• Korean Journal of Metals and Materials
• /
• v.47 no.10
• /
• pp.667-674
• /
• 2009

High temperature wear of STD 61 tool steels sliding against the Al-9%Si coated steels used for hot press forming has been studied in comparison with that of the tool steels sliding against the uncoated steels. Wear tests have been performed using a pin-on-disc configuration under an applied normal load of 50N for 20 min with heating the coated and uncoated steels up to 800$^{\circ}C$. It was found on the worn surface of the STD 61 tool steels sliding against the Al-9%Si coated steels that the formation of the glazed layers containing Al transferred from the coated tribopair may contribute to a reduction of the coefficient of friction, and detachment in part occur due to delamination wear, resulting in higher specific wear rate. On the other hand the Fe-oxide wear debris entrapped on the softer surface of the uncoated steels can act as a tribosurface, leading to decreased adhesive wear of the STD 61 tool steels, resulting in a lower specific wear rate.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.56.2-56.2
• /
• 2021

Constraining the structure and thus the fate of giant molecular clouds (GMCs), the primary sites of star formation in galaxies, is crucial to understand the evolution of galaxies themselves. Exploiting the unprecedented sensitivity and angular resolution of the Atacama Large Millimeter/sub-millimeter Array (ALMA), we have measured the spatially-resolved (~ 20 pc resolution) properties of the GMCs in two nearby late-type galaxies, NGC 5806 (SAB(s)b) and NGC 6753 ((R)SA(r)b), as part of the WISDOM project. Although these results are preliminary, we identified ~ 200 resolved GMCs in NGC 5806 within a radius of 500 pc, most within a nuclear ring structure, and ~ 400 resolved GMCs in NGC 6753 within a radius of 2 kpc, most within a flocculent spiral structure. The GMCs of NGC 5806 have similar sizes but slightly higher linewidths than clouds in the Milky Way disc. Because the GMCs also have higher surface densities, the calculated cloud Virial parameters are nevertheless about unity, suggesting that the GMCs of NGC 5806 are in gravitational equilibrium and thus long lived. This is contrary to other WISDOM results on earlier-type galaxies, where large cloud linewidths are likely due to shear associated with the local (circular) orbital motions (rather than the clouds' self-gravity), and the clouds are either marginally or not gravitationally bound. These results support the notion that spheroids alter the dynamical states of clouds (morphological quenching), that are otherwise (i.e. in galaxy discs) fairly homogenous and similar to those of the Milky Way.

• Korean Journal of Plant Resources
• /
• v.31 no.5
• /
• pp.423-432
• /
• 2018

This study was performed to develop a new natural antimicrobial materials by analyzing the effect of extracts obtained from Ten Lauraceae Species on the inhibitory activity against Propionibacterium acnes. The plant materials were collected from Wando and Jeju islands, and the antimicrobial activity of the crude extracts was examined by the agar diffusion method with different part (i.e., leaf and branch), solvents (i.e., distilled water, 80% ethanol, and 100% methanol) and at different ultrasonic extracting times (i.e., 15, 30, and 45 minutes). The control agents used were synthetic antimicrobials, methylparaben and phenoxyethanol, at concentrations of 0.4, 1, 2, and 4 mg/disc. Altogether, extracts of 10 species used in the study showed inhibitory activity, which confirmed their antimicrobial action against acnes. Among these, leaves of Laurus nobilis L. which was extracted in 80% ethanol for 45 min showed the largest clear zone (19.8 mm). Leaves of L. nobilis L., showing highest antimicrobial activities among 10 species, were successively reextracted with n-hexane, chloroform, ethylacetate and n-butanol. As a results, in all fractions except butanol, clear zone above 10 mm were formed. The ethyl acetate fraction showed the highest inhibitory activity (13.3 mm) and the inhibitory activity was significantly higher than that of crude extract (10.2 mm) and phenoxyethanol as a control (12.5 mm).

