Results: A total 33 papers reporting services provided by community pharmacies were selected (journal article 11, dissertation paper 17, and study report 5). Pharmacy services identified in these papers could be classified into prescription dispensing service, pharmaceutical care service, self medication service, other products service, and health promotion service. Twenty papers reported prescription dispensing services, three papers reported pharmaceutical care service, and only two papers reported health promotion service. Current community pharmacy services are highly dependent on prescription drugs while expanded services such as pharmaceutical care and health promotion are peripheral. Most prevalent research topic was medication counseling service (18 papers), reflecting that community pharmacists generally consider it to be the most important and fundamental service. Overall, current pharmacy services are very limited and focus on prescription dispensing service. Conclusion: At this point of time requiring expansion and quality improvement of community pharmacy services, we suggest further lively discussion to strengthen pharmacist's functional identity and set conditions for providing socially expected services.