• 대한환경공학회지
• /
• 제36권10호
• /
• pp.685-690
• /
• 2014

하수처리시설 초과유량에 대한 처리 규제 입법 예고로 인해 강우 월류수 처리에 대한 관심이 증가하고 있다. 본 연구에서는 강우 월류수 염소(차아염소산나트륨) 소독 시 소독제 농도(0.11-4.0 mg $Cl_2/L$), pH (6.5-8.0), 온도($15-25^{\circ}C$), 암모니아 농도(10-41 mg N/L), 부유물질(91-271 mg SS/L)이 대장균군수 감소 속도에 미치는 영향을 고찰하였다. 차아염소산나트륨 농도 효과는 반속도 상수가 1.212mg $Cl_2/L$인 saturation-type model로 잘 모사되었다. 소독 반응 속도는 SS와 pH 증가에 따라 감소되는 반면, 온도에 따라서는 증가하였고, 암모니아 농도에는 영향을 받지 않았다. 월류수 유입 조건을 $1{\times}10^5MPN/mL$, 271 mg SS/L, $15^{\circ}C$, pH 8.0로 가정할 때, 염소 주입 농도 1 mg/L, 수리학적 체류시간 1.25 분인 염소 소독조를 통해 입법예고 된 수질 기준의 1/3 수준인 대장균군수 1,000개/mL를 달성할 수 있을 것으로 계산되어, 염소 소독이 강우 월류수 소독에 유효하게 사용될 수 있을 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3644-3653
• /
• 2011

본 연구는 수처리 주요공정의 소독공정에 대한 자동운전 구축현황과 목표주입율 결정시 체류시간동안 염소 소모량을 분석하고 활용하기 위한 기술을 연구하고 제시하는데 있다. 본 연구를 위하여 자동운전을 위한 시설물 구조 및 하부설비 설치현황을 조사하였으며, 현 시스템의 문제점을 분석하고 해결을 위한 자동운전 프로그램을 개발하여 적용하였으며 이에 따른 효과도 분석 제시하였다. 특히 시지연공정 및 다변수 공정제어에 적합한 모델예측제어 알고리즘을 적용하여 환경인자와 반응시간 등의 상관관계를 분석하고 최적 제어 입력값을 추론할 수 있도록 함으로써 안정적인 공정제어가 가능함을 모델평가를 통하여 확인하였다.

• 한국물환경학회지
• /
• 제20권4호
• /
• pp.376-381
• /
• 2004

The use of electron beam irradiation was investigated to disinfect total coliforms in the secondary sewage treatment effluent. Unchlorinated secondary effluent was irradiated at different dose of 0.2~1.0 kGy by 1 MeV, ELV-4 Model electron beam accelerator. It is interesting to note that a 100 % reduction in total coliforms and total colonies were achieved until a dose of approximately 0.8 kGy. Even at low dose of 0.2 kGy, the total coliforms and total colonies were successfully inactivated to the level of satisfying the new effluent discharge guideline. Besides disinfection of total coliforms, approximately a 50% removal in biochemical oxygen demand was pronounced at a dose of 0.2 kGy. More than 20 % removal in suspended solids and turbidity was also observed at a dose of 1.0 kGy. The application of electron beam irradiation appeared to be one of options to reuse sewage treatment effluent as agricultural or industrial water.

• 대한환경공학회지
• /
• 제29권9호
• /
• pp.1020-1026
• /
• 2007

전 세계적으로 병원성 미생물에 의한 오염과 감염 및 발병의 사례가 급증함에 따라 병원성 미생물을 효율적으로 제어하는 기술에 대한 관심이 매우 증가하고 있다. 병원성 미생물을 환경에서 제어하는 연구는 대다수 수처리 공정과 같이 물에서 이루어지는 소독과 관련되어 진행되어 왔고, 표면에서의 소독에 관련된 연구는 매우 부족하였다. 본 연구는 UV 소독 방법을 표면에 분포된 미생물의 불활성화에 대해서 적용하여 살펴보았고, 소독 모델을 통해서 정량화하였다. 특히, 생물테러용 무기로 잘알려진 탄저균(Bacillus anthracis)의 지표 미생물인 바실러스 포자(Bacillus subtilis spore)에 대해서 UV를 이용한 표면 소독시 매우 빠른 불활성화를 볼 수 있었으며, 2 log(99%) 불활성화를 위한 IT 값은 14.5 $mJ/cm^2$으로 나타났다. UV에 의한 미생물 불활성화는 화학적 소독제의 경우와 달리 온도에 의한 영향은 나타나지 않았으나, 표면 거칠기(surface roughness)에 의한 뚜렷한 tailing off 현상이 나타났다.

