• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.578-583
• /
• 2021

This paper describes acceleration tests for reliability of semiconductors. It also describes AEC-Q100, international test standard for reliability of automotive semiconductors. Semiconductors can be used for dozens of years. So acceleration tests are essential to test potential problems over whole period of product where test time is minimized by applying intensive stresses. AEC-Q100 is a typical acceleration test in automotive semiconductors, and it is designed to find various failures in semiconductors and to analyze their causes of occurance. So it finds many problems in design and fabrication as well as it predicts lifetime and reliability of semiconductors. AEC-Q100 consists of 7 test groups such as accelerated environmental stress tests, accelerated lifetime simulation tests, package assembly integrity tests, die fabrication reliability tests, electrical verification tests, defect screening tests, and cavity package integrity tests. It has 4 grades from grade 0 to grade 3 based on operational temperature. AEC-Q101, Q102, Q103, Q104, and Q200 are applied to discrete semiconductors, optoelectronic semiconductors, sensors, multichip modules, and passive components, respectively.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1018-1033
• /
• 2021

In this study, we aimed to assess the effect of flaking on the nutrient digestibility of corn grain in ruminants. In this regard, in vitro rumen fermentation, in situ rumen degradability, and in vivo metabolic experiments were performed. The automated gas production technique was used for the in vitro fermentation experiments. Six types of corn flakes with various degrees of gelatinization (32%, 41%, 48%, 66%, 86%, and 89%) were ground and incubated in rumen fluid to measure rumen fermentation characteristics and digestion rate. The in situ degradability of ground corn, whole corn, and corn flakes with 62% and 66% gelatinization was measured by incubation in the rumen of two cannulated Holstein cows. In vivo metabolic experiments were performed using 12 crossbred goats (29.8 ± 4.37 kg) using a 3 × 3 Latin square design. The dietary treatments consisted of ground corn and flaked corn with 48% or 62% gelatinization. In vitro experiments showed that as the degree of gelatinization increased, the digestion rate increased linearly, while the discrete lag time decreased linearly (p < 0.05). The effective rumen dry matter degradability, determined by in situ fermentation, was 37%p lower in corn flakes than ground corn, assuming a passage rate of 6%/h (p < 0.01), and there was no difference between the two flakes. In the in vivo experiment, there was no difference in dry matter intake, average daily gain, feed efficiency, and nitrogen utilization among the treatment groups (p > 0.05); however, the crude fat digestibility was lower for corn flakes than for ground corn (p < 0.05). To summarize, the rate of fermentation of corn flakes increased as the degree of gelatinization increased. However, non-ground corn flakes had lower rumen digestibility and did not improve in vivo apparent nutrient digestibility, compared with ground corn. In contrast to the assumption that flaked corn provides more energy to ruminant animals than ground corn, we conclude that the digestibility and energy value of corn flakes are lower than those of ground corn if mastication does not sufficiently reduce the particle size of corn flakes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1495-1504
• /
• 2021

An ultra-compact binary power generation plant converts thermal energy into electric power using temperature difference between heat source and cooling source. In the actual power generation environment, the characteristic value of the plant changes due to any negative effects such as environmental condition or corrosion of related equipment. If the characteristic value of the plant changes, it may lead to unstable output of the turbine in a conventional PID control system with fixed PID parameters. A Neuro PID control system based on Neural Network adaptively to adjust the PID parameters according to the change in the characteristic value of the plant is proposed in this paper. Discrete-time transfer function models to represent the dynamic characteristics near the operating point of the investigated plant are deduced, and a design strategy of the proposed control system is described. The proposed Neuro PID control system is compared with the conventional PID control system, and its effectiveness is demonstrated through the simulation results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.503-510
• /
• 2021

This study intends to apply the mathematical method of fractional order differentiation to a controller that controls the response of the system. Therefore, we design integrator for the fractional index by converting it into discrete time to construct a controller. The IP controller composes an integral controller for errors and the proportional controller applies only the system output. The controller is designed by using the fractional order integrator to the integral controller of the IP controller. First, the performance of the PI controller and the IP controller is compared, and the designed controller is applied to the speed control of the motor. As a result, the motor output speed was uniformed and precise control performance could be obtained. It was confirmed that the speed error in the steady state is within 0.1 [%], and it has precise and uniform speed control performance without overshoot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.167-175
• /
• 2019

