• 설비공학논문집
• /
• 제24권1호
• /
• pp.77-84
• /
• 2012

Numerical performance analysis of the vane-roller integral type swing compressor was conducted. The swing compressor has been investigated for the highly efficient air conditioning system. Performance analysis results of the swing compressor were compared with those of a conventional rotary compressor. Mechanical and gas losses of a swing compressor were larger than those of a rotary compressor. However in case of mass flow rate from the discharge port, the swing compressor was about 6.68% higher than the rotary compressor. Hence the EER, the cooling capacity and the compressor work of the swing compressor were about 3.71%, 6.69% and 2.90% higher than the rotary compressor respectively.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.253-260
• /
• 2013

The importance of environmental protection has been increased recently. Thus the environmental management was settled in an important global competition factor. In the meantime logistics cost occupied the 8.03% of sales at 2011. This portion was greater than the portion of other countries and it was needed the reduction of logistics cost to secure the competition power. As thus in this paper we prepared the process which diminish the environmental discharge and decrease the logistics cost. We proposed the process to apply the MFCA to SCM, until now the MFCA had been used generally in manufacturing process. We defined the loss in SCM and the plus logistic, minus logistic, logistic center and the classification of cost to adopt the MFCA to SCM.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.87.2-87.2
• /
• 2011

1kW급 가정용 연료전지 블로어는 다이어프램방식에 의해 고압 및 일정유량의 가스를 이송시키는 역할을 하고 있다. 본 연구에서는 연료전지 중 연료승압블로어를 대상으로 흡입 및 토출시의 다이어프램 캐비티(Cavity) 내의 공기유동 특성을 수치해석을 적용하여 평가하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.99-107
• /
• 2004

Lubrication characteristics between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump play an important role in volumetric efficiency and durability of pump. In this paper, a finite element method is presented for the computation of the pressure distribution between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump. Also, a Runge-Kutta method is applied to simulate the cylinder block dynamics of three-degrees of freedom motion. From the results of computation, we can draw two major conclusions. One is related to the fluid film characteristics between a cylinder block and a valve plate and the other is related to the average leakage that is determined by the pressure gradient and the clearance near the discharge port. The numerical results of cylinder block dynamics were compared with the experimental results using eddy-current type gap sensors those are fixed at a pump housing.

• Ocean and Polar Research
• /
• 제22권1호
• /
• pp.25-36
• /
• 2000

The polychaeta fauna of the benthos and fouling of the northwestern part of the East Sea was studied during the period of 1971-1998. Three introduced species of polychaetes: Hydorides elegans (Haswell), Polydora limicola Annenkova, and Pseudopotamilla occelata Moore were found. H. elegans was discovered only on the artificial surfaces in Golden Horn Inlet (port Vladivostok), where this species may occur because of hermal pollution due to the discharge of warm waters of the water cooling system of Thermal-Electric Power Station-2 (TEPS-2) in Vladivostok which has been in function since 1971. The abundant population of H. elegans exists in the bay throughout the year and is capable of reproduction. The biomass of H. elegans may reach several $kg/m^2$ in August-September. P. limicola was found at the same time in the fouling of hydrotechnical structures of Vladivostok, Nakhodka, Holmsk and Uglegorsk ports with a biomass of $1-3kg/m^2$. Slow introduction of P. limicola occurs by coastal sail ships at present. The invasion of P. occelata into Peter the Great Bay may be an example of introduction and subsequent naturalization, which produced considerable changes in the structure of benthic communities. The three species of polychaetous sessile organisms and their invasion occurred by ocean and coasters sea-going ships (unintentional transport vectors). H. elegans and P. occelata were most probably transported to the northwestern part of the East Sea from Japan, and P.

• 한국정밀공학회지
• /
• 제33권11호
• /
• pp.927-935
• /
• 2016

A gerotor is suitable for miniature manufacturing because it has a high discharge per cycle and a simple structure, while also being widely used as lubrication oil of engines and the hydraulic source of automatic transmission. In the automobile industry, it has been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency through optimal gerotor design. In this study, to obtain an optimal gerotor with an ellipse-elliptical involute-ellipse combined lobe shape, an automatic program was developed for calculating performance parameters and drawing a gerotor profile. An oil pump was assembled with the optimal gerotor together with the port used at the actual field and CFD analysis was performed on this assembly using Ansys-CFX. A performance test for the oil pump was carried out and showed good agreement with the results obtained from the theoretical analysis and the CFD analysis.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.499-503
• /
• 2016

