• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.245-252
• /
• 2020

It is very important to evaluate on/off-line stability to operate the power system stably and economically. Until now, we have continuously secured the operation reliability of the power system through the evaluation of transient, voltage and small signal stability. This paper proposes that it is possible to operate in KWAMS by applying the multi-section analysis and subspace methods and verifying the reliability of the algorithms to directly estimate the dominant oscillation mode of the power system from the signal waveform acquired from the phasor measurement units. In addition, this paper shows that the dominant oscillation mode can be detected from real-time measurement data in power systems. Therefore, if we can monitor the state of the power system in real time, it is possible to avoid a large-scale power outage by knowing the possibility of the power system accident in advance.

• Structural Engineering and Mechanics
• /
• v.51 no.4
• /
• pp.685-705
• /
• 2014

This paper presents a new formulation for forward scalar wave simulations in semi-infinite media. Perfectly-Matched-Layers (PMLs) are used as a wave absorbing boundary layer to surround a finite computational domain truncated from the semi-infinite domain. In this work, a hybrid formulation was developed for the simulation of scalar wave motion in two-dimensional PML-truncated domains. In this formulation, displacements and stresses are considered as unknowns in the PML domain, while only displacements are considered to be unknowns in the interior domain. This formulation reduces computational cost compared to fully-mixed formulations. To obtain governing wave equations in the PML region, complex coordinate stretching transformation was introduced to equilibrium, constitutive, and compatibility equations in the frequency domain. Then, equations were converted back to the time-domain using the inverse Fourier transform. The resulting equations are mixed (contain both displacements and stresses), and are coupled with the displacement-only equation in the regular domain. The Newmark method was used for the time integration of the semi-discrete equations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.71-79
• /
• 2010

The algorithm of multiple channel signal processing requires the flexibility of variable frequency band, efficient allocation of transmission power, and flexible frequency band reallocation to satisfy various service types which requires different transmission rates and frequency band. This paper proposes an improved multiple channel signal processing for converting the frequency band of multiple carrier signals efficiently using a window function and DFT in the time domain. In contrast to the previous algorithm of multiple-channel signal processing performing band-pass signal processing in the frequency domain, the proposed algorithm is a method of block signal processing using a window function in the time domain. In addition, the complexity of proposed algorithm of the window function is lower than that of the previous algorithm performing signal processing in the frequency domain, and it performs the frequency band transform efficiently. The computer simulation result shows that the perfect reconstruction of output signal and the flexible frequency band reallocation is performed efficiently by the proposed algorithm.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.693-715
• /
• 2014

Stochastic processes are used to represent phenomena in many diverse fields. Numerical simulation method is widely applied for the solution to stochastic problems of complex structures when alternative analytical methods are not applicable. In some practical applications the stochastic processes show non-Gaussian properties. When the stochastic processes deviate significantly from Gaussian, techniques for their accurate simulation must be available. The various existing simulation methods of non-Gaussian stochastic processes generally can only simulate super-Gaussian stochastic processes with the high-peak characteristics. And these methodologies are usually complicated and time consuming, not sufficiently intuitive. By revealing the inherent coupling effect of the phase and amplitude part of discrete Fourier representation of random time series on the non-Gaussian features (such as skewness and kurtosis) through theoretical analysis and simulation experiments, this paper presents a novel approach for the simulation of non-Gaussian stochastic processes with the prescribed amplitude probability density function (PDF) and power spectral density (PSD) by amplitude modulation and phase reconstruction. As compared to previous spectral representation method using phase modulation to obtain a non-Gaussian amplitude distribution, this non-Gaussian phase reconstruction strategy is more straightforward and efficient, capable of simulating both super-Gaussian and sub-Gaussian stochastic processes. Another attractive feature of the method is that the whole process can be implemented efficiently using the Fast Fourier Transform. Cases studies demonstrate the efficiency and accuracy of the proposed algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.143-148
• /
• 2007

The many studies have been proceeding to express accurately the feature of a sudden signal and a uncertain system in the image processing field. It is well know that Fourier Transform is widely used for frequency analysis of any signal. However, The frequency transform domain is not used for expressing the sudden signal change and non-stationary signal at the time-axis by this method. This paper describes of image analysis by discrete wavelet transform. Wavelet modulus maxima on transformed plane gives the Lipschitz exponent expression, which is useful to examine the characteristics of signal or the edge of an image. It is possible to reconstruct the original image only using the few maxima points. The fractal analysis is applied as an examples. The visualized image of oil flow on a ship model is analyzed. The fractal variable is obtained by the maxima analysis and the good results on the exprement is obtained by the visualized image analysis.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.537-545
• /
• 2018

