• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.521-526
• /
• 2015

Research on how to use the biological characteristics of human to confirm the identity of the individual is being actively conducted. Electrocardiogram(: ECG) based biometric system is difficult to counterfeit and does not cause skin irritation on the subject. It can be easily combined with conventional biometrics such as fingerprint and face recognition to give multimodal biometric systems. In this thesis, biometric identification method analysing ECG waveform characteristics from Discrete Wavelet Transform(DWT) coefficients is suggested. Feature selection is performed on the 9 coefficients of DWT using the correlation analysis. The verification is achieved by using the error back propagation neural networks. Using the proposed approach on 24 subjects of MIT-BIH QT Database, 98.88% verification rate has been obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.627-634
• /
• 2007

When a higher-order modulation scheme (16QAM or 64QAM) is applied to the communications system using the nonlinear high power amplifier (HPA), the performance can be degraded by the nonlinear distortion of the HPA. The nonlinear distortion can be compensated by the adaptive nonlinear Volterra equalizer using the low-complexity LMS algorithm at the receiver. However, the LMS algorithm shows very slow convergence performance. So, in this paper, the parallel M-band discrete wavelet transformed LMS algorithm is proposed in order to improve the convergence speed. Throughout the computer simulations, it is shown that the convergence performance of the proposed method is superior to that of the conventional time-domain and transform-domain LMS algorithms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.786-791
• /
• 2011

An optimal feature selection and extraction procedure is an important task that significantly affects the success of brain activity analysis in brain-computer interface (BCI) research area. In this paper, a novel method for extracting the optimal feature from electroencephalogram (EEG) signal is proposed. At first, a student's-t-statistic method is used to normalize and to minimize statistical error between EEG measurements. And, 2D time-frequency data set from the raw EEG signal was extracted using discrete wavelet transform (DWT) as a raw feature, standard deviations and mean of 2D time-frequency matrix were extracted as a optimal EEG feature vector along with other basis feature of sub-band signals. In the experiment, data set 1 of BCI competition IV are used and classification using SVM to prove strength of our new method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.5
• /
• pp.70-77
• /
• 1999

본 논문에서는 Wavelet을 이용한 위장 영상의 질환 부위 특징을 추출하여 질환 부위 패턴을 인식할 수 있는 알고리즘을 제안하였다. 전처리 과정으로서 위장 영상이 형태정보는 입력 영상을 DWT(Discrete wavelet transform)에 의해 4레벨 DWT 계수 행렬을 구하고 계수 행렬의 특징에 따라 저주파 계수 행렬로부터 저주파 특징 파라미터 32개, 수평 고주파 계수 행렬로부터 수평 고주파 특징 파라미터 16개, 수직 고주파 계수 행렬로부터 수직 고주파 특징 파라미터 16개, 그리고, 대각 고주파 계수 행렬로부터 대각 고주파 특징 파라미터 32개 등 모두 96개의 특징 파라미터를 추출한 후 각각의 특징 파라미터를 최대 값+0.5로 최소 값을 -0.5로 정규화 하여 신경회로망의 입력 벡터로 사용하였다. 위장 영상 패턴 인식을 위한 신경회로망은 교사 학습을 요구하는 다층 구조의 오차 역전파(Error back propagation)알고리즘으로 하였고 구조적 특성을 이용하여 입력층, 중간층, 출력층의 계층 구조로 설계하였다. 설계된 신경회로망의 학습은 학습계수를 0.2로 모우멘텀을 0.6으로 설정하여 출력층 최대오차가 0.01보다 작을 때까지 수행하였으며 약 8000회 정도 학습한 결과 설정값 보다 작은 결과를 얻었고 질환의 종류나 위치, 크기에 관계없이 100%의 인식률을 얻었다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.102-111
• /
• 1997

In this paper, a patern recognition method of surface mount device(SMD) IC using wavelet transform and neural network is proposed. We chose the feature parameter according to the characteristics of coefficient matrix which is obtained from four level discrete wavelet transform (DWT). These feature parameters are normalized and then used for the input vector of neural network which is capable of adapting the surroundings such as variation of illumination, arrangement of objects and translation. Experimental results show that when the same form of feature pattern, as is used for learning, is put into neural network and gained 100% rate ofrecognition irrespective of SMD IC kinds, location and variation of illumination. In the case of unused feature pattern for learning, the recognition rate is 85.9% under the similar surroundings, where as an average recognition rate is 96.87% for the case of reregulated value of illumination. Proosed method is relatively simple compared with the traditional space domain method in extracting the feature parameter and is also well suited for recognizing the pattern's class, position and existence. It can also shorten the processing tiem better than method extracting feature parameter with the use of discrete cosine transform(DCT) and adapt the surroundings such as variation of illumination, the arrangement and the translation of SMD IC.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.92-100
• /
• 2011

