• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.743-754
• /
• 1997

A three-dimensional constitutive modeling for reinforced concrete is presented for finite element nonlinear analysis of reinforced concrete. The targets of interest to the authors are columns confined by lateral steel hoops, RC thin shells subjected to combined in-plane and out-of-plane actions and massive structures of three-dimensional (3D) extent in shear. The elasto-plastic and continuum fracture law is applied to pre-cracked solid concrete. For post cracking formulation, fixed multi-directional smeared crack model is adopted for RC domains of 3D geometry subjected to monotonic and reversed cyclic actions. The authors propose a new scheme of decomposing stress strain fields into sub-planes on which 2D constitutive laws can be applied. The proposed model for 3D reinforced concrete is experimentally verified in both member and structural levels under cyclic actions.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.544-551
• /
• 2011

This paper presents the circuit arrangement and effective control method of regenerative energy storage system for an electric vehicle using super-capacitors as the braking energy storage element. A bi-directional controlled current flow of the DC-DC converters with the capacitor bank is connected in parallel with battery, and is controlled so that the whole of the braking energy is effectively absorbed into the capacitors and released back to the electric motor upon acceleration. The converter needs the series-parallel switching circuit for making the best use of the series capacitors and for limiting the step-up ratio of the boost converter. The proposed methods are verified by computer simulation and experimental set-up. They are usefully applied to the electric vehicles such as green cars, electric motorcycles, bike, etc which are power- supplied by the electric batteries.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.469-474
• /
• 2005

The most recent trend on digital hearing aid is to increase the ratio of signal to noise by directivity or to develop noise reduction algorithm inside DSP IC chip. This paper designed, fabricated and tested a digital hearing aid directivity testing device in which a micro-mouse-1ike the stepping motor with a speaker rotates around an examinant. Both ears of the examinant were fixed with ITE hearing aids in order to response to receiving sound. The experimental results were compared with a boundary element method program for verification. The diameter of the directivity testing device was 2 [m] and the micro-mouse was precisely controlled by PICBASIC micro processor.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.291-306
• /
• 2021

Based on Reissner's mixed variational theorem (RMVT), the authors develop a semi-analytical finite element (FE) method for a three-dimensional (3D) bending analysis of nonhomogeneous orthotropic, complete and incomplete toroidal shells subjected to uniformly-distributed loads. In this formulation, the toroidal shell is divided into several finite annular prisms (FAPs) with quadrilateral cross-sections, where trigonometric functions and serendipity polynomials are used to interpolate the circumferential direction and meridian-radial surface variations in the primary field variables of each individual prism, respectively. The material properties of the toroidal shell are considered to be nonhomogeneous orthotropic over the meridianradial surface, such that homogeneous isotropic toroidal shells, laminated cross-ply toroidal shells, and single- and bi-directional functionally graded toroidal shells can be included as special cases in this work. Implementation of the current FAP methods shows that their solutions converge rapidly, and the convergent FAP solutions closely agree with the 3D elasticity solutions available in the literature.

• Nonlinear Functional Analysis and Applications
• /
• 제27권2호
• /
• pp.433-448
• /
• 2022

The Cartan's second curvature tensor Pⁱ_jkh is a positively homogeneous of degree-1 in yⁱ, where yⁱ represent a directional coordinate for the line element in Finsler space. In this paper, we discuss the decomposition of Cartan's second curvature tensor Pⁱ_jkh in two spaces, a generalized 𝔅P-recurrent space and generalized 𝔅P-birecurrent space. We obtain different tensors which satisfy the recurrence and birecurrence property under the decomposition. Also, we prove the decomposition for different tensors are non-vanishing. As an illustration of the applicability of the obtained results, we finish this work with some illustrative examples.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.261-270
• /
• 2024

This paper proposes an effective method for optimizing the structure of functionally graded isotropic and incompressible linear elastic materials. The main emphasis is on utilizing a specialized polytopal composite finite element (PCE) technique capable of handling a broad range of materials, addressing common volumetric locking issues found in nearly incompressible substances. Additionally, it employs a continuum model for bi-directional functionally graded (BFG) material properties, amalgamating these aspects into a unified property function. This study thus provides an innovative approach that tackles diverse material challenges, accommodating various elemental shapes like triangles, quadrilaterals, and polygons across compressible and nearly incompressible material properties. The paper thoroughly details the mathematical formulations for optimizing the topology of BFG structures with various materials. Finally, it showcases the effectiveness and efficiency of the proposed method through numerous numerical examples.

• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.173-184
• /
• 2023

강진에 대한 다양한 비선형 거동을 하는 부재요소들로 이루어진 교량시스템의 현재까지의 일반적인 지진취약도 평가방법은 부재-수준에서 평가하는 것이다. 본 연구의 목적 부재-수준의 지진취약도 평가결과로부터 구조시스템을 대표하는 시스템-수준의 지진취약도 평가방법을 개발하는 것이다. 교량의 지진 거동을 일반적으로 교축방향과 교축직각방향으로 구분하기 때문에 본 연구에서도 시스템-수준 지진취약도를 두 방향에 대하여 구분해 평가하였다. 길이 방향에 대한 부재-수준의 지진취약도평가는 교각, 교량받침, 충돌, 교대, 낙교에 대하여 수행하였다. 교축직각 방향에 대해서는 충돌, 교대, 낙교의 손상이 영향을 주지 않으므로 부재-수준의 지진취약도평가는 교각과 교량받침에 대하여만 수행하였다. 다양한 구조부재의 비선형모델을 이용한 지진해석은 OpenSEES 프로그램을 사용하여 수행하였다. 시스템-수준의 지진취약도는 부재-수준 사이의 손상이 직렬연결이라고 가정하고 평가하였다. 교각의 손상이 다른 부재-수준의 손상보다 시스템-수준의 지진취약도에 지배적인 영향을 주는 것을 알 수 있었다. 다시 말하면 가장 취약한 부재-수준의 지진취약도가 시스템-수준의 지진취약도에 가장 지배적인 영향을 주는 것을 의미한다.

• Molecules and Cells
• /
• 제26권2호
• /
• pp.131-139
• /
• 2008

Expression of the seven open reading frames (ORFs) of single-stranded DNA Curtoviruses such as Beet curly top virus (BCTV) and Beet severe curly top virus (BSCTV) is driven by a bi-directional promoter. To investigate this bidirectional promoter activity with respect to viral late gene expression, transgenic Arabidopsis plants expressing a GUS reporter gene under the control of either the BCTV or BSCTV bi-directional promoter were constructed. Transgenic plants harboring constructs showed higher expression levels when the promoter of the less virulent BCTV was used than when the promoter of the more virulent BSCTV was used. In transgenic seedlings, the reporter gene constructs were expressed primarily in actively dividing tissues such as root tips and apical meristems. As the transgenic plants matured, reporter gene expression diminished but viral infection of mature transgenic plants restored reporter gene expression, particularly in transgenic plants containing BCTV virion-sense gene promoter constructs. A 30 base pair conserved late element (CLE) motif was identified that was present three times in tandem in the BCTV promoter and once in that of BSCTV. Progressive deletion of these repeats from the BCTV promoter resulted in decreased reporter gene expression, but BSCTV promoters in which one or two extra copies of this motif were inserted did not exhibit increased late gene promoter activity. These results demonstrate that Curtovirus late gene expression by virion-sense promoters depends on the developmental stage of the host plant as well as on the number of CLE motifs present in the promoter.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.67-74
• /
• 2014

An inverter scroll compressor is used for the air conditioning in cars. Scrolls would be changed from the aluminum material to the magnesium material in order to satisfy the light weight trends of cars. The material changing influences on the scroll dimensions particularly the gap between two scrolls. Since the larger gap declines the performance of the compression, the gap between wraps of scrolls or the gap between wraps of scrolls to the plate of the opposite scroll is regarded as an important design variable. This paper is focused on the effects of the thermal stress due to the materials changing. The temperature difference between the inlet and the outlet is about 60 degrees and the highest operating temperature in the compressor is less than 110 degrees. The level of thermal stresses in the magnesium scroll is less than the result from aluminum one. The trend of the deformation is revealed that the normal directional deformation is 2 times lager than the in-plane directional deformation. Therefore the gap between the top of the wrap to the plate of the opposite scroll become more important than the other gaps. The orbiting scroll deforms larger than the fixed scroll by the thermal stresses. The deformation of the magnesium scroll is about 10% lager than that of the aluminum scroll. This value is similar to the ratio of the coefficients of thermal expansion of two materials. At the initial design stage, the results give many useful guides to engineers to propose gaps between parts.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.768-775
• /
• 2005

본 논문에서는 십자형 구조를 갖는 광대역 모노폴 안테나를 제시하고 모노폴 소자의 폭과 높이에 따른 복사 특성을 고찰하였다 제시된 모노폴 안테나는 십자형 구조의 복사 소자와 접지판과 소자 사이에 삽입한 임피던스 정합부에 의해 광대역 특성이 실현되었다. 제시된 안테나의 광대역 특성을 확인하기 위하여 주파수 $1.75\~2.655$ GHz에서 안테나를 설계$\cdot$제작하고 복사 특성을 측정하였다. 제시된 안테나는 수평면내 무지향성, 수직면내 지향성 특성을 가지며, VSWR은 사용 주파수 전대역에서 1.5 이하, 안테나 이득은 $2.5\~3.78$ dBi로 나타났다. 측정 결과로부터 제시된 안테나는 PCS, WCDMA, Wibro, 위성 DMB 밴드의 공용 실내 안테나로 사용될 수 있는 광대역 특성을 갖는 안테나로 확인되었다.