• 대한인간공학회지
• /
• 제24권3호
• /
• pp.11-27
• /
• 2005

The objectives of this study are to analyze representative wrist postures while using hand tools and parts at general assembly processes, to evaluate perceived discomfort on the wrist when external loads are present, and to suggest an evaluation and prediction model of perceived discomfort. Sixteen subjects participated in an experiment to appraise perceived discomfort. Three types of the wrist postures with five levels of non-neutralities were analyzed when five levels of external load were applied to each posture. The ANOVA results showed that the perceived discomfort of wrist postures was significantly affected by both the wrist posture and external load (p$<$0.001). It was also shown that some of the interactions between external loads and the wrist postures(Flexion/$Extension^*$Load, Flexion/$Extension^*$supination/pronation, ulnar/radial $deviation^*$supination/pronation) were significant(p$<$0.001). The result implies that a new posture classification scheme for workload assessment methods may be needed to reflect such effects of external load and wrist posture. A regression model of perceived discomfort was developed with respect to wrist posture and external load from the experimental data. A subsequent experiment revealed that the correlation coefficient between the predicted values of perceived discomfort from the model and the actual values obtained from the experiment was about 0.98. It is expected that the results help to properly estimate the body stress resulting from worker's postures and external loads and can be used as a valuable design guideline to analyze potential hazard of musculoskeletal diseases in industry.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.658-664
• /
• 2006

Shock vibrations are usually experienced in vehicles excited by impulsive input, such as bumps. The frequency weighting functions of the current standards in ISO 2631 and BS 6841 are to help objectively predict the amount of discomfort of stationary vibration. This experimental study was designed to develop frequency weighting shape for shock vibration having various fundamental frequencies from 0.5 to 16Hz. The specks were produced from the response of single. degree-of-freedom model to a half-sine force input. Fifteen subjects used the magnitude estimation method to judge the discomfort of vertical shock vibration generated on the rigid seat mounted on the simulator. The magnitudes of the shocks, expressed in terms of both peak-to-peak value and un-weighted vibration dose values (VDVs) , were correlated with magnitude estimates of the discomfort. The frequency weighting shapes from the correlation were developed and investigated having nonlinearity due to the magnitude of the shock.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 2004년도 추계학술대회
• /
• pp.1-1
• /
• 2004

• 동의생리병리학회지
• /
• 제16권2호
• /
• pp.403-407
• /
• 2002

The objective of this study is to establish the new evaluating method of tinnitus and to evaluate the effect of acupuncture therapy. Fourteen patients with tinnitus were studied. The patients answered the questionnaire designed to identify and describe the subjective symptoms of tinnitus and discomfort in daily life due to tinnitus. After acupuncture therapy, the survey was conducted again among the patients and we evaluated the difference between pre-acupuncture therapy and post-acupuncture therapy. 1. Precipitating factors of tinnitus among the patients group consisted of 14 members were stress, noise, drug, overwork, URI, and otitis media in order. 2. Significant improvements in subjective symptoms of tinnitus and discomfort in daily life after acupuncture therapy were identified among the patient group of 14 members 3. Patient group of 14 members were divided into 2 groups by digestion status: patients who have poor digestion and patients who have good digestion. The patients who have good digestion showed significant improvement both in subjective symptoms of tinnitus and in discomfort in daily life after acupuncture therapy. 4. Patient group of 14 members were divided Into 2 groups by urination and defecation status: patients who have poor urination and defecation and patients who have good urination and defecation. The patients who have good urination and defecation showed significant improvement both in subjective symptoms of tinnitus and in discomfort in daily life after acupuncture therapy. 5. Patient group of 14 members were divided into 2 groups by sleeping status: patients who sleep well and patients who don't sleep well. The patients who sleep well showed significant improvement both in subjective symptoms of tinnitus and in discomfort in daily life after acupuncture therapy. This study shows that the subjective symptoms of tinnitus and discomfort in daily life due to tinnitus are involved in urination and defecation factor, sleep factor, and digestion factor. This study also shows that acupuncture therapy is effective in improving the subjective symptoms of tinnitus and discomfort in daily life due to tinnitus.

