• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.208-215
• /
• 1999

The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.1
• /
• pp.8-15
• /
• 2024

The CaF₂ single crystal has notable characteristics such as a large band gap (12 eV), excellent transparency over a wide wavelength range, low refractive index and dispersion. Due to these outstanding properties, CaF₂ single crystal has considered as a promising material for short-wavelength light sources in recent lithography processes. However, there is an inherent birefringence of the material at 157 nm and the resulting aberration can be compensated for through the combination of the (100) plane and the (111) plane. Therefore, it is necessary to investigate the characteristics according to the plane. In this study, we analyzed crystallinity, optical properties of commercial CaF₂ single crystal wafers grown by the Czochralski method. In particular, through chemical etching under various conditions, it was confirmed that the shape of etch pits appears differently depending on the plane and the shape and array of specific etch pits affected by dislocations and defects were examined.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.2
• /
• pp.98-103
• /
• 2010

Purpose: We reported the results of arthroscopically assisted lateral release and medial imbrication for the recurrent patella dislocation. Materials and Methods: Twenty patients (20 knees) underwent arthroscopically assisted surgery for the recurrent patella dislocation. There were 4 males and 16 female. The average age was 20.2 years. All patients had definite trauma history and average follow-up period was 19 months. The surgical results were evaluated according to the Lysholm knee score and the Kujala score. The congruence angle and lateral patellofemoral angle were measured on plain radiograph and the tibial tubercle-trochlear groove distance was calculated on computerized tomography. Results: The median value of preoperative congruence angle was $16.5^{\circ}$ (range, $0.0{\sim}+34^{\circ}$) and the average final follow-up was $-6.4^{\circ}$ (range, $-19{\sim}10^{\circ}$) with statistically significant improvement (p=0.025). The median value of preoperative Lysholm knee score was 70 (range, 63~81) and the final follow-up score had changed to 88 (range, 80~95) with statistically significant improvement (p=0.0341). The median value of preoperative Kujala score was 72 (range, 65~80) and the average final follow-up score showed 87 (range, 80~92) with statistically significant improvement (p=0.024). Recurrent dislocations after surgery occurred in 2 cases, one case which showed positive "thumb to forearm test" had been treated with medial patellofemoral ligament reconstruction. Conclusion: Arthroscopically assisted lateral release and medial imbrication for recurrent patella dislocation without bony malaligmenent showed the effective treatment, but would be inappropriate for the patients with the generalized joint laxity.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.99-105
• /
• 2007

Purpose: The morphological study and dynamic stability of the ulnar nerve around the elbow joint was investigated in asymptomatic normal population using ultrasonography. The purpose of this study is to provide fundamental data for ultrasonographic diagnosis of ulnar neuropathy in cubital tunnel syndrome. Materials and Methods: Fifty cases of 25 healthy male volunteers, aged between 20 to 30 years, included in this study. High resolution 7.5 MHz linear probe was used to examine the ulnar nerve in axial and longitudinal views. In a longitudinal view, the course, position and the thickness of nerve were monitored, the diameter of ulnar nerve and dynamic stability at elbow flexion and extension were measured in an axial view at four different points; 1cm proximal to medial epicondyle, behind the medial epicondyle, entrance to Osborne ligament, and 1cm distal to Osborne ligament. Results: The short diameters of ulnar nerve at elbow extension at four anatomic points were 2.66 mm, 2.97 mm, 2.64 mm, and 2.69 mm and the long diameters were 4.61 mm, 4.56 mm, 4.36 mm, and 4.37 mm, which showed no significant change at each point. However, at elbow flexion, the short diameters were changed to 2.72 mm, 2.34 mm, 2.65 mm, and 2.41 mm and the long diameters into 4.49 mm, 5.40 mm, 4.16 mm, and 4.66 mm. At elbow flexion, significant morphologic change was observed in the medial epicondyle area, and the diameter of the ulnar nerve was shortest at the entrance of Osborne ligament both at flexion and extension. In terms of dynamic stability, nine subluxations and seven dislocations were observed. Conclusion: This study shows dynamic instability and a morphological change of long and short diameters of ulnar nerve at flexion and extension in a normal person, which should be considered in the ultrasonographic diagnosis of ulnar neuropathy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.5-10
• /
• 2012

In general, the fabrications of the LEDs with mesa structure are performed grown by MOCVD method. In order to etch and separate each chips, the LEDs are passed the RIE and scribing processes. The RIE process using plasma dry etching occur some problems such as defects, dislocations and the formation of dangling bond in surface result in decline of device characteristic. The SAG method has attracted considerable interest for the growth of high quality GaN epi layer on the sapphire substrate. In this paper, the SAG method was introduced for simplification and fabrication of the high quality epi layer. And we report that the size of selective area do not affect the characteristics of original LED. The diameter of SAG circle patterns were choose as 2500, 1000, 350, and 200 ${\mu}m$. The SAG-LEDs were measured to obtain the device characteristics using by SEM, EL and I-V. The main emission peaks of 2500, 1000, 350, and 200 ${\mu}m$ were 485, 480, 450, and 445 nm respectively. The chips of 350, 200 ${\mu}m$ diameter were observed non-uniform surface and resistance was higher than original LED, however, the chips of 2500, 1000 ${\mu}m$ diameter had uniform surface and current-voltage characteristics were better than small sizes. Therefore, we suggest that the suitable diameter which do not affect the characteristic of original LED is more than 1000 ${\mu}m$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1482-1491
• /
• 2013

