• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.429-438
• /
• 1997

Mechanical valve is one of the most widely used implantable artificial organs of which the reliability is so important that its failure means the death of patient. Therefore early noninvasive detection is essentially required, though mechanical valve failure with thrombosis is the most common. The objective of this paper is to detect the thrombosis formation by spectral analysis and neural network. Using microphone and amplifier, we measured the sound from the mechanical valve which is attached to the pneumatic ventricular assist device. The sound was sampled by A/D converter(DaqBook 100) and the periodogram is the main algorithm for obtaining spectrum. We made the thrombosis models using pellethane and silicon and they are thrombosis model on the valvular disk, around the sewing ring and fibrous tissue growth across the orifice of valve. The performance of the measurment system was tested firstly using 1 KHz sinusoidal wave. The measurement system detected well 1KHz spectrum as expected. The spectrum of normal and 5 kinds of thrombotic valve were obtained and primary and secondary peak appeared in each spectrum waveform. We find that the secondary peak changes according to the thrombosis model. So to distinguish the secondary peak of normal and thrombotic valve quantatively, 3 layer back propagation neural network, which contains 7, 000 input node, 20 hidden layer and 1 output was employed The trained neural network can distinguish normal and valve with more than 90% probability. As a conclusion, the noninvasive monitoring of implanted mechanical valve is possible by analysing the acoustical spectrum using neural network algorithm and this method will be applied to the performance evaluation of other implantable artificial organs.

• Structural Engineering and Mechanics
• /
• v.37 no.4
• /
• pp.427-442
• /
• 2011

In fatigue life design of mechanical components, uncertainties arising from materials and manufacturing processes should be taken into account for ensuring reliability. A common practice is to apply a safety factor in conjunction with a physics model for evaluating the lifecycle, which most likely relies on the designer's experience. Due to conservative design, predictions are often in disagreement with field observations, which makes it difficult to schedule maintenance. In this paper, the Bayesian technique, which incorporates the field failure data into prior knowledge, is used to obtain a more dependable prediction of fatigue life. The effects of prior knowledge, noise in data, and bias in measurements on the distribution of fatigue life are discussed in detail. By assuming a distribution type of fatigue life, its parameters are identified first, followed by estimating the distribution of fatigue life, which represents the degree of belief of the fatigue life conditional to the observed data. As more data are provided, the values will be updated to reduce the credible interval. The results can be used in various needs such as a risk analysis, reliability based design optimization, maintenance scheduling, or validation of reliability analysis codes. In order to obtain the posterior distribution, the Markov Chain Monte Carlo technique is employed, which is a modern statistical computational method which effectively draws the samples of the given distribution. Field data of turbine components are exploited to illustrate our approach, which counts as a regular inspection of the number of failed blades in a turbine disk.

• Pediatric Infection and Vaccine
• /
• v.6 no.2
• /
• pp.261-266
• /
• 1999

Vancomycin-resistant enterococcus(VRE) was first isolated from various specimens of patients with renal failure or leukemia in 1988. Thereafter VRE has been increasing gradually and became one of the clinically important palhogenic organisms currently. We experienced a case of E. faecalis sepsis in a 4 day old neonate. She was born at 39 weeks gestational age with 2,900gm weight by Cesarean section delivery due to breech presentation. She had had swelling and motion limitation of the left knee joint with fever for one day at age of 4 day and was transfered to our hospital. Ultrasonographic examination of her left knee joint showed some inflammatory change. E. faecalis was isolated from the blood. The organism showed resistance to vancomycin on drug susceptibility test using BHI agar screening test and disk diffusion method. After treatment with ampicillin-sulbactam for 3 weeks the baby was improved. Although VRE infection has been considered rare in Korea. considerable number of demonstrative studies about VRE isolation have been reported recently thus adequate countermeasures are needed to reduce the emergence and prevent nosocomial spreading of this organism.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.488-499
• /
• 1996

Diabetes mellitus revealed a chronic disorder of lipid, carbohydrate and protein metabolism characterized by insulin deficiency, and a striking tendency toward development of atherosclerosis, microangiopathy, nephropathy, neuropathy and recently cardiomyopathy etc. The mechanism of heart failure in patients with diabetic cardiomyopathy is not clear but diabetic cardiomyopathy usually occurs in persons with long standing diabetes. After diabetes induced in made Sprague- Dawley strain rats by injection of streptozotocin(60mg/kg), cardiac tissue with hematoxylin-eosin and Masson's trichrome stain was examined at 3 days, 1, 2, 4, 6 weeks later under light microscope. The results were obtained as follows : 1. In H&E stain of control group, myocardiac cells were shorter than skeletal muscle cell, which was branched out and connected each other at terminal with striation, intercalated disk and nucleus at center of cell. 2. In MT stain of control group, a few of collagen fibrile were seen at periva scular interstium, but wasn't seen between skeletal muscle fiber, and cardiac muscle was seen in various size. 3. In MT stain of experimental group, increased collagen fiber deposition at perivascular interstiums were seen periodically. 4. In MT stain of experimental group, increased collagen fiber deposition at interstitial matrix between perimyocardiac cells were seen at 3 day, 4 weeks and 6 weeks after DM induction. 5. In H&E stain of experimental group, partial degeneration of myocardiac cells was seen after 4 weeks of DM induction. From above results, streptozotocin induced diabetes mellitus increased collagen around perivascular and between intercellular matrix in heart.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1153-1157
• /
• 2013

