• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2701-2710
• /
• 1997

Recursive circulant graph has recently developed as a new model of multiprocessors, and drawn considerable attention to supercomputing, In this paper, we investigate the routing of a message i recursive circulant, that is a key to the performance of this network. On recursive circulant network, we would like to transmit m packets from a source node to a destination node simultaneously along paths, where the ith packet will traverse along the ith path $(o{\leq}i{\leq}m-1)$. In oder for all packets to arrive at the destination node quickly and securely, the ith path must be node-disjoint from all other paths. For construction of these paths, employing the Hamiltonian Circuit Latin Square(HCLS), a special class of $(n{\times}n)$ matrices, we present $O(n^2)$ parallel routing algorithm on recursive circulant network.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.

• Management Science and Financial Engineering
• /
• v.11 no.2
• /
• pp.85-103
• /
• 2005

In this paper, we consider the routing and wavelength assignment problem in survivable WDM transport network without wavelength conversion. We assume the single-link failure and a path protection scheme in optical layer. When a physical network and a set of working paths are given, the problem is to select a link-disjoint protection path for each working path and assign a wavelength for each working and protection path. We give an integer programming formulation of the problem and propose an algorithm to solve it. Though the formulation has exponentially many variables, we solve the linear programming relaxation of it by using column generation technique. We devise a branch-and price algorithm to solve the column generation problem. After solving the linear programming relaxation, we apply a variable fixing procedure combined with the column generation to get an integral solution. We test the proposed algorithm on some randomly generated data and test results show that the algorithm gives very good solutions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.124-127
• /
• 2001

We consider the routing and wavelength assignment problem in survivable WDM transport network without wavelength conversion. We assume the single-link failure and a path protection scheme in optical layer. When a physical network and a set of working paths are given, the problem is to select a link-disjoint protection path for each working path and assign a wavelength for each working and protection path. We give an integer programming formulation of the problem and propose an algorithm to solve it based on column generation technique and variable fixing. We devise a branch-and-price algorithm to solve the column generation problem. We test the proposed algorithm on some randomly generated data and test results show that the algorithm gives very good solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.23-29
• /
• 2006

In wireless sensor networks(WSNs), it is crucial to maintain network connectivity as long as possible since nodes are battery-powered and unchange-able. We propose a new routing protocol called Energy Aware Source Routing(EASR) which can be efficient in respect of network lifetime and long-term connectivity. Our protocol is multipath source routing, only one path will be selected at the same time and each path has probability to be selected like as Energy Aware Routing(EAR) protocol. The route discovery procedure of EASR protocol is reformed from the route discovery procedure of Split Multipath Routing(SMR) protocol. However, there is the difference between SMR and EASR. In EASR, we define an overhearing ratio in order to reduce energy waste due to overhearing effect among each selected path. Thus, we can establish energy efficient multiple paths by making use of overhearing ratio. The simulation results are also demonstrated that our scheme increases in network lifetimes, and achieves reasonable packet latency time.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.429-436
• /
• 2009

Odd network was introduced as one model of graph theory. In [1], it was introduced as a class of fault-tolerant multiprocessor networks and analyzed so many useful properties such as simple routing algorithms, maximal fault tolerance, node axsjoint path, etc. In this paper, we sauw a construction algorithm of edge-axsjoint spanning trees in Odd network $O_d$. Also, we prove that edge-disjoint spanning tree generated by our algorithm is optimal edge-disjoint spanning tree.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2002-2019
• /
• 2017

RPL routing protocol for low-power and lossy networks is an Internet Engineering Task Force (IETF) recommended IPv6 based protocol for routing over Low power Lossy Networks (LLNs). RPL is proposed for networks with characteristics like small packet size, low bandwidth, low data rate, lossy wireless links and low power. RPL is a proactive routing protocol that creates a Directed Acyclic Graph (DAG) of the network topology. RPL is increasingly used for Internet of Things (IoT) which comprises of heterogeneous networks and applications. RPL proposes a single path routing strategy. The forwarding technique of RPL does not support multiple paths between source and destination. Multipath routing is an important strategy used in both sensor and ad-hoc network for performance enhancement. Multipath routing is also used to achieve multi-fold objectives including higher reliability, increase in throughput, fault tolerance, congestion mitigation and hole avoidance. In this paper, M-RPL (Multi-path extension of RPL) is proposed, which aims to provide temporary multiple paths during congestion over a single routing path. Congestion is primarily detected using buffer size and packet delivery ratio at forwarding nodes. Congestion is mitigated by creating partially disjoint multiple paths and by avoiding forwarding of packets through the congested node. Detailed simulation analysis of M-RPL against RPL in both grid and random topologies shows that M-RPL successfully mitigates congestion and it enhances overall network throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1034-1042
• /
• 2008

It is very hard, but important to sustain path stability for a reliable communication in mobile ad hoc networks. We propose a novel source routing protocol that establishes a group path with virtual multiple paths to enable a robust communication. The entire mobile nodes form a disjoint set of clusters: Each has its clusterhead as a cluster leader and a unique cluster label to identify itself from other clusters. A group path is a sequence of cluster labels instead of nodes and the nodes with the same label collaborate to deliver packets to a node with next label on the group path. We prove by resorting to simulation that our proposed protocol outperforms the existing key routing protocols, even for a network with a high node mobility and a high traffic.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.443-461
• /
• 2014

Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. For one-hop overlay source routing, when a given primary path suffers from the link failure or performance degradation, the source can reroute the traffic to the destination via a strategically placed relay node. However, the over-heavy traffic passing through the same relay node may cause frequent package loss and delay jitter, which can degrade the throughput and utilization of the network. To overcome this problem, we propose a Load-Balanced One-hop Overlay Multipath Routing algorithm (LB-OOMR), in which the traffic is first split at the source edge nodes and then transmitted along multiple one-hop overlay paths. In order to determine an optimal split ratio for the traffic, we formulate the problem as a linear programming (LP) formulation, whose goal is to minimize the worse-case network congestion ratio. Since it is difficult to solve this LP problem in practical time, a heuristic algorithm is introduced to select the relay nodes for constructing the disjoint one-hop overlay paths, which greatly reduces the computational complexity of the LP algorithm. Simulations based on a real ISP network and a synthetic Internet topology show that our proposed algorithm can reduce the network congestion ratio dramatically, and achieve high-quality overlay routing service.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.123-130
• /
• 2004

Routing and wavelength assignment(RWA) problem is an important issue in optical transport networks based on wavelength division multiplexing(WDM) technique. It is typically solved using a combination of linear programming and graph coloring, or path selection based graph algorithms. Such methods are either complex or make extensive use of heuristics. In this paper we propose a novel and efficient approach which basically obtains the maximum edge disjoint paths (EDPs) for each source-destination demand pair. And those EDPs obtained are stored in Lookup Table and used for the update of weight matrix. Routes are determined in order by the weight matrix for the demand set. The comprehensive computer simulation shows that the Proposed algorithm uses similar or fewer wavelengths with significantly less execution time than bounded greedy approach (BGA) for EDP which is currently known to be effective in practice.