• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.91-100
• /
• 2006

In this study, the characterization of unit load generation and discharge from various type stall of piggery was conducted by investigation and analysis of contaminants loading from piggery urine, manure and wastewater. The results are summarized as follows: The unit load generation of filth increases as piggery grow older, but there was not large enough difference among those values of unit load evaluated for various stall types if mean values of each type of stall are considered. The generation amounts of manure and urine were total 4.57kg/head/d of 1.49kg manure/head/d and 3.08kg urine/head/d with consideration of 3 seasons and live weight. The finalized mean unit load generation of filth were estimated at BOD 199.5g/head/d, $COD_{cr}\;413.5g/head/d$, T-N 27.8g/head/d, T-P 5.3g/head/d with consideration of seasons and the type of stalls. The wastewater unit loads discharged from cement type stall were estimated at BOD 31.3g/head/d, $COD_{cr}\;95.6g/head/d$, T-N 8.9g/head/d, T-P가 3.1g/head/d. The sum of manure unit load generation considered with manure collection ratio(80%, 90%) and wastewater unit load was almost similar when compared to the unit load discharged from slurry type stall even though more or less difference were appeared according to each contaminants and parameters.

• Korean Journal of Ecology and Environment
• /
• v.33 no.4 s.92
• /
• pp.342-349
• /
• 2000

This paper demonstrates the influence of intensity of the monsoon on morpho-hydrological fluctuations in Taechung Reservoir during 1993${\sim}$1994. During the study, hydrological variables including rainfall, inflow, and discharge volume showed distinct contrast between 1993 and 1994. Interannaul differences in rainfall occurred during the monsoon in July${\sim}$August monsoon and influenced inflow, discharge, and water residence time (WRT). Total inflow in 1993 was four times greater than that of 1994, and summer inflow in 1993 was 8 times greater than summer 1994. Annual Mean WRT was 93.2 d in 1993 vs. 158.6 d in 1994 and the largest differences occurred between monsoons of 1993 and 1994. Morphometric variables reflected the interannual contrasts of hydrology, so that in 1993 surface area, total volume, shoreline development, and mean depth increased consistently from premonsoon to postmonsoon and over this same period in 1994 they decreased. This outcome indicates that the area of shallow littoral zones in 1993 was greater than in 1994. Also, the drainage area to surface area (D/L) at 80 m MSL was 60.7 which was much greater than values in Soyang and Andong reservoirs and natural lakes world-wide. The morpho-hydrodynamic conditions seemed to influence in-reservoir nutrient concentration which is one of the most important factors regulating the eutrophication processes. I believe, under the maximum hydrodynamic fluctuations in Korean waterbodies during the monsoon, applications of mass balance models to man-made lakes for assessments of external loading should be considered because the models can be used under the seasonally stable inflow and water residence time.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.41-52
• /
• 2012

Suction drain method can directly apply vacuum pressure to the soft ground through vertical drains so it can make hardening zones around them. These hardening zones make steeply lower the discharge efficiency of the pore water with decreasing permeability. This paper considered a stepped vacuum pressure to minimize a hardening zone which is one of the important parameters that can decrease discharge efficiency. A series of laboratory tests were conducted in order to examine the effect of the hardening zones and to evaluate their effects to the ground improvements with varying durations which applied stepped vacuum pressures(-20kPa, -40kPa, -60kPa and -80kPa) with Busan marine clay. According to strength(CPT), water content test and theoretical investigation indicate a size of the hardening zone within 7cm and the decreasing ratio of permeability about 2.0~4.0. Also, the total settlements are larger for the stepped vacuum pressure than the instant vacuum loading. The application time with vacuum pressure is determined considering the geotechnical properties of the interested clays. Results of numerical analysis show that consolidation behavior is appropriate to measurement for considering hardening zones.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.167-192
• /
• 2012

The purpose of the study aims to analyse the judgement criterion of arrived ship under voyage charterparty with the Merida Case. A ship is an arrived ship if she is in port and either able to proceed immediately to a berth or in such a position that she is at the immediate and effective disposition of the chaterparty. Identification of the specified destination-whether berth or port-impacts on the incidence of loss occasioned by delay in loading or discharging, when the delay is due to the place at which the vessel is obliged by the terms of the charterparty to load or discharge her cargo being occupied by other shipping. The Merida case is an appeal by the charterers from a final Arbitration award of two very experienced arbitrators, dated 20th April, 2009. The arbitrators held that a voyage charterparty, dated 5th February, 2007, of the vessel, The M/V Merida, entered into between charterers and the owners, was a port rather than a berth Charterparty. The Primary relevance of this distinction does to the allocation, as between owners and charterers, of the risk of delay caused by congestion at load and discharge ports. The question of law arising in this appeal is whether the arbitrators were right to conclude that the charterparty was a port and not a berth charterparty. The arbitrators additionary placed some reliance on a post-contractual e-mail from the agents, which suggested that charterers did not dispute the validity of the NOR-and, hence, that this was a port charterparty.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3835-3850
• /
• 2024

