• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.79-91
• /
• 2012

In the Digital Convergence era, the center of social networking is moving into on-line space. This means also that space for public is moving into the on-line space. Along with this, spaces in commercial area, offered as attraction factors, are taking a role as a public space. So, this paper defines these spaces mentioned above as public space and the like. Liberal and affluent communication of Digital Convergence has caused in new spatial cognitions such like, constant social space, flowing space, temporary space, and multiple space. This means the hybridization of on-line and off-line space and the advent of public convergent space. However, it is on-line-centered convergence and has positive effects and negative effects on relationship. This paper suggests the optimization of public convergent space to solve the problems and make better a public space for relationship. For achieving this, social disclosure is grasped as the common way to start relationship both off-line and on-line, and it is proved that social disclosure has three characters such as self-presentation, corporeality, and subjectivity. Subsequently, the differences of the roles of off-line and on-line space are separated by each individual character. These are self-presentation of performance vs. storytelling, corporeality of embodiment vs. disembodiment, and self-subjectivity vs. inter-subjectivity. By recognizing that there are multilevel spectrums between the formers and the latters, this paper presents the direction of the spatial configuration of public convergent space which offers the right of manipulation of self-disclosure. It will be used for presenting the prototype of public convergent space.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.955-971
• /
• 2015

In this paper, the influence of the polled direction of piezoelectric materials on the stress distribution is studied under time-harmonic dynamical load (time-harmonic Lamb's problem). The system considered in this study consists of piezoelectric covering layer and piezoelectric half-plane, and the harmonic dynamical load acts on the free face of the covering layer. The investigations are carried out by utilizing the exact equations of motion and relations of the linear theory of electro-elasticity. The plane-strain state is considered. It is assumed that the perfect contact conditions between the covering layer and half-plane are satisfied. The boundary value problems under consideration are solved by employing Fourier exponential transformation techniques with respect to coordinates directed along the interface line. Numerical results on the influence of the polled direction of the piezoelectric materials such as PZT-5A, PZT-5H, PZT-4 and PZT-7A on the normal stresses, shear stresses and electric potential acting on the interface plane are presented and discussed. As a result of the analyses, it is established that the polled directions of the piezoelectric materials play an important role on the values of the studied stresses and electric potential.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.818-823
• /
• 2005

Creep damage is one of the mosl important characteristics for the stability of high temperature structures such as huge energy converting facilities. Creep failure of Type 316LN stainless steel is highly correlated to generation and growth of the voids. In this paper, in order to investigate the correlation of creep rupture time and ultrasonic parameters (group velocity, angular velocity), creep-damaged Type 316LN specimens and measurements for the ultrasonic parameters were made. However, bi-directional measurements were applied along the load direction and the perpendicular direction to the load line by means of the contact type probe of which the central frequencies are 10MHz, 15MHz and 20MHz. Analyzing the angular velocities of the ultrasonic signals obtained from the load direction, it was confirmed that the angular velocities were declined as the creep time passed when 15MHz and 20MHz probes were used. Also, the group velocities were declined for all three frequencies as the creep time increased. Thus, positive feasibility for the creep damage evaluation by means of the angular and group velocities was confirmed. Moreover, result of analysis for the ultrasonic signal which was obtained from the perpendicular direction upon the angular and group velocities indicated little variation for both of the angular and group velocities. Therefore, the creep damage is likely to represent anisotropic itself.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.616-625
• /
• 2009

With suffering financial crisis in 1997, Korea's fashion market has grown in the direction that satisfies the reasonable price and diverse consumer's sensitivity and needs. The aim of this study is to examine whether the cutting portion in the waist line is surely necessary for designing the jacket pattern in men's wear, by closely examining the effects of the cutting portion in the waist line on the external appearance and functionality given designing the jacket pattern in men's wear for the standard body type in 20s. The results of the study are as follows. As a result of evaluating the external appearance, when having evaluated by dividing into 14 items such as the whole surface, the side, and the back side, the experimental clothing, which wasn't cut the waist line, obtained the highest mark in 13 items and, the significant difference was indicated in 10 items except 4 items. As a result of evaluating performance, the experimental clothing, which wasn't cut the waist line, obtained the highest mark in 13 items among 25 items in the total. Next, the cutting portion in the waist line obtained the highest mark in 10 items for the experimental clothing with opening in 1.0cm. The next was indicated to be in order of the experimental clothing with 1.5cm and the experimental clothing with 0.5cm. Given seeing the above result, the cutting portion in the waist line given designing the jacket pattern for the standard body type in 20s could be known that the experimental clothing with the most excellent mark in the evaluation of performance was all the experimental clothing with 0.0cm whose waist line wasn't cut.