The purpose of this study was to investigate the safety accidents and physical fatigues of school foodservice employees. Out of 300 questionnaires distributed from December 1~20, 2011, 276 responded. After excluding 54 incomplete questionnaires, 222 (usage rate: 74%) were examined in the final analysis. First, our results showed that in terms of safety accidents, most received bruises (92.8%), followed by burns (73.0%), cuts and lacerated wounds (69.4%), sprains (47.7%), falls (42.8%), fractures/dislocations (31.5%) and electric shock (2.7%). Second, we found that the average degree of physical fatigue of school foodservice employees was 3.65 based on the 5-point Likert scale. Specifically, pain in the arms and wrist was rated the highest, at 4.18. Third, results showed that the factors affecting physical fatigue were 'class of school' (P<0.05), 'frequency of meal serving per day' (P<0.05), 'no. of meals served per day' (P<0.001), 'no. of meals per employee' (P<0.05) and 'warm-up exercise before starting work' (P<0.05). This means that foodservice employees serving middle schools, serving meals three times per day, serving more than 1,000 meals per day, and serving more than 111 meals per employee perceive higher levels of physical fatigue. In addition, the physical fatigue of those who perform warm-up exercises before starting work was significantly lower than those who do not perform warm-up exercises before work (P<0.05). In conclusion, the frequently occurring major safety accidents of school foodservice employees were bruises and burns. An increase in workload also leads to the increasing physical fatigue of school foodservice employees. Thus, to lower the physical fatigue of school foodservice employees, school foodservice employees should be encouraged to perform warm-up exercises before staring work and new staffing guidelines for school foodservice employees should be developed.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.3
• /
• pp.379-388
• /
• 2000

Objective : Although transoral transpharyngeal approach is a very useful method for the lesions of craniovertebral junction, it is not frequently used because of anatomical unfamilarity, risk of cerebrospinal fluid(CSF) leakage, and resultant postoperative meningitis. To evaluate the usefulness of transoral transpharyngeal approach for various lesions of craniovertebral junction, clinical characteristics and the results of this approach are investigated. Methods : Transoral transpharyngeal approaches were performed in eight cases between 1996 and 1999. Among them, there were three basilar invaginations due to congenital anomalies, two odontoid type I fractures, two atlantoaxial dislocations, and one pseudotumor. Surgical methods included five cases of anterior decompression and posterior fusion, two anterior approaches for decompression and one transoral approach for biopsy. Results : This procedure allowed immediate clinical improvement in all cases. In seven patients with preoperative motor deficit showed a progressive neurological improvement. The follow-up plain x-rays demonstrated successful bony fusion in all patients. Only one patient suffered from postoperative wound dehiscence, but she completely recovered after wound revision. There was no complication of postoperative CSF leakages. Conclusions : Transoral transpharyngeal approach for the ventral lesions of craniovertebral junction, can be used as a relatively simple and effective method.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.418-426
• /
• 2019

Purpose: This study analyzed the features of humeral head decentralization in large to massive rotator cuff tears with a shoulder dislocation in the elderly. Moreover, shoulder instability and treatment were reviewed. Materials and Methods: From May 2005 to February 2017, Group A containing 45 cases (45 patients) over 65 years old accompanied by a large or massive rotator cuff tear with a shoulder dislocation and Group B containing 45 cases (45 patients) without a shoulder dislocation were enrolled. The mean ages in Groups A and B were 73.2 and 72.1 years old, and the mean follow-up periods were 30.7 and 31.3 months, respectively. Twenty-one cases (46.7%) in Group A underwent rotator cuff repair, and 8 cases (17.8%) underwent concomitant rotator cuff repair with Bankart repair. Sixteen cases (35.6%) underwent reverse total shoulder arthroplasty for cuff tear arthropathy. 45 cases (100%) in Group B underwent rotator cuff repair. The off-the center and head elevation were measured in the preoperative magnetic resonance imaging (MRI) of Groups A and B. The preoperative and postoperative visual analogue scale (VAS) score, American Shoulder and Elbow Surgeons (ASES) score, and University of California Los Angeles (UCLA) score in Groups A and B were compared. Results: In Groups A and B, the mean off-the centers were posterior 7.41 mm and posterior 2.02 mm (p=0.03), and the mean head elevations were superior 6.66 mm and superior 2.44 mm (p=0.02), respectively. The mean ASES scores of Groups A and B were 32.8 and 33.4 before surgery, and 77.1 (p=0.02) and 78.1 (p=0.02) after surgery (p=0.18), respectively. The mean UCLA scores of Groups A and B were 13.1 and 12.8 before surgery, and 28.9 (p=0.02) and 29.5 (p=0.01) after surgery (p=0.15), respectively. Conclusion: Patients over 65 years old with a shoulder dislocation in large to massive rotator cuff tears had higher off-the center and head elevation on the preoperative MRI than those without a shoulder dislocation. This measurement can help predict preceding shoulder instability. Early rotator cuff repairs should be performed and other treatments, such as Bankart repair and reverse total shoulder arthroplasty, should also be considered.