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.185-190
• /
• 2011

A driver interacts directly with the car seat at all times. There are ergonomic characteristics that have to be followed to produce comfortable seats. However, most of previous researches focused on either static or dynamic condition only. In addition, research on car seat development is critically lacking although Malaysia herself manufactures its own car. Hence, this paper integrates objective measurements and subjective evaluation to predict seat discomfort. The objective measurements consider both static and dynamic conditions. Steven's psychophysics power law has been used in which after expansion; ${\psi}\;=\;a+b{\varphi}_s^{\alpha}+c{\varphi}_v^{\beta}$ where ${\psi}$ is discomfort sensation, ${\varphi}_s^{\alpha}$ is static modality with exponent ${\alpha}$ and ${\varphi}_v^{\beta}$ is dynamic modality with exponent ${\beta}$. The subjects in this study were local and the cars used were Malaysian made compact car. Static objective measurement was the seat pressure distribution measurement. The experiment was carried out on the driver's seat in a real car with the engine turned off. Meanwhile, the dynamic objective measurement was carried out in a moving car on real roads. During pressure distribution and vibration transmissibility experiments, subjects were requested to evaluate their discomfort levels using vehicle seat discomfort survey questionnaire together with body map diagram. From subjective evaluations, seat pressure and vibration dose values exponent for static modality ${\alpha}$ = 1.51 and exponent for dynamic modality ${\beta}$ = 1.24 were produced. The curves produced from the $E_{q.s}$ showed better $R_{-sq}$ values (99%) when both static and dynamic modalities were considered together as compared to Eq. with single modality only (static or dynamic only R-Sq = 95%). In conclusion, car seat discomfort prediction gives better result when seat development considered both static and dynamic modalities; and using ergonomic approach.

• 대한인간공학회지
• /
• 제33권6호
• /
• pp.553-563
• /
• 2014

Objective: The purpose of this study was to evaluate the effect of gender (male, female) and grip spans (45, 50, 60, 70, 80mm) on total grip strength, resultant force, finger force and subjective discomfort rating. Background: In order to prevent musculoskeletal disorders, studies of hand tools need to be preceded based on grip strength, finger force, and subjective discomfort rating. However, experimental apparatus using tools such as pliers that reflect the actual work place was almost non-existent. Method: Fifty-Two (26 males and 26 females) participants were recruited from the student population. In this study, a pair of revised pliers, which can change grip span from 45 to 80mm was applied to estimate total grip strength, resultant force and individual finger forces. All participants were asked to exert a maximum grip force with three repetitions, and to report the subjective discomfort rating for five grip spans of pliers (45, 50, 60, 70, 80mm). Results: There were significant differences of total grip strength, resultant force, individual finger forces and subjective discomfort rating according to grip span. The lowest total grip strength was obtained from the grip span of 80mm for both genders. For resultant force, the highest resultant force was exerted at grip spans of 50, 60 and 70mm for females and 50 and 60mm for males. The lowest subjective discomfort rating was observed in the 50mm for both genders. Conclusion: Based on the result, 50mm and 60mm grip spans which provide the highest force and lowest discomfort rating might be recommendable for the male and female pliers users. Application: The findings of this study can provide guidelines on designing a hand tool to help to reduce hand-related musculoskeletal disorders and obtain better performance.

• 간호행정학회지
• /
• 제3권2호
• /
• pp.81-94
• /
• 1997

Cardiac catheterization has become a routine diagnostic procedure indicated for evaluation of a wide variety of cardiac conditions. Patients are admitted to the coronary care unit after cardiac catheterization. These conscious patients used to report discomfort in the CCU, but no studies have been done to reduce discomfort induced by bed rest, sand bag on the femoral puncture site and restricted mobility for about 20 hours postprocedure. The main objective of thesis is to provide basic data to nursing on interventions which decrease discomfort perceived by patients in the CCU following cardiac catheterization. The subjects were 79 patients following cardiac catheterization who were admitted to the CCU of a general hospital in Inchon. These patients were divided into a massage-applied group, an exercise-applied group and an contrast group. Questionare was prepared by Lee(1995), and tested for content reliability by item analysis : Cron bach's ${\alpha}$ for the instrument measuring discomfort was. 63. The data were collected from January 25 to May 15, 1996. Analysis of data was done by paired t-test, ANOVA ,SNK test, Chi-square test. The results of the study are summarized as follows : 1. There were no significant differences among a massage-applied group, an exercise-applied group and an contrast group according to general information except religion and admission period. 2. There were found no significant differences among the three groups in the results of pretest (The score of the first : 55.5, the second : 54.3 and the last : 51.6), 3. In the degree of discomfort according to general characteristics were found some significant differences for marital status. But there were no significant differences for sex, age, occupation, number of family, religion, educational status and admission period. 4. There was effect on reduced discomfort with massage or exercise following cardiac catheterization.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.90-94
• /
• 1997