Recently, health examination centers have been changing from auxiliary medical facilities to key and independent medical facilities. However, it is not easy to improve medical facilities, including health examination centers, due to the variable characteristics of the relationship between humans and space. Therefore, this study was done to develop a pedestrian-based discrete event simulation analysis program to examine the problems and develop methods for improvement. The program was developed to analyze five evaluation indices and the density of examinees. The problems were derived by analyzing the required time, capacity, and queue size for each examination through simulations. We reduced the examination time and moving distance, increased the capacity, and distributed the queues by adjusting the medical services and relocating the examination rooms. The results were then quantitatively verified by simulations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.29-38
• /
• 2009

In this paper, a high performance pipelined computing design of parallel multiplier-temporal buffer-parallel accumulator is present for the convolution-based non-cascaded architecture aiming at the real time Discrete Wavelet Transform(DWT) processing. The convolved multiplication of DWT would be reduced upto 1/4 by utilizing the filter coefficients symmetry and the up/down sampling; and it could be dealt with 3-5 times faster computation by LUT-based DA multiplication of multiple filter coefficients parallelized for product terms with an image data. Further, the reutilization of computed product terms could be achieved by storing in the temporal buffer, which yields the saving of computation as well as dynamic power by 50%. The convolved product terms of image data and filter coefficients are realigned and stored in the temporal buffer for the accumulated addition. Then, the buffer management of parallel aligned storage is carried out for the high speed sequential retrieval of parallel accumulations. The convolved computation is pipelined with parallel multiplier-temporal buffer-parallel accumulation in which the parallelization of temporal buffer and accumulator is optimize, with respect to the performance of parallel DA multiplier, to improve the pipelining performance. The proposed architecture is back-end designed with 0.18um library, which verifies the 30fps throughput of SVGA(800$\times$600) images at 90MHz.

• Wind and Structures
• /
• v.38 no.1
• /
• pp.15-42
• /
• 2024

A flexible-base coupled-two-beam (CTB) discrete model with equivalent tuned mass dampers is used to assess the effect of soil-structure interaction (SSI) and different types of lateral resisting systems on the design of passive dynamic absorbers (PDAs) under the action of along-wind and across-wind loads due to vortex shedding. A total of five different PDAs are considered in this study: (1) tuned mass damper (TMD), (2) circular tuned sloshing damper (C-TSD), (3) rectangular tuned sloshing damper (R-TSD), (4) two-way liquid damper (TWLD) and (5) pendulum tuned mass damper (PTMD). By modifying the non-dimensional lateral stiffness ratio, the CTB model can consider lateral deformations varying from those of a flexural cantilever beam to those of a shear cantilever beam. The Monte Carlo simulation method was used to generate along-wind and across-wind loads correlated along the height of a real shear wall-frame building, which has similar fundamental periods of vibration and different modes of lateral deformation in the xz and yz planes, respectively. Ambient vibration tests were conducted on the building to identify its real lateral behavior and thus choose the most suitable parameters for the CTB model. Both alongwind and across-wind responses of the 144-meter-tall building were computed considering four soil types (hard rock, dense soil, stiff soil and soft soil) and a single PDA on its top, that is, 96 time-history analyses were carried out to assess the effect of SSI and lateral resisting system on the PDAs design. Based on the parametric analyses, the response significantly increases as the soil flexibility increases for both type of lateral wind loads, particularly for flexural-type deformations. The results show a great effectiveness of PDAs in controlling across-wind peak displacements and both along-wind and across-wind RMS accelerations, on the contrary, PDAs were ineffective in controlling along-wind peak displacements on all soil types and different kind of lateral deformation. Generally speaking, the maximum possible value of the PDA mass efficiency index increases as the soil flexibility increases, on the contrary, it decreases as the non-dimensional lateral stiffness ratio of the building increases; therefore, there is a significant increase of the vibration control effectiveness of PDAs for lateral flexural-type deformations on soft soils.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1043-1052
• /
• 2018