• 상하수도학회지
• /
• 제33권4호
• /
• pp.251-258
• /
• 2019

The physical treatment such as chemical precipitation or adsorption was usually added after biological treatment in wastewater treatment process since it was enforced to reduce the concentration of phosphate for wastewater effluent to 0.2 mg/L as P which was well known as one of main nutrient causing eutrophication in waterbody. Therefore, the new material functioned for both adsorption and disinfection was prepared with Fe and Cu, and $TiO_2$, respectively, by changing the ratio of concentration referred to tri-metal (TM). According to SEM-EDS, $TiO_2$ was 30~40% composition for any TM regardless of any synthesis condition. However, the ratio of composition for Fe and Cu was dependent on the initial Fe and Cu concentration, respectively. The removal efficiency of phosphate was obtained to 15% at low initial concentration and the maximum uptake (Q) was calculated to ~11 mg/g through Langmuir isotherm model using TM1 which was synthesized at 1000 mg/L, 1000 mg/L, and 2 g (10 g/L) for $Fe(NO_3)_3$, $Cu(NO_3)_2$, $TiO_2$, respectively. In disinfection test, the efficiency of virus removal using TM was increased with increase of dosage of TM and can be reached 98% at 0.2 g.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.819-826
• /
• 2005

To guarantee the disinfection ability in clearwell, a value of CT is considered where C[mg/l] is disinfectant residual at the exit of clearwell and T[min] means $T_{10}$, the contact time when 10% of tracer is out of clearwell after introducing the tracer at the inlet. To meet a CT value required, increasing the C value is not recommended because high C value can increase potential of producing disinfection by product like THMs. Increasing the hydraulic efficiency surrogated by $T_{10}$ is thus an option widely recommended. Right now, it is widely adopted estimating $T_{10}$ considering LW ratio only due to the suggestions of previous researches. The authors think however there are other factors to consider including shape, flow rate, configuration of inlet and outlet, and the existence of intra basin. This study is initiated to closely look at the effects of two factor on hydraulic efficiency. The factors are shape and inlet flow velocity, i.e., inflow. For that, computational fluid dynamics (CFD) model is developed and pilot test is also carried out. The results show that at a L/W ratio, disinfection ability is overestimated with larger length in shape and higher inlet flow velocity. This suggests that in determining $T_{10}$, the shapes of clearwell and inlet flow velocity should also be considered as well as L/W ratio.

• 한국환경성돌연변이발암원학회지
• /
• 제21권2호
• /
• pp.118-121
• /
• 2001

The predictive screening of various molecular descriptors for predicting carcinogenic, mutagenic, teratogenic and alkylation activity of chlorinated disinfection byproducts (DBPs) has been investigated for the application of quantitative structure-activity relationships (QSAR). The toxicity index for 29 compounds were computed by the PASS program and active values were employed in this study. Studies show that different descriptors account for the model equation of each genotoxic endpoint and that thermodynamic descriptors significantly played a major role on prediction of endpoints of chlorinated aliphatic compounds.

• Preventive Nutrition and Food Science
• /
• 제15권2호
• /
• pp.130-136
• /
• 2010

Norovirus (NV) is becoming a major cause of foodborne illness in many countries. At present, very little is known about the survival of NV in the environment or the disinfection procedures needed to remove NV from contaminated surfaces. Feline calicivirus (FCV, $1{\times}10^{6.75}\;TCID_{50}/mL$) was used as a surrogate model for NV to investigate the effectiveness of sanitizing treatments for the viruses attached to food and food contact surfaces. Ammonium chloride (2%), organic acids (3000 ppm), and ethanol (70%) were most effective, providing $4\;log_{10}$ (99.99%) reductions in FCV titers on food or food contact surfaces. The disinfection efficacies of most agents on ceramic and glass surfaces were greater than stainless steel. The results from this study can be applied in the food industry to reduce NV-associated foodborne illnesses.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.85-92
• /
• 2012

In this study the real situation of apartment house in seoul is reproduced with multi-zone modeling program contam2.4. This model include immune building system(disinfection system) which is consist of dilution, Filter Technology and UVGI(ultra violet germicidal irrdiation). In this study experiments design method used for estimating interaction of HRV air change rate, UVGI air change rate and UVGI grade. Result show that HRV air change rate and UVGI air change rate is most influence factor for remove rate. also Interaction of HRV air change rate and UVGI air change rate is ost influence factor for remove rate.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.249-259
• /
• 1989

Dental impression materials often become contaminated with patients' saliva and blood which creates the potential for cross-infection. It was the purpose of this study to investigate the effects of disinfection of three different rubber impression materials with four different disinfecting solutions. Polysulfide, vinyl polysiloxane and polyether impression materials were mixed according to the manufacturer's directions and samples were formed on a stainless steel model. On removal from the standard model, impressions were immersed in a disinfectant (acid-potentiated glutaraldehyde, phenollic compound, chlorine compound, iodophor) at room tempera tures for ten minutes. After disinfection, the distance between reference points(linear dimension) was measured using the non-contact automatic cordinate measuring projector(MZ-1, Nikon). Through statistical analyses on the data from this study,. the following conclusions were obtained. 1. Polysulfide, vinyl polysiloxane impressions were disinfected without dimensional change.(p>0.05) 2. Polyether impressions which were immersed in acid-potentiated glutaraldehyde were statistically different from control group.(p<0.05) But the amount of shrinkage(0.04%) would not be clinically significant. 3. By immersion of polysulfide, vinyl polysiloxane, polyether impressions in Banicide, Biocide, Multicide plus, sodium hypochlorite for ten minutes, clinically accurate impressions were obtained without dimensional change.