• Journal of computational fluids engineering
• /
• v.11 no.3 s.34
• /
• pp.1-7
• /
• 2006

Euler and Navier-Stokes flow analyses for helicopter rotor in hover were performed as low and high fidelity analysis models respectively for the future multidisciplinary design optimization(MDO). These design-oriented analyses possess several attributes such as variable complexity, sensitivity-computation capability and modularity which analysis models involved in MDO are recommended to provide with. To realize PC-based analyses for both fidelity models, reduction of flow domain was made by appling farfield boundary condition based on 3-dimensional point sink with simple momentum theory and also periodic boundary condition in the azimuthal direction. Correlations of thrust, torque and their sensitivities between low and high complexity models were tried to evaluate the applicability of these analysis models in MDO process. It was found that the low-fidelity Euler analysis model predicted inaccurate sensitivity derivatives at relatively high angle of attack.

• Journal of Science and Technology Studies
• /
• v.13 no.2
• /
• pp.111-136
• /
• 2013

Meeting and solving persistent societal problems and challenges through science, technology, and innovation is now an emerging policy agenda in Korea. This socially-oriented innovation needs integrated approach on technological and social innovation. This study aims to suggest the necessity of new process named 'socio-technical planning' and propose its characteristics and implications. It deals with some cases of socio-technical planning activity and classifies their characteristics and types. And then, this study suggests the direction of socio-technical planning development.

• School Mathematics
• /
• v.2 no.2
• /
• pp.403-426
• /
• 2000

In this study, we tried to suggest a meaningful teaching method that is a mathematical thinking-oriented. After referring to the recent trend of mathematics education, we examined the direction that school mathematics should go. Next, we considered previous studies that deals with teaching methods focusing on the mathematical thinking. On the basis of the above examination, we accomplished case studies that aims at mathematical thinking-oriented teaching. And we explained that these case studies reflects the key points didactics of mathematics such as the education of ‘open mathematics’, constructivism etc. Finally, we proposed the necessity of mathematical thinking-oriented teaching in the current state of school mathematics.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1281-1282
• /
• 2007

Effect of tension coating on reducing iron losses of thin grain-oriented 3% Si-Fe steel sheets was investigated. Conventional grain-oriented electrical steel sheets have a forsterite coating layer and a tension coating layer in order to apply tensile stress to the rolling direction of the sheets. However the proposed coating method in this paper is to form only a tension coating layer on the both surfaces of the sheets. Iron losses with the tension coating were reduced by 8% under the condition of 1.7 T and 60 Hz. Consequently the proposed tension coating is applicable to $80{\mu}m$-thick 3% Si-Fe steel sheets.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.77-80
• /
• 2008

Low-cycle fatigue (LCF) tests were carried out to investigate the effect of loading direction on the cyclic deformation behavior and fatigue resistance of rolled AZ31 magnesium alloy. The as-received alloy showed a strong basal texture indicating that the most of basal planes of hexagonal close-packed structure were located parallel to the rolling direction. Two types of specimens whose loading directions were oriented parallel (RD) and vertical (ND) to the rolling direction. respectively, were used for the comparison. It was found that RD specimens yielded at much lower stresses during compression, while vice versa for the ND specimens, which was mainly attributed to the formation of primary twins. This anisotropic deformation behavior resulted in the different mean stresses during the cycling of RD and ND specimens, affecting the fatigue resistance of two specimens. The ND specimen showed a superior fatigue resistance as compared to the RD specimen under strain-controlled condition.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.347-351
• /
• 2012

Vermiculite-silica composites with a layered structure were fabricated by adding cellulose fibers as a pore former and by a simple uniaxial pressing and subsequent sintering process. Three different combinations of additives were used and their effects on the compressive strength and thermal conductivity of the composites were investigated. Both compressive strengths (42-128 MPa) and thermal conductivities (0.75-1.48 $W/m{\cdot}K$) in the direction perpendicular to the pressing direction (T) were higher than those (19-81 MPa and 0.32-1.04 $W/m{\cdot}K$) in the direction parallel to the pressing direction (S) in all samples. The anisotropy in both properties was attributed to the microstructural anisotropy, which was caused by the layered structure developed in the composites.

• Honam Mathematical Journal
• /
• v.39 no.4
• /
• pp.603-616
• /
• 2017

In this paper, we give some relations related with a spacelike principal-direction curve and a spacelike binormal-direction curve of a timelike Frenet curve. The Darboux-direction curve and the Darboux-rectifying curve of a timelike Frenet curve in Minkowski 3-space $E^3_1$ are introduced and some characterizations related with these associated curves are given. Later we define the spacelike V-direction curve which is associated with a timelike curve lying on a timelike oriented surface in $E^3_1$ and present some results together with the relationships between the curvatures of this associated curve.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1132-1134
• /
• 2006

In this research, we examined the correlation between the polymer wall boundary condition and the dynamic/ memory behavior of the ferroelectric liquid crystal (FLC) molecules. It was shown that the polymer wall perpendicular to the rubbing direction induces asymmetric switching to the rubbing direction and induce smaller cone angle angle of LC. On the contrary, in the cell with polymer wall parallel to the rubbing direction, the FLC molecules are oriented in the rubbing direction and shows symmetric switching and has larger cone angle. Memory behavior of each cell has strong correlation with the dynamic state of the FLC molecules. Response time of each cell was also examined.

• Journal of Industrial Convergence
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2019

The purpose of this study was to present the direction and implications of urban development in relation to climate risk factors and environment for practical implementation of urban development in response to climate change. The research method was carried out through a qualitative data survey and analysis. As a result of the study, the direction of urban development according to the climate risk factors emphasized the importance of preparing conditions for urban development by establishing a damage prevention system for natural disasters and analyzing the risk of natural disasters by conducting analysis of the impact and vulnerability of climate change in urban planning. The direction of urban development on the environmental side suggested the need for the promotion of public transport oriented development (TOD) in the form of urban planning to realize sustainable and practical urban development. Future research directions will need to be supplemented with more quantitative and empirical findings.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.248-248
• /
• 2003