The high-temperature gas-cooled reactor (HTGR) with spherical fuel elements contains complex pebble flow. The flow behavior of pebbles is influenced by various factors, such as pebble density, friction coefficient, wall structure, and discharge port size. Using a GPU-DEM numerical model, the effects of the friction coefficient on the cyclic loading and unloading of pebbles in the full-scale HTR-PM are studied. Numerical simulations with up to 420,000 spherical pebbles are conducted. Four sets of friction coefficient values are determined for comparative analysis based on experimental measurements. Discharging speed, residence time, stress, porosity, and velocity distribution are quantitatively analyzed. In addition, a comparison with the CT-PFD experiment is carried out to validate the numerical model. The results show that near-wall retention phenomena are observed in the reactor core only when using large friction coefficients. However, using friction coefficient values closer to the measured experimental values, the pebble bed in HTR-PM exhibited good flow characteristics. Furthermore, the friction coefficient also influences the porosity and velocity distribution of the pebble bed, with lower friction coefficients resulting in lower overall stress in the bed. The discharge outlet's influence varies with different friction coefficient values. In summary, this study demonstrates that the value of the friction coefficient has a complex influence on the pebble flow in HTR-PM, which provides important insights for future numerical and experimental studies in this field.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.187-193
• /
• 2011

The stormwater runoff from road or expressway is known as one of important nonpoint pollution sources. To reduce the pollutants discharge from road or expressway, many best management practices(BMPs) have been applied and planned. Among the BMPs, road sweeping can be effective way to prevent pollutant washoff to environment. This study is performed to evaluate the characteristics of particles collected from the road by sweeping car. Size distribution and pollutant concentration of particles were analyzed. Based on the pollutant concentration and the specification of road such as length, width, and unit for pollutant generation, total amount of pollutant to be removed by road sweeping was estimated. Most of sediments collected by road sweeping was classified into sandy soil and fraction of fine grained soil was low. Although the concentrations of pollutants such as heavy metals in road sediments did not exceed the soil contamination criteria, washout of pollutants during sweeping work by spraying water might cause leaching of pollutants contained in sediments and thus resulted in low pollutant concentrations. Reduced amounts of pollutant by road sweeping showed 31.4% TSS reduction for ${\bigcirc}{\bigcirc}$ region and 7.7% TSS for ${\triangle}{\triangle}$ region. Other pollutants showed low reduction rate, because of their leaching by water spraying. Results from this study indicate that detailed and well-planned investigation for the road sweeping is necessary for the accurate estimation of pollutant reduction from road or expressway.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.329-334
• /
• 1998

This study was conducted in order to investigate removal rate of organic matter, nitrogen and phosphorus to reduce environmental polluation with treatment to attach combined septic tank to 3 stage soil filter after mixing anaerobic treated water of livestock wastewater and low concentrated wastewater generated in farm house. Because anaerobic filter bed was packed in combined septic tank and a microorganism was accumulated in combined septic tank with increasing hydraulic retention time(HRT), if HRT $4{\sim}12day$, CODcr was removed $63.4{\sim}84.0%$. Also, $NH_4\;^+-N$ and $PO_4\;^{3-}-P$ were removed $3.9{\sim}5.4%$ and $18.3{\sim}29.0%$, respectively. In being re-treated by 3 stage soil filter, although hydraulic loading rate was gradually increased, CODcr, $NH_4\;^+-N$ and $PO_4\;^{3-}-P$ were removed above 90% due to filtration, adsorption, ion exchange, and action of soil microorganism. Generally, the attached treatment of combined septic tank and 3 stage soil filter did suitably treat livestock wastewater to water standard of discharge applied from '96 year, in view of decreasing pollution loading amount and recycling of agricultural water.

• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.205-212
• /
• 2004

Phosphorus cycle was studied in a deep stratified reservoir in summer monsoon area (Lake Soyang, Korea) by surveying phosphorus input from the watershed and the movement of phosphorus within the reservoir. And the spatial and temporal distribution of phosphorus was modeled with a 2-dimensional water quality model (CE-QUAL-W2), Phosphorus loading was calculated by measuring TP in the main inflowing river (the Soyang River) accounting for 90% of watershed discharge. TP of the Soyang River showed a large daily variation with the flow rate. High phosphorus loading occurred during a few episodic storm runoff laden with suspended sediments and phosphorus. Because storm runoff water on rainy days have lower temperature, it plunges into a depth of same temperature (usually below 20m depth), forming an intermediate turbidity layer with a thickness of 20 ${\sim}$ 30 m. Because of stable thermal stratification in summer the intermediate layer water of high phosphorus content was discharged from the dam through a mid-depth outlet without diffusing into epilimnion. The movement of runoff water within the reservoir, and the subsequent distribution of phosphorus were well simulated by the water quality model showing a good accuracy. The major parameter for the calibration of phosphorus cycle was a settling velocity of detritus, which was calibrated to be 0.75 m ${\cdot}$ $day^{-1}$. It is concluded that the model can be a good simulator of limnological phenomena in reservoirs of summer monsoon area.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.389-409
• /
• 2012

The Switched Bill of Lading(SBL) has been in frequent use in recent years as intermediary trade increases with the growing number of companies' overseas subsidiaries. Its frequent use, though, has brought about disputes regarding its illegal issue. Although there are several legal cases regarding this, studies on this issue are hard to find. Therefore, this study tries to provide countermeasures and precautions against unlawful issues of SBL through examining the legal cases resulting from illegal issuing practices of SBL. When the Switched Bill of Lading is issued, the shipper, consignee, port of loading and unloading, and shipping date of the original bill of lading are usually changed. Statements which may put the shipper at a disadvantageous position may also be deleted and/or the bill of lading may be either divided or integrated when it is issued. However, if the carrier issues the SBL 1)without withdrawing original BL, 2)indicating the shipping date, port of loading and port of discharge falsely, or 3)deleting the statements which may give him disadvantages, it may be regarded as an illegal issue. These unlawful issues of SBL may pose a huge threat to the shipper, banks and the parties relating to the trade. That is, the shipper may take a substantial loss when the goods can be delivered to a third party by SBL without his collecting the proceeds. The issuing bank and the negotiating bank may also have their security rights to the goods hampered by the illegal and improper issue of SBL. In most cases, the carrier has no choice but to issue the SBL without collecting the original BL for fear of hurting the relationship with the intermediary traders. This practice of issuing more than two sets of BL may pose a potential risk to the carrier.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.322-333
• /
• 2005

Total phosphorus (TP) and suspended solids (SS) were measured in the discharge waters from 5 drainage basins of Lake Yongdam, from April, 2002 till March, 2004. The responses of SS and TP to rainfall were analyzed and their loadings into Lake Yongdam were calculated. The inflowing rivers into Lake Yongdam were the Juja River, the Jeongja River, the Jinan River, the Geum River and the Guryang River. Among these rivers Jinan River showed the highest TP that fluctuated very much according to the flow rate. TP and the flow rates (Q) of each river showed positive correlations with empirical relationsip of $TP\;=\;6.32Q^{0.30}$ for the Juia River, $TP\;=\;8.58Q^{0.49}$ for the Jeongia River, $TP\;=\;307.92Q^{0.10}$, for the Jinan River, $TP\;=\;17.91Q^{0.47}$, for the Geum River, $TP\;=\;20.11Q^{0.53}$ for Guryang River. In April 2002 ${\sim}$ March 2003, phosphorus loadings from the Juja River, the Jeongja River, the Jinan River, the Geum River and the Guryang River were calculated to be 3,677, 11,430, 36,412, 89,651, and 42,226 kgP ${\cdot}$ $yr^{-1}$ respectively. And the specific loadings from the Juja River, the Jeongia River, the Jinan River, the Geum River and the Guryang River were calculated to be 0.3, 2.9, 13.6, 9.3, and 13.0 kgP ${\cdot}$ $km^{-2}$ ${\cdot}$ $yr^{-1}$ respectively. In April 2002 ${\sim}$ March 2004, the suspended particles loading from the Juja River, the Jeongia River, the Jinan River, the Geum River and the Guryang River were 673, 1,232, 4,232, 30,902, 80,202 ton ${\cdot}$ $yr^{-1}$ respectively. The Guryang River showed the largest contribution of SS loading.