For safety and economy reasons, hazardous waste including radioactive waste is desired to be converted into stable waste forms with a maximum volume reduction. High temperature melting technology using a plasma torch system can effectively treat even the non-flammable waste as desired. By far, one of the most difficult process for melting the non-flammable waste is a tapping of melts because the melting point of a residual slag in the tapping hole is high and because the viscosity of the melt increases sharply when tapping out. In case of a stationary furnace with a slant tapping port on the side of furnace, a certain amount of melts is left in the tapping hole after tapping out. Because of this, at every end of a melting cycle, the tapping hole needs to be opened by tapping device. The developed tapping device of melts based on both a guide electrode and auxiliary electrode is adequate for the application to discharge of melts except that the consumption of the guide electrode is somewhat faster than expected. Melt is collected in the water cooled vessel.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.85-85
• /
• 2022

The world's most extensive and active deltas, Louisiana's wetlands, are deteriorating rapidly due to multiple stressors such as the discharge of the Mississippi River, sea-level rise, and coastal retreat, the substantial but spatially and temporally variable impacts. However, the ecological and anthropogenic histories, the mode of environmental changes on a multi-millennial timescale have not been thoroughly documented. This study, a palynology-based multiproxy analysis, investigates hydrological, geological, geochemical, and anthropogenic impacts on southern Louisiana wetlands and a variety of external forcing agents influencing ecological succession. Sediment cores extracted from a small pond on a mangrove-dominate island near Port Fourchon, Louisiana, USA yielded a 4,000-year record. The site has been transformed from freshwater to saline water environments, to a mangrove dominant island over the late Holocene. The multivariate principal component analysis identified the relative strength of external drivers responsible for each ecological shift. The Mississippi River delta cycle (lobe switching) was the dominant driver of ecosystem changes during the late Holocene, while relative sea-level rise, tropical cyclones, climate, and anthropogenic effects have been the main drivers late in the site's history.

• 해양환경안전학회지
• /
• 제12권4호
• /
• pp.273-283
• /
• 2006

2004년 강수량이 많았던 8월 목포 주변해역의 8개 지점에서 COD를 조사한 결과, 북항 앞바다에서 6.80 ppm, 영산강 하구둑 부근 해역에서 4.42 ppm, 신안비치 호텔 앞 해역에서 4.60 ppm으로 나타나 해양환경 기준치의 3등급을 초과하고 있었고 나머지 지점에서는 2-3등급 수준을 보였다. 총질소 농도는 1.23-3.56 ppm으로 전 지점에서 3등급 이상이었고, 총인의 농도는 0.07-0.12 ppm으로 2-3등급의 수질을 보였다. 이와 같은 수질은 수산생물의 서식, 양식 및 해수욕 등의 해양레저 활동을 하기에 부적합하며 공업용수와 선박의 정박 등에 이용 할 수 있는 수질 상태를 보였다. 육상으로부터의 목포 내항으로 유입되는 12개 지점의 점원 유입 부하량과 그 기여율을 조사한 결과, 전체 유입양 중 영산강으로부터 유입되는 총질소의 양이 70-93 %, 총인의 유입량도 31-91%를 차지하고 있어 목포 내항의 수질개선을 위해서는 영산강의 수질개선이 급선무이며, 다음으로 북항 하수처리장, 임암천, 남해 하수처리장 순으로 방류수 중의 질소와 인을 우선적으로 제어해야 될 것으로 판단되었다.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.169-178
• /
• 2016

플라즈마토치 용융로에 있어서 내화물의 보수를 최소화하고 용융물의 배출을 원활하게 하기 위해서는 처리대상 폐기물의 물성을 충분히 고려하여야 한다. 원전에서 발생되는 비가연성 방사성폐기물 중 많은 비중을 차지하고 있는 콘크리트 조각, 유리, 모래 등에 대한 화학적 조성비를 조사하여 보면 산성산화물이 염기성산화물에 비해 압도적으로 많은 비중을 차지하고 있으므로 용융 시 염기도가 매우 낮은 산성 슬래그가 된다. 이 용융슬래그는 유동도가 낮아서 용융물의 배출특성이 좋지 않으며 내화물에 침식을 유발시키는 주된 요인이 된다. 경사형 구조의 측면 출탕구를 가진 플라즈마토치 용융로의 경우, 구조상 출탕 후 일정량의 금속성 용융물이 항상 용융로 내부 바닥과 출탕구에 남게 된다. 비중차에 의해 비금속 용융슬래그는 금속성 용융물 상부에 위치하게 되며 혼합형 플라즈마토치를 이행형 운전모드로 가동하게 되면 금속성 용융물과 비금속 용융물이 동시에 용융되므로 비금속 용융슬래그의 온도는 금속 용융온도 이상으로 유지가 된다. 내화물의 수명 향상을 위해 용융로 내부의 온도와 용융물과 접촉하는 부위와 접촉되지 않는 부위를 구별하여 내화물의 특성을 주지하고 가장 적합한 내화물을 부위별로 선정하였다. 산성 내화물과 염기성 내화물이 인접하지 않도록 하고 용융슬래그에 대한 저항성을 높이도록 하였다.