• 대한의생명과학회지
• /
• 제26권4호
• /
• pp.383-388
• /
• 2020

Ingestion of food contaminated with microorganism, if not always, could lead to severe health problem. Preservatives has been added to food to prevent food from being contaminated with microorganism. But, these have potential to threaten the health. Therefore, much effort has been taken to find the safe materials showing the anti-microbial activity. In this study, we investigated the anti-bacterial activity of Oenothera lamarckiana aerial part extract against eight bacteria strain. In paper disc assay, extract inhibited the growth of Staphylococcus aureus, Methicillin-resistant S. aureus, Bacillus cereus and Shigella dysenteriae at 200 μg/disc, but not against Escherichia coli, E. coli O157:H7, Salmonella Typhi and S. enteritidis. Minimum inhibitory concentration (MIC) against Staphylococcus aureus, Methicillin-resistant S. aureus, Bacillus cereus and Shigella dysenteriae is 250, 250, 500 and 500 μg/mL, respectively. Compared with reported MIC of other plant resources, O. lamarckiana aerial part extract showed the relatively high anti-bacterial activity. O. lamarckiana aerial part could be suitable for the preservative development. But, it still remains to be studied to evaluate safety and so on.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.141-152
• /
• 2017

The lumbar disc is one of the first parts of the human body to age. Female discs start to age at twenty and completely age between fifty and sixty. The number of lumbar herniated intervertebral disc patients is increasing rapidly; however, studies on protective inner wear are insufficient. This study develops protective inner wear equipment for bodies. The following were the study methods and procedures. First, the protective design, pattern and making of the inner wear were based on the analysis of collected data. Second, one subject was selected, then human body parts were measured to create the inner protective pattern. The inner pattern was made by the basic size of the subject. The inner protective equipment was made for lumbar disc disease patients after a wearing test and after correcting the pattern. Third, inner protective equipment was thoroughly tested to verify the compatibility of lumbar pads. The following were the study results and observations. First, lumbar pads who had inner protection were easily worn and the design was very ladyish in contrast to other lumbar pads on the market. Second, the pattern was completed by referring to, Lee Hyoung Sook's, torso and her lumbar pad shape. The fabric was mesh (for good ventilation) and poly spandex (for elasticity). Third, lumbar inner protective equipment was verified through a subject assessment and a major assessment. This study showed high scores on appearance and functional satisfaction versus existing disc lumbar pads in the market. This study predicts that new waist protective inner wear can help the female patient's health and social life because it has great functionality and can maintain outer line patterns.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.36-42
• /
• 2022

Globally, as population growth and economic development continue, resource consumption is increasing rapidly. As an alternative to electric vehicles was suggested as the environmental pollution problem emerged, the number of registered electric vehicles in Korea increased by more than 137 times compared to 2013. Secondary batteries are expected to expand into various markets such as small IT devices and electric vehicles, and the most important part of electric vehicles is the battery (secondary battery). Therefore, in this study, to analyze the stability of the CSM (Classifier Separator Mill) grinding disc that crushes secondary battery raw materials, structural analysis and vibration analysis of the 1st to 4th grinding discs and the final model were performed. The change of bending by the weight of the Grinding Disc is at least 0.065㎛ and maximum 0.075㎛, and the change by the standard gravity is judged to be very low. The strain is at least 0.00031㎛/㎛ and maximum 0.00078㎛/㎛, and even if the number of Hamer increases, the change by the weight is judged to be insignificant. When the Grinding Disc rotates at a maximum of 6000rpm, the deformation and deformation rate of the first to third models are similar, but the fourth model (Hamer 10EA) is more than three times and the final model (Hamer 12EA) is about four times. However, the maximum deformation is 28.21㎛, which is considered to be insignificant when the change is 6000rpm. Six modes of natural Frequency analysis of the 1st~4th order and final model of the grinding disc appeared to be bent or twisted.

• 대한수학회보
• /
• 제34권1호
• /
• pp.29-34
• /
• 1997

Let $U = {z \in C : $\mid$z$\mid$ < 1}$ be the open unit disc in the complex plane and let N be the class of all analytic functions p in U with p(0) = 1.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.223-228
• /
• 2006

Brake judder of an automotive vehicle is defined as an abnormal vibration of low frequency during braking. Under the assumption that judder occurs due to disc run-out and is a resonance phenomenon with a specific parts of the automobile, computational simulations using SAMCEF software were performed in this paper. The results show that the stabilizer of the car is a possible part which makes the judder vibration due to resonance. And initial braking velocity, the magnitude of run-out, and the friction coefficient between disk and pad are the influential factors to the brake judder.

