• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.194-213
• /
• 2022

This study comprehensively reviewed four types of integrated-optic electric-field sensors based on titanium diffused lithium-niobate waveguides: symmetric and asymmetric Mach-Zehnder interferometers, 1×2 directional couplers, and Y-fed balanced-bridge Mach-Zehnder interferometers. First, we briefly explain the crystal properties and electro-optic effect of lithium niobate and the waveguide fabrication process. We theoretically analyzed the key parameters and operating principles of each sensor and antennas. We also describe and compare the design, simulation, implementation, and performance tests: dc and ac characteristics, frequency response, dynamic range, and sensitivity. The experimental results revealed that the sensitivity of the sensor based on the Y-fed balanced bridge Mach-Zehnder interferometer (YBB-MZI) was higher than that of the other types of sensors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.846-851
• /
• 2010

A liquid-air interface sensing system using the flat end surfaces of a fused-silica fiber coupler has been demonstrated. The principle is based on the additional optical loss caused by changing the refractive index of the external material at the boundary of the end face made of a fiber. The immersion characteristics of this system with respect to the different splitting ratios of the couplers were investigated to determine the sensitivity when it responses to water and air. These experimental data are very useful for selecting the coupling ratio of a coupler in order to develop a multiple sensing probe system. In the proposed sensor structure, it can be emphasize that the sensing probe can be appropriately arrayed on the basis of splitting ratio of the coupler. As a result, it is expected that the proposed liquid-air interface sensors can also be applied to monitor flooding that occurs in multiple areas at the same time.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.19-24
• /
• 1991

This paper propose a new taegeuk shaped directional couper and verify the possibility of high power division rate in those directional coupler through the experiments. We took the taegeuk shaped structure in those proposed directional coupler to utilize a $3\lambda/4$ section of hybrid ring directional coupler actively, and calculated the branch admittances, which satisfied the condition of perfect matching and isolation in the center frequency, by even odd mode analyzing methodes. On the result, we knew that it can be realized a much higher power division rate than reported result in same circuit area within the producible resistance limit in the microstrip line, made the taegeuk shaped directional couplers with 0, 8, 16 dB power split ratio in the 10 GHz frequency using CGP - 502 plate, and confirmed the validity of theory through the experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1004-1010
• /
• 2003

In this paper, the 1/4 wavelength backward-wave directional coupler using coupled lines with finite metallization thickness is described. A mode-matching method, simple and fast approach to the quasi-static analysis, has been used to analyse this structure. The numerical results show that it is possible to overcome the disadvantages of weakly coupling, low directivity, and narrow strip distance non-realizable in the case of 1/4 wavelength backward-wave directional coupler with zero thickness conductor. It is also revealed that thicker metallization causes longer coupler length in the case of backward-wave symmetrical parallel coupled line directional coupler. The finite metallization thickness can be a new parameter for tight coupling in the design of backward-wave directional couplers, which enables us to design more accurate properties of monolithic microwave integrated circuits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.293-298
• /
• 2004

We investigate the effect of the wing width and thickness of a Double-Sided Deep-Ridge(DSDR) vertical directional coupler on the coupling length dependent on the polarization, We have found that the DSDR vertical directional coupler without a wing does not have polarization independent coupling lengths. The variation of the coupling length of TE and TM modes and the difference between the coupling lengths of the two modes are negligible as the wing width increases beyond the specific wing width for the same wing thickness. Thus, we can see that a DSDR vertical directional coupler has a wing width larger than the minimum wing width to obtain the polarization independent coupling length. The minimum wing width increases as the wing thickness increases for the same core thickness and as the core thickness decreases for the same wing width. Also, we have found that the minimum wing thickness is determined by the core thickness and the minimum wing thickness decreases as the core thickness increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.626-632
• /
• 2003

In this paper, forward-wave -3㏈ directional coupler with finite-thickness conductor and asymmetrical coupled lines are designed and experimentally verified using mode-matching based design methodology. Most of studies published in the literatures about the coupled lines are mainly concentrated on the adjustment of coupling amount by changing various geometric configurations. The analysis results in this paper show that thicker metalization requires reduced coupler length in the forward-wave directional coupler composed of asymmetrical coupled lines. Several forward-wave directional -3 ㏈ couplers with finite metalization thickness composed of asymmetrical coupled microstrip lines have been designed in the 5 ㎓ based on proposed design method. The measured data show -4.05㏈∼-4.09㏈ coupling at center frequency which is very closed to design value. The tight coupling has been implemented with accurate design methodology which take mentalization thickness into account.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.128-135
• /
• 2001

Optical wavelength filters based on directional couplers are rigorously designed and analyzed by Modal Transmission-Line Theory (MTLT). The conventional parallel directional coupler is utilized to implement a narrow-band filter, and it takes up the coupler with tapered structure as a wide-band filter. The power transfers of TE/TM modes in narrow-band filters are maximized at ${\lambda}=1.303{\mu}m\;and\;1.1496{\mu}m$, and the optical bandwidths are then 30nm and 10nm, respectively. Furthermore, when the coupling lengths of TE/TM modes in wide-band filters operating at ${\lambda}=1.55{\mu}m$ are selected as $183{\mu}m\;and\;178{\mu}m$, those are operated as the stop-band and pass-band filters, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.217-222
• /
• 2015

Longitudinal transmission-line modal theory is applied to analyze the guiding mode characteristics along 1D & 2D grating patterns of plasmonic grating-assisted directional couplers (P-GADC) based on silicon waveguide. By defining supermodes amenable to rigorous analytical solutions and interference between even and odd modes, the field distributions of TE modes for each grating patterns are evaluated. The numerical result reveals that the field distribution with maximum coupling efficiency occurs at P-GADC composed by square grating pattern. That is, it reveals at a minium gap condition of grating period $d_{min}=8.8{\mu}m$ different from conventional phase-matching condition of GADC.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.187-192
• /
• 2017

Rigorous longitudinal modal transmission-line theory (L-MTLT) is applied to analyze maximum power transfer in asymmetric grating-assisted directional couplers(A-GADC). By defining a coupling efficiency amenable to rigorous analytical solutions and interference between symmetric and asymmetric supermodes, the power exchange of TE modes as a function of propagation distance is numerically evaluated. The numerical result reveals that maximum power transfer occurs at a grating period ${\Lambda}_{eq}$, in which the insertion loss of supermodes is equal to each other. That is, it is generally different from conventional phase-matching condition of GADC. Furthermore, as the asymmetric profile of grating change to symmetrical profile, the coupling length decreases and the coupling efficiency for power transmission increases.