• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.251-252
• /
• 2014

본 논문은 직접토크 제어에서 토크와 자속 오차에 따라 결정된 전압 벡터가 가지고 있는 자속 및 토크 출력 특성을 전압의 d-q 해석을 통해서 분석하고, 6섹터 방식과 12섹터 방식에서 각 전압에 의해 발생되는 토크 및 자속 특성을 회전자 위치에 따라 해석하였다. 또한, 전압벡터의 전압특성을 모의하기 위한 근사 전압함수를 제시하고, 근사전압함수를 통해 직접토크 제어 방식에서의 자속 및 토크 제어의 성능향상이 가능함을 실험을 통해 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.209-210
• /
• 2015

본 논문은 스위치드 릴럭턴스 전동기(Switched Reluctance Motor, 이하 SRM)의 상 인덕턴스를 추정하여 최고점과 최저점을 검출하는 방식으로 위치 센서를 이용하지 않는 직접토크 제어를 제안한다. 최고점으로부터 최저점의 위치 정보를 계산하여 이를 기준으로 회전 중인 회전자의 위치정보를 얻는다. 또한, 회전자의 위치정보를 필요로 하는 토크 계산 및 토크분배함수(Torque Sharing Function, 이하 TSF)는 상 인덕턴스 최저점 검출과 연관하여 계산하였다. 제안한 알고리즘은 시뮬레이션을 통하여 가능성을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1671-1676
• /
• 1991

Direct digital design of computed torque controllers for a robot manipulator is discussed in this paper. A simple discrete-time model of the robot manipulator obtained by Euler's method is used for the design. Taking account of computation delay in the digital processor, we propose predictor-based designs of the PD and PID type controllers. The PID type controller is designed based on a modified version of the discrete-time integral controller proposed by Mita. For both controllers, the same formulas can be used to determine the feedback gains. A simulation example is presented to compare the robustness of the proposed controllers against physical parameter variations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.1004-1006
• /
• 2004

본 연구는 스위치드 릴럭턴스 모터의 토크 리플 저감을 위한 제어 방법으로써 비선형 토크 추정에 의한 직접 토크 제어법을 제안하고 제안된 방법의 유용성에 대하여 실험과 시뮬레이션에 의하여 확인하였다. 또한 직접 토크 제어기법의 핵심인 전류제어의 성능 개선을 위하여 비간섭 전류제어법을 제시하고 그 성능을 검토하였다. 본 연구 결과는 SRM의 응용에 유용하게 이용될 것으로 판단된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.449-450
• /
• 2014

풍력 발전 시스템은 풍력 터빈이 바람에 의해 회전함으로써 발전이 된다. 실험실에서 풍력 발전 시스템을 연구하기 위해서는 바람이 하는 역할을 별도의 모터를 사용하여 회전시켜 주어야 하는데 본 논문에서는 유도전동기의 직접 토크 제어를 이용하여 풍속 데이터를 가지고 상응하는 토크의 지령치로 환산하여 풍력 에너지를 모델링 하였다. 이렇게 발전된 에너지를 최대의 효율로 전달하기 위해서는 MPPT기능이 수행되어야 하며 별도의 센서가 필요없는 Fuzzy MPPT를 수행하였다.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.365-371
• /
• 2012

This paper presents robust control performance of a direct current(DC) motor with brake system adopting a giant electrorheological(GER) fluid, whose distinguished feature is an extremely high value of yield stress. As a first step, Bingham characteristics of the GER fluid is experimentally investigated using the Couette type electroviscometer. A cylindrical type of ER brake is then devised based on the Bingham model, and its braking torque is evaluated. Structural analysis of ER break is performed using ANSYS. After formulating the governing equation of motion for the DC motor with ER brake system, a sliding mode control algorithm, which is very robust to external disturbances and parameter uncertainties, is synthesized and experimentally realized in order to achieve desired rotational speed trajectories. The tracking responses of the control system are then evaluated and verified by presenting speed control performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.218-222
• /
• 1993

A sliding mode controller associated with the moving sliding surface is formulate for the tip position control of a single-link flexible manipulator. After establishing the plant model which characterizes a noncollocated control system, a discontinuous control law is then constructed by restricting that velocity state variables are not available from direct sensor measurements. Using the proposed control law favorable system responses are accomplished through shortening the reaching phase without increasing maximum control torque. Furthermore, a low sensitiveness to extraneous disturbance is obtained. Computer simulations are undertaken in order to demonstrate these superior control performance characteristics to be accrued from the proposed methodology.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권10호
• /
• pp.555-562
• /
• 2000

We propose an adaptive nonlinear control algorithm for compensation of the stick-slip friction in a dynamic system. The friction force and mass of the system are estimated and compensated by adaptive control law. Especially, as the nonlinear control input in a small tracking error zone is enlarged by the nonlinear function, the steady state error is significantly reduced. The proposed algorithm is a direct adaptive control method based on the Laypunov stability theory, and its convergence is guaranteed under the bounded noise or torque disturbance. We verified the performance of the proposed algorithm by computer simulation on one-DOF mechanical system with friction.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.35-38
• /
• 2021

Conventional direct current (DC) rotating machines are usually used for crane and press machine using high torque in metal and steel industries, because of a constant output power along variable rotating speed. A general DC motor with permanent field magnets could not increase a magnetic flux density at a gap between armature coils and field magnets. However, a superconducting DC motor has field magnets composed with high temperature superconducting (HTS) coils and it could increase the magnetic flux density at the gap to over 10 times than those of a general DC motor by control the excitation current into HTS coils. The superconducting DC motor could be operated with extremely high torque and constant output power at a low rotational speed. In this paper, a 500 W superconducting DC rotating machine was conceptually designed with a LN₂ (Liquid Nitrogen) cooling method and the operation characteristics results of HTS field magnets were presented. The two no-insulation HTS magnets for a 500 W superconducting DC rotating machine were fabricated. The excitation current for the HTS magnets could be controlled from 0 to 40 A. This test results will be available to design large-sized HTS magnets for a number of hundred kW class superconducting DC rotating machine under LN₂ cooling system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.47-51
• /
• 1996

In this paper, we propose a method for compliance control of a SCARA type 2-freedom direct drive(DD) manipulator. Each joint of the manipulator is driven by a travelling ultrasonic motor(USM). The travelling USM has good some characteristics over conventional servo motors such as compact size, light weight, silent motion, high torque and high speed response. By controlling the elasticity and viscosity of robot joints, a robot can work in compliance with external environment. we control the elastic coefficient and the viscous coefficient of joint by adjusting the phase difference of the motor power. And we contemplate transient response of USM with adjusting the elastic coefficient and the viscous coefficient. To use the result, we can control the robot to reach its goal with compliance motion. It remains for further research to develop the impedance control of USM.