A steam turbine blade is one of the core parts in a power plant. It transforms steam energy into mechanical energy. It is installed on the rim of a rotor disk. Many failure cases have been reported at the final stage blades of a low-pressure (LP) turbine that is cyclically loaded by centrifugal force because of the repeated startups of the turbine. Therefore, to ensure the safety of an LP steam turbine blade, it is necessary to investigate the fatigue strength and life. In this study, the low cycle fatigue life of an LP steam turbine blade is evaluated based on actual damage analysis. To determine the crack initiation life of the final stage of a steam turbine, Neuber's rule is applied to elastic stresses by the finite element method to calculate the true strain amplitude. It is observed that the expected life and actual number of starts/stops of the blade were well matched.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.130-143
• /
• 1997

A heat-pressed technique(IPS-Empress, Ivoclar) has been described to construct single unit crown, inlay/onlay and veneers using a partially pre-cerammed and pre-colored glass-leucite ingot that has the greateast strength by the combination of heat-pressed procedure through the smalldiameter sprue and heat treatment procedure. The purpose of this study was to evaluate the flexure strength of a heat-pressed ceramic material(IPS-Empress) without simulated firing treatments according to pontic designs. Two groups of 9 disks(1.4mm thick, 14mm in diameter) each using two types of sprues with different diameters($({\Phi}2.8\;,{\Phi}1.8)$) and numbers were prepared. The specimens were mounted in the testing jig. The flexural strengths were determined, by means of the bi-axial bending test, by loading the center of disk to failure using a universal testing machine(Zwick 145141, Zwick, Germany) at a cross-head speed of 1.0 mm/min. The means flexural strength value of one group using a sprue with ${\Phi}2.8$ was $140.4{\pm}8.0Mpa$. That of the other group using two sprues with ${\Phi}1.8$ was $151.8{\pm}10.3Mpa$. After analysis, results showed that there was a statistical difference between groups(t=2.33m p<0.05). No clnical implications were drawn from these data because of absence of simulated firing treatment.

• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.356-361
• /
• 2019

The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO₂, Si₃N₄ balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO₂ showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO₂ case in specimen and the highest friction coefficient. The case of Si₃N₄ showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.85-91
• /
• 2014

Cloud storage system uses a distributed file system for storing and managing data. Traditional distributed file system makes a triplication of data in order to restore data loss in disk failure. However, enforcing data replication method increases storage utilization and causes extra I/O operations during replication process. In this paper, we propose a data replication method using erasure codes in cloud storage system to improve storage space efficiency and I/O performance. In particular, according to data access frequency, the proposed method can reduce the number of data replications but using erasure codes can keep the same data recovery performance. Experimental results show that proposed method improves performance in storage efficiency 40%, read throughput 11%, write throughput 10% better than HDFS does.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.203-212
• /
• 2017

The National Housing Bond Information Relay System is a representative financial information relay system in which institutions are connected with center system. A centralized structure is expensive to construct and operate center, and there is a problem that all networks are disconnected when a failure occurs in the center system. In this paper, we propose the national housing bond information relay system model based on Blockchain technology that can process information safely and efficiently. The proposed model constructs a Blockchain network so that each institution that processes the national housing bond information can transmit information safely, and each institution manages the same distributed ledge by a smart contract. The proposed model can reduce the cost because it can process complicated national housing bond transaction information without a relay center, and a network usage and disk usage decreased by 1.7% and 8.53%.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.198-202
• /
• 2009

Split Hopkinson pressure bar(SHPB) is used to obtain compressive stress-strain data and deformation characteristics of brittle materials such as rock and concrete. SHPB demands both dynamic stress equilibrium condition and nearly constant strain rate before the failure of the specimen. Pulse shape technique, which places a thin metal disk between launched impact bar and incident bar, should be adopted to satisfy both conditions. In this study, metallic disks with various shapes were used to control the incident impact wave. The results show that the peak value of stress and the length of waves increased with decreasing thickness and diameter of the pulse shaper. In order to investigate shape and strain rate-dependency of the pulse shapers, dynamic compressive stress-strain curves were obtained and analyzed.