• Fire Science and Engineering
• /
• v.29 no.3
• /
• pp.13-20
• /
• 2015

As building height is increased, more careful decisions about the required safe egress time is needed for evacuation. This study analyzed the influence of three training sessions on the vertical speed of evacuation in the high rise building. Evacuation experiments were done in a high-rise office building in Seoul, and we analyzed the vertical evacuation speed as a function of density using a camera. Controlled and uncontrolled total evacuation were compared using the Pathfinder simulation. The process of repeated training, changed the specific stair utilization rate from 6.3% to 39.5%. The vertical evacuation speed as a function of density was analyzed using the equation s = 1.004 ? 0.288D, which is very similar to the equation used in a different study. The total evacuation time of the special controlled total evacuation was reduced by about 25% compared to the simultaneous evacuation.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.77-83
• /
• 2021

The purpose of the study is to evaluate the effect on medical application and convergence for the efficient disaster responses in the massive radiological events by comparison of two types of survey-meters(hand held survey-meter and transportable portal monitor). In the simulated radiation disaster drill, twelve participants randomly wore a personal protective equipments (PPE) with twelve check source. We measured participants to detect five real radioactive sources of the twelve check sources, using two types of survey meters. The primary outcome was the measuring time. The secondary outcome was the sensitivity and specificity of the detection of the real radioactive source. The average time by the hand held survey meter was 231.9 ± 116.6 seconds, and the time by transportable portal monitor was statistically shorter 8.690 ± 1.667 seconds. There was no difference in the sensitivity and specificity between two survey meters. The transportable portal monitor survey meter was considered to have medical application and play an important role in radiological disasters.

• Strategy21
• /
• s.36
• /
• pp.94-120
• /
• 2015

The Asia-Pacific Region has emerged as a arena of geopolitical competition between the U.S. and China. The Obama administration of the U.S. had laid out the concept of rebalancing strategy toward the region, concentrating its 60 percent of Naval Forces to the region till 2020 and consolidating its network of allies and partners. Whereas Chinese leader Xi Jinping also put forward the concept of new type of major power relations concerning its relations with the U.S. and a concept of 'the Asian Community of Common Destiny' aiming at a more intensified mutual relation among countries in the region. In doing so, Asia-Pacific region gradually became the arena where mutual competition and cooperation between the U.S. and China has crossfired. As a close ally to the U.S. and a partner to Japan, South Korea should develop trilateral naval cooperation by holding joint naval drill with the aim of humanitarian support and disaster relief. At the same time, Seoul also should make efforts to proceed mutual confidence building with Beijing by deepening military-to-military cooperation. These policy options will be helpful to enhance Seoul's security posture in the region.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.321-328
• /
• 2004

The purpose of this study is to describe 3-Dimensional technique to obtain spatial information automatically using PhotoModeler Pro. PhotoModeler Pro is excellent software with the three-dimensional measurement function used by a personal computer using Windows operating system However, it is not sufficient to carry out the automatic matching work with two stereo images. This is very large neck as a 3-D measurement software. In this study, the automatic stereo matching work using the self-making program and DDE interface within PhotoModeler Pro was tried. The experiment field is the hillside and stair zone of Tateyama region, Nagasaki City. The results of automatic stereo matching work were very good with $100\%$ hitting ratio of target.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.267-275
• /
• 2020

Purpose: In this study, GPR exploration equipment, spray vehicles and flow meters, core drill, borehole image processing system(BIPS), 3D cavity imagery equipment, and cavity formatting equipment were used to identify this cavity growth process. Method: A certain amount of water was injected in proportion to the mass of the cavity, and the cavity was observed to expand as the injected water was drained out. The cavity rating change was evaluated by quantitatively evaluating the expansion factors and the speed of growth. Results: According to the results of examining the volume change through injection time - injection flow rate - volume increase for the four experimenters, the volume increase decreased as the injection time increased, and there was no further increase in volume if injected for one hour or so. Conclusion: In addition, the injection test analyzed the volumetric variation to determine whether the cause of the cavity occurrence was the effect of the underground burial in the vicinity of the cavity. Therefore, it was found that the cavity expansion is caused by the repetition of the relaxation soil collapse due to the groundwater flow and the loss of the collapsed soil below the cavity.

• Journal of Radiation Protection and Research
• /
• v.46 no.2
• /
• pp.66-79
• /
• 2021

Background: The Japan Atomic Energy Agency (JAEA) is specified in the Disaster Counter-measures Basic Act as a designated public corporation for dealing with nuclear disasters. Materials and Methods: The Nuclear Emergency Assistance and Training Center (NEAT) was established in 2002 as the activity base providing technical assistance to both national and local governments during nuclear emergencies. The NEAT has a robust structure and utilities and special installations, and it organizes training and exercises. Results and Discussion: Due to an offshore earthquake that caused a devastating tsunami in March 2011, a nuclear accident occurred at the Tokyo Electric Power Company's Fukushima Daiichi Nuclear Power Station. The NEAT responded by conducting off-site environmental radiation monitoring and contamination screening, dispatching special vehicles, offering telephone consultations, and calculating the dispersion of radioactive materials. An examination of the emergency response activities revealed that the organization was prepared for these types of disasters and was able to plan long-term response. Conclusion: As a designated public corporation, the JAEA technically supports the national government, the Fukushima prefectural government, and the Ibaraki prefectural government, all of which responded to the off-site emergencies resulting from the March 2011 Fukushima Daiichi accident

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2013

The slime, deposited in the bored pile due to falling soil particle, reduces the bearing capacity of bored pile and thus the stability of construction also decreases. The weight pendulum and iron have been used for estimating the slime thickness based on the subjective judgment and thus the previous method has a limitation of reliability. The objective of this paper is to suggest the method for estimating the slime thickness by using characteristics of electrical resistivity as scientific method. The temperature-compensation resistivity probe (TRP), which has a conical shape and the diameter of 35.7mm, is applied to the measurement of the electrical resistivity in the borehole during penetration. The field tests are carried out for estimating the slime thickness in the application site of bored pile. The slime thickness is calculated through the difference between excavation depth of borehole and measured data. Furthermore, the laboratory tests are also conducted for investigating effects of casing, time elapsing and relative density by using the specimen of slime. The laboratory test supporting the suggested method is reasonable for determining the slime depth. The paper suggests that the electrical resistivity method may be a useful method for detecting slime thickness and the method is expected to be applicable to various sites of bored piles.