• 자동차안전학회지
• /
• 제8권3호
• /
• pp.28-32
• /
• 2016

Braking system is directly related to the safety of a vehicle and the brake discs are essential part of the braking system. Due to the repeated frictional forces and torque during braking, brake discs are always works at high temperature and high pressure. Furthermore, the brake disc is one of major tuning components in aftermarket, the braking performance of the brake disc should be evaluated for establishing the certification standards of tuning components. This paper proposes the test method to evaluate the performance of tuning brake discs.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1073-1081
• /
• 2017

Inductive dynamic drives (IDD) are ultra rapid actuators where the moving part (disc) is subjected to impulse force. This paper presents the second model of inductive dynamic drive - a mechanical model where analytic- numerical approach was applied. The magnetic pressure, which was determined on the basis of the results obtained in the electrodynamic model, becomes the input data for mechanical model. Research with application of the mechanical model is necessary in order to determine the proper disc oscillation frequency and to obtain the stress state control for drive elements to be designed. Also, the selection of drive parameters to keep the disc deformation insignificant (while oscillating) is a condition under which these models do not need to be coupled together.

• 풍력에너지저널
• /
• 제10권4호
• /
• pp.20-27
• /
• 2019

High-speed shaft coupling in a wind power system transmits power and absorbs variations in length and spindle dislocation between the gearbox and generator. Furthermore, the coupling has an insulation function that prevents electrical corrosion caused by the flow of the generator's current into the gearbox and prevents overload resulting from sudden power failure from being transferred to the gearbox. Its design, functions, and part verification are described in the IEC61400 and GL Guidelines, which specify that the part must have a durability life of 20 years or longer under distance variation and axial misalignment between the gearbox and the generator. This study presents the design of a high-speed coupling through composite stiffness calculation, structural analysis, and comparative analysis of test and theory to identify the characteristics of high-speed coupling for a large-capacity 6 MW wind power generator. A prototype was fabricated by optimizing the manufacturing process for each part based on the design, and the reliability of the fabricated prototype was verified by evaluating the performance of the target quantitative evaluation items.

• 한국식생활문화학회지
• /
• 제16권3호
• /
• pp.243-249
• /
• 2001

Antibacterial activities in each part of watercress(Oenanthe javanica D.C.) grown under different culture conditions were measured to determine the possibility to use watercress as a resource to develop the antibacterial substance. The leaves of watercress were extracted with methanol and the methanol extract was further fractionated with various organic solvents. Antibacterial activities against Shigella dysenteriae ATCC 9361 in all fractions were determined according to the agar diffusion method using paper disc. Methanol extract of watercress leaves was more effectively inhibited the growth of the tested bacteria than the extracts of roots or stems at the concentration of 0.5 g eq./disc, and the extract of watercress from Hwasoon was the most effective one as compared to others. Phenolic and neutral fractions fractionated from methanol extract of watercress had a considerable inhibiting activity on the growth of the bacteria, but acidic and basic fractions did not show any inhibitory effect. Minimum inhibitory concentrations of phenolic and neutral fractions against Shigella dysenteriae ATCC 9361 were $400\;{\mu}g/disc$ and $550\;{\mu}g/disc$, respectively.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.83-88
• /
• 2000

multi-beam optical drive is a method to improve the data transfer rate for the optical disc systems by parallel recording and reading on neighboring multi-tracks. In this paper, the beam rotating actuator, which is necessary for the multi-bean optical disc drive to from beam spots on multi-tracks simultaneously, has been developed. The Voice Coil Motor is used as a drive mechanism for high resolution and small size of the actuator. And rotating guide based on link structure is designed for frictionless and axisless rotation of rotating part including dove prism and for rotating in axis of geometric center of dove prism. The characteristics of the actuator are experimented by laser vibrometer, Polytec OFV1102 and a dynamic analyzer, HP35670A. It shows that the actuator has good linearity, rotating range $\pm0.34^\circ$, minimum rotating angle $0.0066^\circ$and natural frequency 113.9Hz. Therefore the actuator can be applied in a multi-beam optical disc system.