• The Journal of Korean Physical Therapy
• /
• v.25 no.2
• /
• pp.88-95
• /
• 2013

Purpose: The purpose of this study was to conduct an analysis of kinematics of lower extremities and trunk in stance phase of walking according to turning direction. Methods: Ten university students (five male, five female) who were in their 20s (mean age was 20.6 years old) participated in this study. Participants did not have participants did not have any problem with skeletal muscular system. We used the "Qualisys motion capture system" for analysis of trunk and lower extremity movement in stance phase of walking according to turning direction. We collected data while subjects walked a distance of 10 m, and at the 6 m line, subjects were required to turn to the left side and the right leg was positioned in stance phase and the left leg was positioned in swing. For data analysis, the SPSS for Windows ver. 20.0 statistics program was used in performance of one way analysis of variance according to turning direction. Results: Significant difference of trunk and lower extremities was observed for turning direction according to walking cycle (p<0.05). Upper trunk movement showed a greater increase at three dimensions than lower trunk, and in heel off phase, pelvic movement showed a greater increase than lower trunk (p<0.05). In 45 degree and 90 degrees of turning direction, all movements of trunk and lower extremities were significantly different among three events of stance phase (p<0.05). Conclusion: We suggest that three-dimensional movement analysis of trunk and lower extremities during turning movement was very important in order to indicate increasing balance or walking ability for people with impaired movement or walking.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.35-40
• /
• 2019

Laser processing has been used in various fields. In this study, the feasibility of a hydrophobic surface was investigated through the laser cladding technique. A diode laser was used, and the output was set to 600-800 W. Seven different specimens were prepared with different cladding widths and spacings, and the contact angles for water droplets were evaluated. As a result, the contact angle of water droplets measured in the direction parallel to the cladding line was higher than that in the vertical direction. The wider the cladding width and the cladding space, the higher the contact angle in the parallel direction. It is thought that when a higher contact angle is formed in the parallel direction, more air can be placed in the valley between the cladding lines. In addition, for the hydrophobic coating effect, the contact angle of the coated cladding surface was increased by about $5-15^{\circ}$ as a whole compared to the coated smooth surface. It was confirmed that the wetting characteristics were improved through the cladding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.355-362
• /
• 2009

A new intra field deinterlacing algorithm with edge map in the image block is introduced. Conventional deinterlacing methods usually employ edge-based line average algorithm within pixel-by-pixel approach. However, it is sensitive to variation of intensity. To reduce this shortcoming, we proposed edge direction vector computed by edge map, and also its interpolation technique. We first introduce an edge direction vector, which is computed by Sobel mask, so that finer resolution of the edge direction can be acquired. The proposed edge direction vector oriented deinterlacer operates by identifying small pixel variations in five orientations, while weighted averaging to estimate missing pixel. According to the edge direction of the direction vector, we calculate weights on each edge direction. These weight values multiplied by the candidate deinterlaced pixels in order to successively build approximations of the deinterlaced sequence.

• Journal of Educational Research in Mathematics
• /
• v.25 no.2
• /
• pp.177-188
• /
• 2015

In this paper, I investigated the historical development process for the product of two vectors in the plane and space, and draw implications for educational guidance to internal and external product of vectors based on it. The results of the historical analysis show that efforts to define the product of the two line segments having different direction in the plane justified the rules of complex algebraic calculations with its length of the product of their lengths and its direction of the sum of their directions. Also, the efforts to define the product of the two line segments having different direction in three dimensional space led to the introduction of quaternion. In addition, It is founded that the inner product and outer product of vectors was derived from the real part and vector part of multiplication of two quaternions. Based on these results, I claimed that we should review the current deployment method of making inner product and outer product as multiplications that are not related to each other, and suggested one approach for connecting the inner and outer product.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2123-2130
• /
• 2000

Radial immersion ratio is an important factor to determine the threshold in face milling and should be estimated in process for automatic force regulation. In this paper, presented is a method of on-line estimation of the radial immersion ratio using cutting force. When a tooth finishes sweeping, sudden drop of cutting forces occurs. This force drop is equal to the cutting force that acts on a single tooth at the swept angle of cut and can be obtained from cutting force signal in feed and cross-feed direction. The ratio of cutting forces in feed and cross-feed directions acting on the single tooth at the swept angle of cut is a function of the swept angle of cut and the ratio of radial to tangential cutting force. In the research, it is found that the ratio of radial to tangential cutting force is not affected by cutting conditions and axial rake angle. Therefore, the ratio of radial to tangential cutting force determined by just one preliminary experiment can be used regardless of the cutting conditions. Using the measured cutting force and predetermined ratio, the radial immersion ratio is estimated. Various experiments show that the radial immersion ratio and instantaneous ratio of the radial to tangential direction cutting force can be estimated very well by the proposed method.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1055-1062
• /
• 2022

In this study, the mechanical properties of 80% cold-rolled austenitic 316L stainless steel were evaluated using specimens subjected to reverse transformation at 500-750℃ for 20 minutes and reverse transformation at 700℃ for 2-60 minutes. Also, for the elastic wave obtained from the tensile test, the dominant frequency according to the reverse transformation condition was investigated by time-frequency analysis. The SEM image of the 80% cold-rolled material was transformed into martensite and showed line and cross shapes. The TEM image showed that line shapes were shown at the grain, and grain boundary of martensite. The higher the heat treatment temperature and the longer time, the larger the grain. Tensile strength decreased as the heat treatment temperature and time increased, but elongation increased. Hardness was proportional to tensile strength. This is because the grain with different directions showed the same direction due to reverse transformation. The dominant frequency was decreased and then increased as the temperature and time increased. This is because the direction of the grain is different at a low temperature and the same direction is shown at a high temperature.