In this paper, we propose a novel blind digital watermarking method based on a cellular automata transform (CAT). CAT is based on dynamic systems known as cellular automata(CA) and uses transform bases which are differently defined by a rule number, the number of neighbors, the number of cells, and an initial state, etc. The proposed CAT based method is compared with a blind watermarking method based on DWT which is commonly used for a domain transform in signal processing. We analyse properties on changes of DWT coefficients and CAT coefficients under various attacks and determine optimal parameters for a watermarking method robust to attacks. The simulations show that the watermarked images with high PSNR and MSSIM look visually identical to originals and are robust against most of typical image processing attacks. Moreover, the proposed CAT based watermarking method is superior to the DWT based one in robustness to most of typical image processing attacks including JPEG compression, median and average filtering, scaling, cropping, and histogram equalization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.144-146
• /
• 2020

Discrete Wavelet Transform (DWT) is an effective technique that is commonly used for detecting noise in collected data of an individual sensor. In addition, the detection accuracy can be significant improved by exploiting the correlation in the data of neighboring sensors of Wireless Sensor Networks (WSNs). Principal component analysis is the powerful technique to analyze the correlation in the multivariate data. In this paper, we propose a DWT-PCA combination scheme for noise detection (DWT-PCA-ND). Experimental results on a real dataset show a remarkably higher performance of DWT-PCA-ND comparing to conventional PCA scheme in detection of noise that is a popular anomaly in collected data of WSN.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.585-588
• /
• 2018

시계열 데이터의 특징을 추출하여 분석하는 과정에서 시게열 데이터가 가지는 고차원성은 차원의 저주(Course of Dimensionality)로 인해 데이터내의 유효한 정보를 찾는데 어려움을 만든다. 이러한 문제를 해결하기 위해 차원 축소 기법(dimensionality reduction)이 널리 사용되고 있지만, 축소 과정에서 발생하는 정보의 희석으로 인하여 시계열 데이터에 대한 군집화(clustering)등을 수행하는데 있어서 성능의 변화를 가져온다. 본 논문은 이러한 현상을 관찰하기 위해 이산 웨이블릿 변환(Discrete Wavelet Transform:DWT)과 오토 인코더(AutoEncoder)를 차원 축소 기법으로 활용하여 시계열 데이터의 차원을 압축 한 뒤, 압축된 데이터를 K-평균(K-means) 알고리즘에 적용하여 군집화의 효율성을 비교하였다. 성능 비교 결과, DWT는 압축된 차원수 그리고 오토인코더는 시계열 데이터에 대한 충분한 학습이 각각 보장된다면 좋은 군집화 성능을 보이는 것을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2146-2152
• /
• 2008

In In this paper, we proposed a new JPEG2000 codec using multiresolution-based rendering (MRBR) technique for video compression of 3-dimensional digital cinema. We introduced discrete wavelet transform (DWT) for stereoscopic image and stereo matching technique in the wavelet domain. The disparity was extracted using stereo matching and transmitted with the reference (left) image. Since the generated right image was degraded by the occlusion lesion, the residual image which is generated from difference between the original right image and the generated one was transmitted at the same tine. The disparity data was extracted using the dynamic programming method in the disparity domain. There is high correlation between the higher and lower subbands. Therefore we decreased the calculation amount and enhanced accuracy by restricting the search window and applying the disparity information generated from higher subband.

• Structural Engineering and Mechanics
• /
• v.40 no.6
• /
• pp.745-762
• /
• 2011

Damage detection methodologies based on the direct examination of the nonlinear-nonstationary characteristics of the structure dynamic response may play an important role in online structural health monitoring applications. Different signal processing based damage detection methodologies have been proposed based on the uncovering of spikes in the high frequency component of the structural response obtained via Discrete Wavelet transforms, Hilbert-Huang transforms or high pass filtering. The performance of these approaches in systems subjected to different types of excitation is evaluated in this paper. It is found that in the case of random excitations, like earthquake accelerations, the effectiveness of such methodologies is limited. An alternative damage detection approach using the Continuous Wavelet Transform (CWT) is also evaluated to overcome this limitation. Using the CWT has the advantage that the central frequencies at which it operates can be defined by the user while the frequency bands of the detail functions obtained via DWT are predetermined by the sampling period of the signal.