Study Design: Level III retrospective cross-sectional study. Purpose: To define and characterize the presentation, symptom duration, and patient/surgical risk factors associated with 'post-decompressive neuropathy (PDN).' Overview of Literature: PDN is characterized by lower extremity radicular pain that is 'different' from pre-surgical radiculopathy or claudication pain. Although it is a common constellation of postoperative symptoms, PDN is incompletely characterized and poorly understood. We hypothesize that PDN is caused by an intraoperative neuropraxic event and may develop early (within 30 days following the procedure) or late (after 30 days following the procedure) within the postoperative period. Methods: Patients who consented to undergo lumbar laminectomy with or without an instrumented fusion for degenerative lumbar spine disease were followed up prospectively from July 2013 to December 2014. Relevant data were extracted from the charts of the eligible patients. Patient demographics and surgical factors were identified. Patients completed postoperative questionnaires 3 weeks, 3 months, 6 months, and 1 year postoperatively. Questions were designed to characterize the postoperative pain that differed from preoperative pain. A diagnosis of PDN was established if the patient exhibited the following characteristics: pain different from preoperative pain, leg pain worse than back pain, a non-dermatomal pain pattern, and nocturnal pain that often disrupted sleep. A Visual Analog Scale was used to monitor the pain, and patients documented the effectiveness of the prescribed pain management modalities. Patients for whom more than one follow-up survey was missed were excluded from analysis. Results: Of the 164 eligible patients, 118 (72.0%) completed at least one follow-up survey at each time interval. Of these eligible patients, 91 (77.1%) described symptoms consistent with PDN. Additionally, 75 patients (82.4%) described early-onset symptoms, whereas 16 reported symptoms consistent with late-onset PDN. Significantly more female patients reported PDN symptoms (87% vs. 69%, p=0.03). Patients with both early and late development of PDN described their leg pain as an intermittent, constant, burning, sharp/stabbing, or dull ache. Early PDN was categorized more commonly as a dull ache than late-onset PDN (60% vs. 31%, p=0.052); however, the difference did not reach statistical significance. Opioids were significantly more effective for patients with early-onset PDN than for those with late-onset PDN (85% vs. 44%, p=0.001). Gabapentin was most commonly prescribed to patients who cited no resolution of symptoms (70% vs. 31%, p=0.003). Time to symptom resolution ranged from within 1 month to 1 year. Patients' symptoms were considered unresolved if symptoms persisted for more than 1 year postoperatively. In total, 81% of the patients with early-onset PDN reported complete symptom resolution 1 year postoperatively compared with 63% of patients with late-onset PDN (p=0.11). Conclusions: PDN is a discrete postoperative pain phenomenon that occurred in 77% of the patients who underwent lumbar laminectomy with or without instrumented fusion. Attention must be paid to the constellation and natural history of symptoms unique to PDN to effectively manage a self-limiting postoperative issue.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.45-52
• /
• 2018

The virtual reality (VR) cartoon is a format of VR contents that leverage the characteristics of webtoons that provides the simple story line and graphical storytelling tools to strategically surmount limitations of VR contents design. The VR cartoon enables people to experience the imaginary three-dimensional space in the webtoon as a real space by the transformation of webtoon contents through VR prototyping. The VR cartoon successfully presents focused environment where people can readily pay attention to the contents without notable motion sickness. People have been familiar with the storytelling strategy in the context of published cartoons and webtoons, likely we've understood the narrative of a movie through the continuous scenes projected in the screen. Indeed, it has been recognized as a popular toolset of communication, where visual images are sequentially delivered by replacing multiple planar spaces to tell a story narrative. While there are discrete panels with the time and space resolution in the graphical cartoons, people can distill a commit closure based on their past experiences. This is a typical "grammar" of the cartoon, which can be extrapolated to the VR cartoon that provides a seminal storytelling strategy. In this article, we review how the storytelling strategy in webtoons has been transformed into that in VR cartoons, and analyze the key components of VR cartoons. We envision that our research can potentially create keystones to produce variety of new VR contents by reflecting various narrative media including cartoon as a 'sequential art'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.