• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.35-46
• /
• 2006

In this study, we proposed a layout of the integrated decision support system in order to prevent the contamination and to manage risk in water supply networks for safe and smooth water supply. We evaluated the priority of risk factors to detect anomaly in water supply networks using PROMETHEE and ANP techniques, which are applied to various Multi-Criteria Decision Making area in Europe and America. To develop the model, we selected pH, residual chlorine concentration, discharge, hydraulic pressure, electrical conductivity, turbidity, block leakage and water temperature as the key data item. We also chose pipe corrosion, pipe burst and water pollution in pipe as the criteria and then we present the results of PROMETHEE and ANP analysis. The evaluation results of the priority of risk factors in water supply networks will provide basic data to establish a contingency plan for accidents so that we can establish the specific emergency response procedures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.45-57
• /
• 2008

The purpose of this research is to select an appropriate location of water pollution prevention facilities(WPPF) through evaluating location decision factor using environmental geographic information system. To do that, this research reviewed the current location policies of WPPFs and its related researches. And this paper builds water pollutant statistical databases, integrated them with the geographic information system of the administrative areas where water pollutants are generated, and gears it with statistical programs such as correlation and regression analysis in order to figure out the pollution factors which influence on the location decision of WPPF on the real time base. The volume of discharge of industrial wastewater is one of the most important water pollutants on the location decision of WPPF. And the number of industrial facilities also was the most important location decision factor in constructing the WPPFs. In addition, this paper noted that the number of population in each area makes a role to restraint the construction of WPPF. It identified that the disposal facility in Nackdong river upper-middle watersheds was insufficient in treating the livestock pollutants. Therefore, Gyeongbuk should concentrate on the construction of disposal facilities of livestock pollutant in these areas. The results of this research will contribute to decide what kinds of WPPF should be constructed on which watershed in Nackdong River, and to forecast the future water quality of each watershed.

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.23-32
• /
• 1992

Surface treatment and chemiluminescence characteristics of the polymer film. It was studied that the Intensities and rates of treatments are in proportional to condition of the treatment, considering the results of study on treatments to polymer film with discharge and ultraviolet irradiation through the methods such as surface resistance, contact angle, dyeing method, solace ten-sion and so on. It was also studied that the said has a nice correlation with the concerned result studied by chemiluminescence. Since the chemiluminescence will enable the Investigators to grasp a eertain condition caused by quitely slight deterioration with high sensitivity, it can be also used as a way for getting an information regarding the decision for degradation-condition and life-estimating of insulation material basically related to some security matters as well as surface condition of treatments through the above method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.148-154
• /
• 2007

In this paper, characteristics of ignition voltage and current by wire length of HID(High Intensity Discharge) lamp circuit are analyzed. In the construction field, decision of the wire thickness for HID lamp circuit has the problems, and these are presented. Through transmit parameters, equivalent model of the ballast and HID lamp circuit was derived. The graph of voltage reduction about length between the ballast and the lamp is shown. The simulation of proposed model and experimental results are presented in order to validate the proposed method. The proposed model and graph can use to choose the proper length of wire between the ballast and the lamp in the field.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.95-104
• /
• 1999

A simulation of water hammer, introduced by abruptly varied motion of a pumping machine, was performed at a one of typical pumping station in Korea. Impact of hydraulic structure such as check valve, pressure relief valve and air valve in mitigating water hammer effect was estimated gradually. Method of characteristic was employed for the effective calculation of discharge and head. The relationship between various hydraulic structures and flow was properly integrated on the base of the method of characteristic. The methodology in this approach can provide significant contribution in decision making procedure for the design of hydraulic structure at a typical pumping station in Korea.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.43-51
• /
• 2006

Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.580-586
• /
• 2010

Performance variations in mixture products such as medicine, food, and chemicals can be caused by their own subcomponents. For instance, a discharge capacity of a lithium-ion battery depends upon the mixture ratio of ethylene, dimethyle, and ethyle-methyle, all of which are subcomponents of an electrolyte solution in the battery. Thus it is crucial to determine tolerances of the mixture ratio in order to maintain the product quality at a desired level. This paper is concerned with the tolerance design of the mixture ratio. In particular, minimizing variance around the mixture ratio is adopted as a decision criterion in this paper. An illustrative example with multiple quality characteristics is given as well.

• Journal of Veterinary Clinics
• /
• v.21 no.1
• /
• pp.58-61
• /
• 2004

A 5-year old female shih-tzu referred to the veterinary Teaching Hospital, College of Veterinary Medicine, Konkuk University. The patient was presented with a mass of ventral to pubic region and intraperineal region. CBC, chemistry, x-ray, fine needle aspiration, biopsy and MRI was performed. The dog was definitively diagnosed as lipoma based on cytologic and histopathologic examination. In order to remove the mass, an approach with two direction was made. First, intraperineal region was removed about 40%, and then ventral to pubic was removed the remainder. And inserted penrose drain for obliterate dead space to prevent the accumulation of serous discharge. The dog is clinically normal and being monitored for development of any abnormal signs for the time being. In this case, diagnostic MRI was very useful procedure. it revealed accurate location of a lipoma and useful manner for decision of surgical approach to remove.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.133-139
• /
• 1999

Community residents are tend to evade waste treatment facilities such as waste landfills, waste incinerators. Therefore, decision-makers of waste management are concerned about the reduction and recycling of food garbage. As a treatment alternative of food garbage which consists of 30% of municipal waste, producing compost and feed stuff from food garbage is environmentally amenable. In considering the characteristics of food garbage are putrid and high moisturized, methods of landfilling and incineration for food garbage are environmentally inadequate. For the institutionalization of food garbage recycling, separate discharge, establishment of collection system, securing of market for compost and feed stuff manufactured from food garbage, and tax and financial incentives for food garbage recycling facilities are necessary.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.533-541
• /
• 2014

The streams in Jeju Island have very distinctive hydrological and geological properties and there are a lot of limits in applying the general flood estimation method. This study presented parameters dominant in the Hancheon stream of Jeju Island by analyzing the sensitivity of parameters of HEC-HMS model regarding rainfall events in the target basin, and extracted the optimal parameter(Time of Concentration of Clark Unit Hydrograph: Kraven II method, Storage Coefficient: Sabol method) by analyzing and comparing it with the flood runoff data observed in the site and Jeju Island's observation data.