• 한국컴퓨터그래픽스학회논문지
• /
• 제16권2호
• /
• pp.39-45
• /
• 2010

물체의 색은 모양과 더불어 사람이 바깥세상의 사물을 알아보는데 중요한 역할을 한다. 이런 색상을 인식하는 것은 태양과 같은 빛이 존재하기 때문이다. 빛은 여러 파장들로 구성되어 있으며, 눈에 보이지 않는 적외선, 자외선의 영역과 색을 인식시켜 줄 수 있는 눈에 보이는 가시광선 영역 등으로 이루어져 있다. 이러한 모든 파장의 빛이 균등하게 혼합되면 그 빛은 흰 색을 띄게 되며, 이를 백색광이라고 한다. 백색광이 굴절이 이루어지면 그 구성되어져 있는 가시광선 영역이 여러 가지 색으로 갈라지는데 이것을 분산현상이라 한다. 본 논문에서는, 백색광을 무지개의 대표적인 일곱 가지 색상으로 구성하고 자연의 분상현상을 시뮬레이션하기 위해 N색 분산 포톤 매핑 방법을 제안하였다.

• 대한공간정보학회지
• /
• 제21권1호
• /
• pp.87-93
• /
• 2013

3차원 시뮬레이션을 이용하여 조망, 일조, 일영, 직광 등 3차원 공간분석에 대한 분야가 발전함에 따라 3차원 시뮬레이션에 필요한 3차원 지형모델 제작에 관한 연구가 필요하게 되었다. 본 연구에서는 법선의 방정식을 이용하여 2차원 설계도면을 3차원 지형모델로 변환함으로써 개발후의 3차원 지형모델을 생성하는 방안을 제시하였다. 2차원 설계로부터 3차원 지형모델 생성을 위한 자동화 알고리즘을 개발하였으며, 향후 세부적인 연구가 필요할 것으로 예상된다.

• 한국의류학회지
• /
• 제41권2호
• /
• pp.212-223
• /
• 2017

This research investigated the screen printing method for natural indigo dye on cotton fabric. We examined four types of thickening agents (arabic gum, guar gum, indalca, and CMC) based on their ability to retard the oxidation of natural indigo print paste while the paste remained on the screen frame. The results indicated that the retardation of arabic gum towards oxidation was the greatest among the four types of thickening agents. The highest K/S value of the printed cotton was observed with a dye concentration of 50g/L fermented indigo powder. The best printing results were obtained when the duration of dye efficiency was tested for the 10 minutes of the dye paste remaining on the screen with a thickening agent concentration of 26.56% that represented 530 cps viscosity. The test of colorfastness to washing and rubbing of the printed cotton resulted in grade 5, and the colorfastness to sunlight resulted in grade 4. Chinese traditional Naminwhapo printing was reproduced on cotton fabric using the natural indigo printing method derived from this study.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.45-52
• /
• 2008

Daylighting systems can improve the luminous quality of indoor environment and reduce the building's electric lighting energy consumption. For designing good daylighting, place the light where it is desired and avoid excessive contrasts, glare and high light levels. Sun scoop, light scoop and sun catcher systems have been used for alternative systems compared to other natural lighting systems. This study aims to evaluate daylighting performance of sun scoop, light scoop and sun catcher systems using scale model experiments. For the purpose, the 1/10 scale models of the systems were made as the same areas of glazing(10 percent of floor area) on the top of the center roof. Totally 15 measuring points of illuminance on the horizontal work plane were monitored from 09:30 to 12:30 on October 29, 2007. Agilent data logger and photometric sensors Li-cor were used. As the results, the topside lighting systems can improve the illumination uniformity than side lighting and top lighting. However, the appropriated shading system should be integrated to prevent the direct sunlight.

