• 한국수자원학회논문집
• /
• 제39권1호
• /
• pp.35-46
• /
• 2006

본 연구에서는 안전하고 원활한 용수공급을 목적으로 하는 상수도관망시스템의 오염예방 및 위험관리를 위한 통합의사결정시스템의 기본구조를 제시하고 유럽과 미국에서 널리 사용되고 있는 다기준 의사결정기법인 PROMETHEE와 ANP를 적용해 상수도관망의 이상징후 판정을 위한 위험요소들의 우선순위를 평가하였다. 문제 구성을 위하여 pH 잔류염소농도, 유량, 수압, 전기전도도, 탁도, 블록누수량, 수온을 자료항목으로 선정하였고 관부식, 관파열, 관내수질오염을 평가기준으로 하여 PROMETHEE와 ANP의 결과를 비교 분석하였다. 본 연구에서 제시한 상수도관망의 위험요소 평가결과는 위기상황 대처방안시스템 구축시 사고대응 제어알고리즘 설계의 기초자료가 될 수 있을 것이다.

• 한국지리정보학회지
• /
• 제11권1호
• /
• pp.45-57
• /
• 2008

본 연구는 환경지리정보시스템을 활용한 활용하여 수질오염방지시설의 입지 결정요인을 분석하여 적정입지를 선정하는 방안을 제시하고자 한다. 이를 위해 수질오염총량제가 가장 먼저 실시된 낙동강 권역을 대상으로 환경지리정보시스템을 구축한 후 1) 수질오염방지시설의 처리용량에 영향을 미치는 오염원, 2) 수질오염방지시설의 입지와 오염원 배출량간의 관계를 분석하여 향후 어떤 오염방지시설을 어디에 입지시킬 것인가에 대한 정책대안을 제시하였다. 분석결과, 1) 수질오염방지시설의 처리용량 결정에 가장 큰 영향을 주는 오염원은 산업폐수발생량으로 판명되었으며, 2) 수질오염방지시설의 입지에 가장 큰 영향을 미치는 오염원은 산업체의 수로 나타났다. 이에 반해 인구수는 환경시설입지를 제한하는 효과가 있는 것으로 판명되었다. 또한, 경상북도 낙동강 중 상류 유역의 경우 주 오염원인 축산오염원에 대한 대처가 가장 미흡한 것으로 나타나 앞으로 축산오염원의 처리가 가장 시급한 것으로 판단된다. 본 연구는 장차 수질오염방지시설의 입지를 선정하는데 활용될 수 있을 것이며, 각 지역의 오염 특성에 따라 수질오염방지시설을 입지를 결정하는데 크게 기여할 수 있을 것으로 기대된다.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.23-32
• /
• 1992

Surface treatment and chemiluminescence characteristics of the polymer film. It was studied that the Intensities and rates of treatments are in proportional to condition of the treatment, considering the results of study on treatments to polymer film with discharge and ultraviolet irradiation through the methods such as surface resistance, contact angle, dyeing method, solace ten-sion and so on. It was also studied that the said has a nice correlation with the concerned result studied by chemiluminescence. Since the chemiluminescence will enable the Investigators to grasp a eertain condition caused by quitely slight deterioration with high sensitivity, it can be also used as a way for getting an information regarding the decision for degradation-condition and life-estimating of insulation material basically related to some security matters as well as surface condition of treatments through the above method.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.148-154
• /
• 2007

In this paper, characteristics of ignition voltage and current by wire length of HID(High Intensity Discharge) lamp circuit are analyzed. In the construction field, decision of the wire thickness for HID lamp circuit has the problems, and these are presented. Through transmit parameters, equivalent model of the ballast and HID lamp circuit was derived. The graph of voltage reduction about length between the ballast and the lamp is shown. The simulation of proposed model and experimental results are presented in order to validate the proposed method. The proposed model and graph can use to choose the proper length of wire between the ballast and the lamp in the field.

• 상하수도학회지
• /
• 제13권2호
• /
• pp.95-104
• /
• 1999

A simulation of water hammer, introduced by abruptly varied motion of a pumping machine, was performed at a one of typical pumping station in Korea. Impact of hydraulic structure such as check valve, pressure relief valve and air valve in mitigating water hammer effect was estimated gradually. Method of characteristic was employed for the effective calculation of discharge and head. The relationship between various hydraulic structures and flow was properly integrated on the base of the method of characteristic. The methodology in this approach can provide significant contribution in decision making procedure for the design of hydraulic structure at a typical pumping station in Korea.

• 산업기술연구
• /
• 제26권B호
• /
• pp.43-51
• /
• 2006

Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

• 품질경영학회지
• /
• 제38권4호
• /
• pp.580-586
• /
• 2010

Performance variations in mixture products such as medicine, food, and chemicals can be caused by their own subcomponents. For instance, a discharge capacity of a lithium-ion battery depends upon the mixture ratio of ethylene, dimethyle, and ethyle-methyle, all of which are subcomponents of an electrolyte solution in the battery. Thus it is crucial to determine tolerances of the mixture ratio in order to maintain the product quality at a desired level. This paper is concerned with the tolerance design of the mixture ratio. In particular, minimizing variance around the mixture ratio is adopted as a decision criterion in this paper. An illustrative example with multiple quality characteristics is given as well.

• 한국임상수의학회지
• /
• 제21권1호
• /
• pp.58-61
• /
• 2004

A 5-year old female shih-tzu referred to the veterinary Teaching Hospital, College of Veterinary Medicine, Konkuk University. The patient was presented with a mass of ventral to pubic region and intraperineal region. CBC, chemistry, x-ray, fine needle aspiration, biopsy and MRI was performed. The dog was definitively diagnosed as lipoma based on cytologic and histopathologic examination. In order to remove the mass, an approach with two direction was made. First, intraperineal region was removed about 40%, and then ventral to pubic was removed the remainder. And inserted penrose drain for obliterate dead space to prevent the accumulation of serous discharge. The dog is clinically normal and being monitored for development of any abnormal signs for the time being. In this case, diagnostic MRI was very useful procedure. it revealed accurate location of a lipoma and useful manner for decision of surgical approach to remove.

• 환경영향평가
• /
• 제8권1호
• /
• pp.133-139
• /
• 1999

Community residents are tend to evade waste treatment facilities such as waste landfills, waste incinerators. Therefore, decision-makers of waste management are concerned about the reduction and recycling of food garbage. As a treatment alternative of food garbage which consists of 30% of municipal waste, producing compost and feed stuff from food garbage is environmentally amenable. In considering the characteristics of food garbage are putrid and high moisturized, methods of landfilling and incineration for food garbage are environmentally inadequate. For the institutionalization of food garbage recycling, separate discharge, establishment of collection system, securing of market for compost and feed stuff manufactured from food garbage, and tax and financial incentives for food garbage recycling facilities are necessary.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.533-541
• /
• 2014

The streams in Jeju Island have very distinctive hydrological and geological properties and there are a lot of limits in applying the general flood estimation method. This study presented parameters dominant in the Hancheon stream of Jeju Island by analyzing the sensitivity of parameters of HEC-HMS model regarding rainfall events in the target basin, and extracted the optimal parameter(Time of Concentration of Clark Unit Hydrograph: Kraven II method, Storage Coefficient: Sabol method) by analyzing and comparing it with the flood runoff data observed in the site and Jeju Island's observation data.