• Microbiology and Biotechnology Letters
• /
• v.38 no.2
• /
• pp.190-197
• /
• 2010

To develop the safe and natural antimicrobial agents, the 68 ethanol extracts from the 61 different kinds of oriental herbal medicine were prepared and their antimicrobial activities were evaluated. The herbal medicine used were from China (46 kinds), South Korea (14 kinds), North Korea (5 kinds) and Vietnam (3 kinds), respectively, and the root (27 species) was popular part in this study. The average water content and extraction ratio for ethanol were 7.10% and 6.75%, respectively. Determination of antimicrobial activity by disc-diffusion assay at 0.5 mg/disc concentration showed that the extract of Angelica tenuissima Nakai (china), Illicium verum, Junci medulla, Rhus javanica L., Salvia miltiorrhiza Bunge and Syzygium aromaticum has strong antimicrobial activities against different food spoilage and pathogenic bacteria and fungi. Determination of MIC and MBC/MFC further showed that the extract of Syzygium aromaticum has MIC of 1.25 mg/mL and MBC/MFC of 1.25~5.00 mg/mL against Listeria monocytogenes, Bacillus subtilis, Staphylococcus epidermidis, Staphylococcus aureus, Salmonella typhimurium, Proteus vulgaris, Escherichia coli, Pseudomonas aeruginosa, Candida albicans and Saccharomyces cerevisiae. And, the extract of Junci medulla, Rhus javanica L. and Salvia miltiorrhiza Bunge showed strong antibacterial activities with MIC of 0.08~0.63 mg/mL and MBC/MFC of 0.08~2.50 mg/mL against the tested bacteria except E. coli and P. aeruginosa. In a while, the results of hemolytic activity of 68 different herbal extracts against human red blood cells showed that the extract of Angelica tenuissima Nakai has hemolytic activity at 0.5 mg/mL concentration. Therefore, Illicium verum, Junci medulla, Rhus javanica L., Salvia miltiorrhiza Bunge and Syzygium aromaticum were finally selected for natural antimicrobial resources. Further research on active substances and the mode of action of the selected herbal medicine is necessary.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.134-141
• /
• 2010

This study analyzed the regional morphological and mechanical characteristics of vertebrae by using micro-computed tomography (micro-CT) and micro finite element analysis (FEA). For the present study, the $12^{th}$ human thoracic vertebral bones (an 85-years female and a 48-years male) were used. These were scanned by using micro-CT. Structural parameters were evaluated from the acquired 20 image data for fifteen $4{\times}4mm^2$ regions (five regions in respective layers of superior, middle and inferior part) in the thoracic vertebral trabecular bones. $4{\times}4{\times}4mm^3$ cubic finite element models of each regions were created at $70{\mu}m$ voxel resolution to investigate effective modulus ($E^+$). The present study indicated that there were significant differences in morphological and elastic mechanical characteristics of each region. There are close relationship between effective modulus and structural model index (SMI) in the bone of the 48-years male and between effective modulus and bone volume fraction (BV/TV) in the bone of the 85-years female. In addition, the effective modulus of central regions is about 80% stiffer than that of lateral regions at transverse plane. These findings may be likely to explain the previous result that a change of loading distribution of the vertebral trabecular bones is caused by spinal curvature and nucleus pulpous degeneration of the intervertebral disc.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.209-213
• /
• 2020

In this study, the model A with the existing shape used at racing car and the model B with light weight were designed. The structural analysis with thermal deformation and stress were carried out. Model A shows that the maximum temperature is lower than model B. The cooling performance due to the shape of the disk without any other cooling conditions can be shown to be better for model A. Model A was seen to be superior in durability as the thermal stress reduced by almost twice as much as model B. The part where the greatest stress occurred appeared to be the hole jointed with the hub regardless of its shape. The analysis results at this study are seen to be useful at designing the shape of the actual vehicle brake disc. The analysis results obtained in this study can be applied at grasping the strength of the brake disk for racing car practically. By utilizing the analysis result of the brake disk for racing car, this study is seen as the convergence study that the aesthetic design and analysis are applied.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.104-109
• /
• 1998