In this paper, we present a comprehensive analytical study of the symbol error rate (SER) of single-carrier frequency-division multiple access (SC-FDMA) with zero-forcing frequency domain equalization (ZF-FDE) over a Rayleigh fading channel. SC-FDMA is considered as a potential waveform candidate for fifth-generation (5G) radio access networks (RANs). First, the $N_C$ fold convolution of the noise distribution of an orthogonal frequency-division multiplexing (OFDM) system is computed for each value of the signal-to-noise ratio (SNR) in order to determine the noise distribution of the SC-FDMA system. $N_C$ is the number of subcarriers assigned to a user or the size of the discrete Fourier transform (DFT) precoding. Here, we present a simple alternative method of calculating the SER by simplifying the $N_C$ fold convolution using time and amplitude scaling properties. The effects of the $N_C$ fold convolution and SNR over the computation of the SER of the SC-FDMA system has been separated out. As a result, the proposed approach only requires the computation of the $N_C$ fold convolution once, and it is used for different values of SNR to calculate the SER of SC-FDMA systems.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.21-31
• /
• 1994

This paper describes the multichannel combined R2MFC/DTMF/CCT reciver which provides a signaling service functions for call processing control in digital switching system. Using the TMS320C25 DSP chip, we have implemented multi-function receriver shich processes 8 channels of R2MFC, DTMF, and CCT signals simultaneously. In order to increase the channel multiplicity of the combined receiver. R2MFC and CCT receiver were employed by discrete Fourier transform(DFT) method using Goertzel algorithm, and DTMFreceiver was employ by infinite impulse reponse(IIR) filtering method using 4KHz subsampling technique. The combined receiver has 4 function modes for each channel such as R2MFC, DTMF, CCT, and Idle modes. The function mode of each channel may be selected at any time by single-chip micro-controller(.mu.C). Hence, the number of channels assigned for each function mode can be adjusted dynamically according to the signaling traffic variations. From the experimental test results using the test-bed, it has been proved that the combined receiver statisfies all receiver satisfies all receiver specifications, and provides good channel multiplicity and performance, Therefore, it may give a great improvement than existing receiver in cost, reliability, availability, and serviceability.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.577-582
• /
• 2006

본 논문에서는 내용 기반 영상 검색 기술을 이용하여 사용자가 원하는 영상을 쉽게 찾아내고, 이를 자동 재구성함으로써, 영화 미학의 핵심 중 하나인 몽타주 기법을 사용자 중심의 관점에서 구현하고자 한다. 본 논문에서 제안하는 실시간 몽타주 시스템은 이산 푸리에 변환(Discrete Fourier Transform)을 이용해 사용자가 선택한 영상의 특징을 찾고, 유클리디안 거리(Euclidean Distance)를 이용해 데이터베이스에 있는 영상과 유사도를 비교함으로써, 빠르고 효과적으로 사용자가 원하는 영상을 검색할 수 있다. 또한 카메라 트래킹에 의해 실시간으로 사용자의 움직임 영상을 취득하고, 취득된 영상을 검색된 사용자의 영상과 함께 자동 재구성함으로써, 손쉽게 사용자의 의도에 맞춘 영상 재구성을 하게 된다. 본 시스템은 사용자가 일방적으로 영상을 시청, 감상하는 소극적 영상의 소비자에서 벗어나, 기존의 영상을 이용해 임의의 영상을 조합하고 자기 자신의 영상까지 실시간으로 개입할 수 있도록 함으로써, 영상을 새롭게 구성하고 영상 재생산의 적극적 주체가 되는 사용자 중심의 새로운 영화(뉴미디어)의 토대가 될 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.579-580
• /
• 2015

Power frequency is one of important operational parameters evaluating reliability, stability, and measuring efficiency of power. Therefore, an accurate and fast estimate of the power frequency is required. The magnitude gains of cosine and sine filters become different when the power frequency is deviated from the nominal value. The proposed algorithm estimates the power frequency based on this. To demonstrate the performance of the proposed algorithm, RTDS and DSP are used. The simulation results show that the algorithm has not only a high level of robustness but also high measurement accuracy over a wide range of frequency changes. In addition, the algorithm was immune to harmonics and noise.

• Publications of The Korean Astronomical Society
• /
• v.31 no.3
• /
• pp.43-56
• /
• 2016

Through time-series BV CCD photometry of the open cluster NGC 225 region, we have detected 30 variable stars including 22 new ones. They are five ${\delta}$ Scuti-type variable stars, a slowly pulsating B star, six eclipsing binary stars and 18 semi-long periodic or slow irregular variables, respectively. We have performed multiple-frequency analysis to determine pulsation frequencies of the ${\delta}$ Scuti-type stars and a slowly pulsating B star, using the discrete Fourier transform and linear least-square fitting methods. We also have derived the periods and amplitudes of 6 eclipsing binaries and a long-period variable star from the phase fitting method, and presented the light curves of all variable stars. A slowly pulsating B star is a member of NGC 225, but ${\delta}$ Scuti-type stars are not members from the positions in the color-magnitude diagram and the radial distancies from the center of the cluster. From Dias et al. (2014, A&A, 564, 79), only three variable stars including the slowly pulsating B star are members of clusters: two are in NGC 225 and one is in Stock 24. But a variable star in Stock 24 is not a member of the cluster because of its position of color-magnitude diagarm.