Many workers like welders are working in squat sitting postures with te object on the ground for an entire work shift. It is suspected that such prolonged squat sitting without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is to quantitatively evaluate the physical stress caused by the prolonged squat sitting and to recommend a safe work/rest schedule for the task with squat sitting posture based on the lab experiment. In this study, 8 healthy student subjects participated in the experiment. They maintained a squat sitting posture for 16 minutes with 4 different stool height conditions: no stool, 10cm hight, 15cm height, 20cm height. Every 2 minutes, the discomfort was subjectively assessed using the magnitude estimation method for the whole body, lower back, upper leg and lower leg. Based on discomfort rating, we found that 10cm height stool relieved the workload most. Discomfort rating results also indicated that 20cm height stool showed the heghest workload, and that there was no difference in workload between 15cm height and no stool. We recommend to provide the workers with 10cm height stool for prolonged squat sitting tasks.

• 산업경영시스템학회지
• /
• 제24권65호
• /
• pp.31-40
• /
• 2001

We Propose an improved shovel design to minimize physical discomfort and the risk of cumulative trauma disorder at shoveling tasks. The specifications of shovels in Korean standard data were scrutinized to check if they met the anthropometric specification of Korean population in 1997. We also applied "Body Map" pictograph and self-conscious checklist to field survey to analyze the discomfort of shoveling task. Thirty male subjects whose age were ranging from 18 to 65 voluntarily participated in the experiment. The measurement results show that shoveling workers were exposed to hazards of CTD's. Especially, when workers were involved in ditch digging and construction their trunk vend more than 120 degree. In order to compare the new designed shovel and the traditional K.S shovel, an analysis of variance was performed and we obtained very strong evidence that the new designed shovel was better in reducing physical discomfort. According to the results from electromyograrn experiment the new shovel contributed to improving subjective comfort level and reducing low back muscle fatigue. For futher study, the research may be extended to determine the relationship among shovel sharpness, type, digging motion and digging force.ing force.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.95-102
• /
• 2009

Ten young females were participated in this study to investigate the effects of types of shoes (sneakers, high heels, kill heels), types of tasks (standing, walking floor, step up and down), and areas of foot (fore foot, middle foot, rear foot) on foot pressures as well as subjective discomfort ratings. Results showed that kill heels had the most discomfort shoes, followed by high heels and sneakers. Generally, as the heel was higher, the discomfort of foot increased. For the analyses of task types, generally discomfort ratings were highest for the step down and up, followed by walking floor and standing. Especially discomfort ratings of high heels and kill heels were more evident in case of step up and step down than standing and walking floor. Standing task was rated as the lowest levels of discomfort on users' foot. Peak and mean foot pressures were also evaluated in this study. The findings represented that there was no significant differences between types of shoes in both peak and mean foot pressures. The peak pressure (82.14kPa) and mean pressure (40.32kPa) for standing task were significantly lower than those of other tasks [walking floor (190.55kPa, 55.46kPa), step up (191.43kPa, 53.80kPa), and step down (200.66kPa, 52.62kPa)]. Generally discomfort ratings and peak/mean pressures associated with foot showed that fore foot had higher discomfort ratings as well as peak and mean pressures than middle and rear foots. In particularly, this trend was more obvious in case of high heels and kill heels. For the high heels and kill heels, the peak pressures of fore foot were 4.5~4.8 times and 2.3~2.5 times greater than that of middle foot and rear foot, respectively, whereas the peak pressures of fore foot were 2.9 times and 1.7 times greater than that of middle and rear foots, respectively, in case of sneakers.