Methanol extracts from 84 Indian plant samples (50 species in 31 families) and 27 African plant samples (20 species in 12 families) in vitro were tested for their growth-inhibitory activities against Bifidobacterium bifidum, Bifidobacterium longum, Lactobacillus acidophilus, Clostridium perfringens, and Escherichia coli, using a paper disc agar diffusion method under $O_2-free$ conditions. The responses varied with bacterial strain, plant species and plant part. Extracts from Cymbopogon citratus whole plants, Ocimum basilicum whole plant, Madhuca indica flowers, and Aegle marmelos leaves among Indian plant samples moderately or strongly inhibited the growth of Cl, perfringens whereas moderate growth-inhibitory activity against E. coli was obtained from extract of Indian O. basilicum whole plants. These plant extracts did not affect the growth of the lactic acid forming bacteria tested. These results may be an indication of at least one of the pharmacological actions of these tropical plants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.597-606
• /
• 1999

This study was performed to evaluate the effect of aging and thermal cycling on the biaxial flexure strength of low commercially available veneering resin composites for crown(Dentacolor : DC, Artglass : AG, Esternia : ET and Targis : TG). Disc specimens were fabricated in a teflon mold giving 12mm in diameter and 1mm in thickness. All samples were divided into 4 groups. Group 1 was dried in a dessicator at $25^{\circ}C$ for 30 days. Group 2 was immersed in distilled water at $37^{\circ}C$ for 30 days. Group 3 was immersed in distilled water at $65^{\circ}C$ for 30 days. Group 4 was subjected to 10,000 thermal cycles between $5^{\circ}C\;and\;55^{\circ}C$, and the immersion time in each bath was 15 seconds per cycle. Biaxial flexure test was conducted using the ball-on-three-ball method at the cross head speed of 0.5mm/min and fracture surfaces were observed with scanning electoron microscope. The results obtained were summarized as follows; 1. Weibull modulus values, except for the AG group, decreased after thermal cycling treatment. 2. Biaxial flexure strength values of aging group at $37^{\circ}C$ were the lowest in all sample groups. Except for the DC group, strength values were significantly decreased for the drying group. 3. After thermal cycling test, the highest value of biaxial flexure strength of 188.8 MPa was observed in the ET group and the lowest value of 73.2 MPa was observed in the DC group. The strength values showed the significant differences in each group (p<0.05). 4. Observation of surfaces after thermal cycling test revealed the ditching in the part of surrounding large fillers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.487-494
• /
• 2011

The safety valve used in LNG/LNG-FPSO ships plays an important role in maintaining a fixed level of pressure by emitting LNG gas out of the pipes in the LNG piping system. The discharge coefficient is regarded as the most important factor in the valve performance. To satisfy the ship's classification, the discharge coefficient of the safety valve must usually be over 0.8. Despite the importance of understanding the flow phenomena inside the safety valve, the valve design is usually based on experience and experiments. We carried out a computational fluid dynamics (CFD) investigation using the ANSYS-CFX software. We observed the flow phenomena inside the valve and measured the discharge coefficients according to changes in the valve lift, which is the distance between the exit of the nozzle and the lower part of the disc plate. We verified our CFD results for the discharge coefficients using available experimental data.

• Parasites, Hosts and Diseases
• /
• v.55 no.5
• /
• pp.575-578
• /
• 2017

Aspidogastrid trematodes (Subclass Aspidogastrea) are a relatively small group with a characteristic adhesive disc and parasitize in a variety of cold-blooded hosts. Until now, only 2 species in the genus Cotylaspis, i.e., C. coreensis and C. sinensis, have been reported as the aspidogastrid trematode in the Republic of Korea (=Korea). In the present study, we intended to describe a species of aspidogastrids collected from the small intestine of the common carp, Cyprinus carpio, in a faunistic point of view. Total 51 specimens were collected from a carp caught in Nakdong-gang (River) on May 2015. Some of them were prepared as the specimens for light microscopic observations, and some others were prepared for SEM. They were slightly elongated without head lobes, $2,432{\times}840{\mu}m$ in average size, and had characteristic adhesive discs with 4 rows and 46 alveoli in average. The ovary was reniform and was located in the posterior-upper part of the body. The single testis was larger than the ovary and was located below the ovary. The uterus was coiled containing numerous eggs and distributed in the posterior 2/3 of the body. The vitellaria were follicular, and distributed from the mid-level of testis to near the posterior end. The morphological characters with dimensions of our specimens were closely identical with those of Aspidogaster ijimai previously described. A new aspidogastrid is added among the Korean trematode fauna by the present study.