• 한국통신학회논문지
• /
• 제36권12B호
• /
• pp.1595-1600
• /
• 2011

IM/DD 방식을 이용한 가시광 무선 통신의 성능 저하를 발생시키는 인공광과 태양광에 의한 잡음 레벨을 분석하였다. 통신 성능을 확인하기 위해 LED에 QPSK로 변조된 50ksymbol/sec의 신호를 2MHz의 부반송파에 전송하였으며 PD를 통해 수신된 신호의 EVM과 스펙트럼을 분석하였다. 또한 차광막을 이용하여 신호의 성능을 향상시켰으며 이를 통해 IM/DD방식으로 실외 가시광 통신이 가능함을 확인하였다.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.631-642
• /
• 2009

The sun is a useful reference direction because of its brightness relative to other astronomical objects and its relatively small apparent radius as viewed by spacecrafts near the Earth. Most satellites use solar power as a source of energy, and so need to make sure that solar panels are oriented correctly with respect to the sun. Also, some satellites have sensitive instruments that must not be exposed to direct sunlight. For all these reasons, sun sensors are important components in spacecraft attitude determination and control systems. To minimize components and structural mass, some components have multiple purposes. The solar cells will provide power and also be used as coarse sun sensors. A coarse Sun sensor is a low-cost attitude determination sensor suitable for a wide range of space missions. The sensor measures the sun angle in two orthogonal axes. The Sun sensor measures the sun angle in both azimuth and elevation. This paper presents the development of a model to determine the attitude of a small cube-shaped satellite in space relative to the sun's direction. This sensor helps small cube-shaped Pico satellites to perform accurate attitude determination without requiring additional hardware.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.155-160
• /
• 2009

The increasingly high prices for oil, the exhaustion of fossil fuels as well as concern about global warming are driving rapid growth of alternative sources of energy in the world. The active solution for global environment and exhaustion of energy sources is to develop and popularize the technologies to use natural energy such as sunlight, wind, and water. PV(Photovoltaic) modules are efficient devices that has been considered a logical material for use in buildings. Recent advanced BIPV(Building Integrated PV) technology have rapidly made PVs suitable for direct integration into construction in the world. Recently, building has been higher and higher. Tall buildings have many advantages for BIPV such as wide facade area and no shading effect by the surrounding buildings. However. BIPV has not been applied for tall building facade yet. Therefore, the purpose of the research is to develop suitable BIPV for tall buildings and to put these technologies to practical use. Therefore, the purpose of the study is to investigate unification of BIPV to curtain wall to apply BIPV on tall building through research into advanced application of overseas BIPV cases.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.148-154
• /
• 2009

By the skyscraper building, increase of skin area and expansion of curtain wall system will be the important factors of acceleration in extending supply of BIPV system. In the future interior environmental evaluation is not a necessary to the residents but an essential term which will bring enormous influence. In the interior environmental evaluation, natural light will let the residents with direct contact with outside circumstances and make them feel opened. also only the daylight has radiant energy and color rendering that will have a great influence to residents' mental, operation efficiency and advancing productivity. This research compares and analyzes BIPC system in office spaces with two general sunlight's module. In addition to natural light's efficiency for BIPC system's comfort and confirmed economical efficiency will be applied to basic research data. Hence forth, ensuring indoor intensity of illumination and controlling light system to reducing energy research data will be demanded to increase the amount of supplying BIPC system. Also continuance research in the possibility of applying BIPC system in various buildings, room temperature affected by location of windows and its condensation, and economical evaluation will be required.

• 한국환경보건학회지
• /
• 제10권2호
• /
• pp.99-111
• /
• 1984

The survey was made on the use and care of cooking oil during a period from March 1st to April 30th in 1984to attribute for the later studies on the betterment of dietary conditions. 849 housewives in Seoul were selected randomly for the survey. The results obtained are as followes : Among 849 respondents, age of thirties consisted of 52.5% and 32.6% of for the fourties. For the levels of education, 26.1% of housewives was the graduates of university and 35.1% was of highschool. 38.2% of the respondents earned more than 600, 000won monthly, but 46.8% were on less than 600, 000won. 1. 67.8% of 370 housewives purchased soybean oil once a month, and 17.0% did once every three month. 2. In the method of placing the oil, 41.0% of housewives kept it at a cool place where no direct sunlight reaches, and the rest 51.8% kept the oil under the sink. 3. For the kind of container to keep the oil, 30.3% of them used glass and 24.3% used the plastic. 4. For the period of keeping the cooking oil for the reuse, 58.5% of the housewives kept the used oil for one month whereas 13.2% kept for two months. 5. 39.9% of housewives reused the same cooking oil twice before discarding it but 27.9% reused three times. 6. 27.0% of them dump rancid oil in drains, and 37.0% dump in dustbins.