Browse > Article
http://dx.doi.org/10.6110/KJACR.2012.24.1.077

Numerical Performance Analysis of the Swing Compressor  

Moon, Seok-Hwan (Graduate School of Mechanical Engineering, Pusan National University)
Noh, Ki-Youl (Graduate School of Mechanical Engineering, Pusan National University)
Sa, Bum-Dong (AE Laboratory, LG Electronics)
Yang, Jang-Sik (Clean Coal Center, Pusan National University)
Choi, Gyung-Min (School of Mechanical Engineering, Pusan National University)
Kim, Duck-Jool (School of Mechanical Engineering, Pusan National University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.24, no.1, 2012 , pp. 77-84 More about this Journal
Abstract
Numerical performance analysis of the vane-roller integral type swing compressor was conducted. The swing compressor has been investigated for the highly efficient air conditioning system. Performance analysis results of the swing compressor were compared with those of a conventional rotary compressor. Mechanical and gas losses of a swing compressor were larger than those of a rotary compressor. However in case of mass flow rate from the discharge port, the swing compressor was about 6.68% higher than the rotary compressor. Hence the EER, the cooling capacity and the compressor work of the swing compressor were about 3.71%, 6.69% and 2.90% higher than the rotary compressor respectively.
Keywords
Swing compressor; Vane-roller integral type; Cooling capacity; Compressor work; EER;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Lee, T. J., Kim, K. B., Lee, S. W. and Lee, G. H., 2010, Numerical analysis and Experimental result comparison of Variable swash plate compressor, Proceedings of the SAREK Winter Annual Conference, pp. 289-294.
2 Padhy, S. K., 1994, Dynamic Analysis of a Rotary Compressor, Journal of Mechanical Design, Transactions of the ASME, Vol. 116, pp. 639-646.   DOI
3 Park, M. W., 1992, A Study on the Performance of Rotary Compressor with Hydrocarbon Refrigerant Mixtures, MS thesis, Korea University, Seoul, Korea.
4 Kang, T. S., Kim, H. J., Lee, S. J., and Choi, D. H., 1998, Analysis of Frictional Loss for the Rolling Piston Type Rotary Compressor, Proceedings of the KSME Spring Annual Conference A, pp. 678-683.
5 Yanagisawa, T. and Shimizu, T., 1985, Friction losses in rolling piston type rotary compressor. III, International Journal of Refrigeration, Vol. 8, No. 3, pp. 159-165.   DOI   ScienceOn
6 Jun, Y., 2002, Mechanical loss analysis of inverter controlled two cylinder type rotary compressor, Proceedings of International Compressor Engineering Conference at Purdue, pp. C5-6.
7 Kim, H. J., 2002, A study on the Gas Pulsation in a Rotary Compressor, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 14, No. 8, pp. 648-655.
8 Liu, C., Yang, J. and Su, Z., 2001, Numerical analysis of mechanical losses of swing compressor, Imeche Conference Transactions, Vol. 7, pp. 271-278.
9 Tanaka, S., Zuo, S., and Hikam, A., 2008, Measurement of Oil Film Thickness between Bush and Blade in Swing Type Refrigerant Compressor, Transactions of the JSRAE, Vol. 25, No. 4, pp. 375-382.
10 Kim, H. J., Lee, T. J., Park, S. K., and Hwang, I. S., 2001, A Study on the Optimum Design for the Discharge Port of a R410A Rotary Compressor, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 13, No. 12, pp. 1245-1254.
11 Ooi, K. T. and Wonga, T. N., 1997, A computer simulation of a rotary compressor Air-Conditioning and Refrigeration Engineering, Vol. 18, No. 4, pp. 351-358.
12 Ooi, K. T. and Wonga, T. N., 1997, for household refrigerators, Applied Thermal Engineering, Vol. 17, pp. 65-78.   DOI   ScienceOn
13 Jung, H. W., Yoon, W. J., Chung, H. J., and Kim, Y. C., 2010, Experimental study on a refrigeration system with parallel evaporators using R600a, Proceedings of the KSME Spring Annual Conference, pp. 365-370.
14 Cho, I. S. and Jung, J. Y., 2010, Lubrication characteristics of a rotary compressor used for refrigeration and air-conditioning systems, Journal of Mechanical Science and Technology, Vol. 24, No. 4, pp. 851-856.   DOI
15 Lee, S. Y. and Hwang, S. W., 1997, Lubrication Analysis at the Vane and Slot Parts of Rotary Compressors, Proceedings of the Korean Society of Tribologist and Lubrication Engineers, Vol. 25, pp. 136-141.
16 Kim, H. Y. and Kim, H. J., 2008, Analysis of Oil Supply System of a R134a Rotary Vane Compressor, Proceedings of the SAREK Winter Annual Conference, pp. 113-118.
17 Okada, K. and Kuyama, K., 1982, Motion of rolling piston in rotary compressor, Proceedings of the Purdue compressor technology conference.
18 Yanagisawa, T. and Shimizu, T., 1985, Leakage losses with a rolling piston type rotary compressor, I. Radial clearance on the rolling piston, International Journal of Refrigeration, Vol. 8, No. 2, pp. 75-84.   DOI   ScienceOn
19 Rodgers, J. and Nieter, J., 1996, Comprehensive Analysis of Leakage in Rotary Compressor, Proceedings of International Compressor Engineering Conference at Purdue, pp. 287-293.
20 Ooi, K. T., 2008, Assessment of a rotary compressor performance operating at transcritical carbon dioxide cycles, Applied Thermal Engineering, Vol. 28, pp. 1160-1167.   DOI   ScienceOn
21 Kim, H. J., Nam, B. Y. and Lee, G. Y., 2006, Analytical Study on the Performance of a Rotary vane compressor, Korean Journal of
22 Kim, H. J., Kim, W. Y. and Ahn, J. M., 2010, Orbiting compressor for residential air-conditioners, International Journal of Refrigeration, Vol. 33, No. 1, pp. 95-106.   DOI   ScienceOn