• Computers and Concrete
• /
• 제29권 6호
• /
• pp.361-374
• /
• 2022

On the premise of ensuring that the automatic and quantitative discharging function of concrete conveyors is met, the accuracy of the weight forecast by the mathematical model of the screw conveying volume is improved, and the error of the weight of the concrete parts and the accumulation thickness is reduced. In this paper, the discrete element method (DEM) is used to simulate the macroscopic flow of concrete. Using the concrete discrete element model, the size of the screw conveyor is set, and establish the response model between the influencing factors (process and structure) and the concrete mass flow rate according to the design points of the screw discharging experiment. The nonlinear data fitting method is used to obtain the volumetric efficiency function under the influence of process and structural factors, and the traditional screw conveying volume model is improved. The mass flow rate of concrete predicted by the improved mathematical model of screw conveying volume is consistent with the test results. The model can accurately describe the conveying process of concrete and achieve the purpose of improving the accuracy of forecasting the weight of discharged concrete.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.529-536
• /
• 2004

Innovated technique to inactivate microorganisms has been developed. This technique uses plasma discharge in 2-phase (Air-Water). Dielectric Barrier (two phase) Discharging system is able to produce new oxidants for microorganisms. Products from discharging are $HNO_2$, $NO_2{^-}$, $HNO_3$, $NO_3{^-}$ and ozone but many other radicals can be generated as well. DBD water has low concentration of ozone (about 0.5mg/L), $NO_2{^-}$, $NO_3{^-}$ (about 10mg-N/L, 20mg-N/L respectively) and lots of $H^+$. These products play an important role in oxidation. Oxidation power by KI titration methods is approximately equivalent to $50mg-O_3/L$. Surprisingly stored DBD water could oxidize KI and maintain stable pH (about pH3) even after several days. Stored DBD water for 5 days has also more than 4log disinfection power to E. coli. However, DBD water cannot be used for drinking water directly due to it's toxicity. Additional process to neutralize pH and decrease toxicity must be applied.

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.625-631
• /
• 2015

이번 연구는 패킹 모듈로 채워진 축열조의 방열 성능을 수치해석 하였다. 해석에는 PCM의 상변화 현상을 계산하기 위해 엔탈피-공극률 방법을 이용하였다. 이 방법을 통해서 방열 시 축열조 상부로부터 열전달유체가 흐를 때 모듈에서의 녹는 현상을 계산하였다. 축열조 디자인에 모듈 배치, 모듈 수 등의 다양한 인자가 있지만, 본 해석에서는 유량의 변화에 따라 나타나는 축열조 출구온도, 전체 PCM의 시간에 따른 녹은 양 및 축열밀도를 확인하였다. 결과적으로 유량이 증가할수록 출구온도가 높게 형성되었으며, 전체 PCM이 녹는데 필요한 시간이 짧아지고 축열 밀도 역시 증가하여 목표치의 93% 수준에 도달하는 것으로 나타났다.

• 한국화재소방학회논문지
• /
• 제34권1호
• /
• pp.66-71
• /
• 2020

리튬-이온 배터리를 폐기하는 방법으로 흔히 사용되고 있는 염수를 이용한 방전 방법은 자칫 화재로 이어질 개연성이 있음에도 불구하고 배터리의 염수 방전 과정의 화재 위험성에 대한 연구는 많지 않다. 본 연구에서는 리튬-이온 배터리 중 휴대폰 배터리를 대상으로 하여 염수에 배터리를 담가 방전 시킬 때 방전특성과 발열에 의한 화재 발생 가능성을 확인하고자 염수농도와 배터리의 개수를 변화시킨 여러 조건에서 실험을 수행하였다. 각 조건에서 방전전압 및 배터리의 발열온도를 측정하여 방전 과정 및 발열에 의한 화재 위험성을 예측하였다. 실험 결과로는, 염수농도가 높을수록 휴대폰 배터리의 방전이 더 잘 되었으며, 발열온도 또한 높게 측정 되었고, 염수에 침수된 배터리 1개의 발열온도보다 중첩된 배터리의 발열온도가 더 높게 측정되었다. 또한, 배터리의 가장 높은 발열이 발생하는 부분은 (+),(-)전극에서 발생하는 것을 알 수 있었다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.1-9
• /
• 2012

This study investigates an application of the Hamming network-dual extended Kalman filter (DEKF) based on pattern recognition for high accuracy state-of-charge (SOC)/capacity estimation and state-of-health (SOH) prediction at various temperatures. The averaged nine discharging/charging voltage-temperature (DCVT) patterns for ten fresh Li-Ion cells at experimental temperatures are measured as representative patterns, together with cell model parameters. Through statistical analysis, the Hamming network is applied to identify the representative pattern that matches most closely with the pattern of an arbitrary cell measured at any temperature. Based on temperature-checking process, model parameters for a representative DCVT pattern can then be applied to estimate SOC/capacity and to predict SOH of an arbitrary cell using the DEKF. This avoids the need for repeated parameter measuremet.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1306-1311
• /
• 2014

In this paper, effect of recharging power by using ESS(Energy Storage System) was investigated when ESS was applied to the train. The recharging power was analyzed and measured. Also, by applying ALVT algorithm, effective recharging and discharging were studied. By using this process, recharging and discharging of the super capacitor were improved which led to enhancing the use of recharging power from the urban Railway vehicles.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.85-88
• /
• 2001

This paper suggests an improved switch architecture for the rechargeable battery protection IC. In the existing protection IC, charging and discharging switches composed of the CMOS transistor and the diode are external components. It is difficult to integrate the switches in a CMOS process due to the large chip-size overhead and inevitable parasitic effects. In this paper, we propose a new switch architecture of the MOSFET's 'diode connection' method. The performance and chip-size overhead are proved to be adequate for the fully integrated protection IC.

• 분석과학
• /
• 제8권4호
• /
• pp.603-610
• /
• 1995

The charge transfer rate in polypyrrole(PPy) electropolymerized within poly(acrylonitrile-co-butadiene)(PAB) was compared with that in PPy deposited Pt electrodes by using cyclic voltammetry, chronoamperometry, and chronopotentiometry in acetonitrile. For both electrodes anodic and cathodic peak currents were proportional to scan rates below 100 mV/sec, but to square root of scan rates beyond 200 mV/sec. The apparent diffusion coefficient of $ClO{_4}^-$ in the PPy/PAB composite is estimated to be 1.6 times larger than that in PPy. The PPy films composited within PAB layer showed higher anodic and cathodic currents and possessed faster charging-discharging process and larger capacity.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.79-83
• /
• 1996

In this study, in attempt to develop a new application technique of discharge plasma, we employed a kind of discharging method called SPCP ( short for Surface discharge induced Plasma Chemical Process). Applications of SPCP have been widely used for years. Compact ozonizers to deodorize household equipments like refrigerators we a part of such applications. We took advantages of the compactness and durability of the SPCP electrode to set up an experimental apparatus for decompositing vapor of aromatic hydrocarbons such as toluene, benzene and xylenes, which are major substances given off In painting or washing processes and aggravate working conditions. Results obtained from this study are summarized as follows. 1) Aromatic hydrocarbon vapors of up to 2,000ppm were almost thoroughly decomposed at the flow rate of 4ℓ/min or lower under the discharge with electric power of 400 Watts. 2) In dry air, as the decomposition progresses, tar-like substance deposits on the discharging areas, which deteriorated the decomposition rate in the end. This substance, however, was almost thoroughly removed by keeping discharge in dry air containing no solvent vapor.