• 한국의사학회지
• /
• 제30권2호
• /
• pp.45-61
• /
• 2017

Objectives : This research aims to investigate the consumer's interest in the Korean Medicine (KM) industry by using Google-trends and Naver-Data lab. A quick and uncomplicated way for those who are already involved with KM industry but do not have expertise in utilizing Big-data searches, is introduced. Methods : 'Direct keyword' was set by FGI (Focus Group Interview) and 'Detailed keyword' was set by using relevant word search and autocomplete search functions in the search engine. By inquiring Naver-Data lab, keyword search volumes are compared by age and sex, date range, and originating region of the researcher. It is possible to determine whether the data is reliable or authentic through examining the associated query. Selected direct keywords used through FGI (Focus Group Interview) were 'Acupuncture', 'Herbal Medicine', 'Cupping', 'Musculoskeletal Disease', 'Diet', and 'Stemina'. Based on these keywords, the following results were derived from the keyword analysis. Results : From August 2016, there was a noticeable surge of interest in men's 'Cupping'. The search for 'Diet' increased in the second quarter of 2016 from all ages. The search volume of 'Stemna' for individuals in their 20s is higher than that of those in their 30s or 40s'. Researchers from the region of Chungcheongbuk-do had a higher level of interest in analgesics and less interest in Korean Medicine. There is a greater interest in the KM market from European countries and America, than from Korea, China, and other Asian countries. Discussion : Despite the limitations of the research, it is meaningful to introduce a quick and easy data search method to compare information by age, sex, and region. Conclusion : The future of research into Korea Medicine and this market is confirmed by our data results which indicate interest from Europe, the United States, and other western countries, but less interest from Korea, China and other Asian countries.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• 컴퓨터교육학회논문지
• /
• 제5권4호
• /
• pp.71-78
• /
• 2002

교육시스템에서 분산된 교육 정보를 검색, 공유하는 새로운 기술로 이동 에이전트가 주목을 받고 있다. 효율적인 검색을 수행하기 위해 많은 양의 컨텐츠를 전송받는 대신 검색을 수행하는 에이전트를 직접 서버에 전달하는 방식을 이용한다. 본 연구에서는 이동 에이전트를 이용하여 교육용 사이트에 분산적으로 존재하는 질의응답 게시판과 유즈넷의 자료를 검색, 공유하는 시스템의 모델을 제안한다. 제안된 시스템의 효율성을 살펴보기 위해 기존의 검색 모델과의 비교 실험을 하였으며 교육용 서버로 에이전트가 이동함에 따라 네트워크 트래픽이 감소됨을 볼 수 있었다 또한 이동 에이전트가 검색 위치로 이동 후 게시판과 유즈넷의 자료 변환을 위한 최적 검색 시간이 단축되었다.

• 한국통신학회논문지
• /
• 제31권7A호
• /
• pp.682-688
• /
• 2006

본 논문에서는 파일롯 채널(pilot channel)이 존재하는 직접확산 코드분할 다중접속 방식(DS-CDMA)에서 PN 코드의 초기 동기획득 성능을 개선하기 위해 연판정 기법을 사용하는 방법을 제안한다. 본 논문에서 제안하는 연판정 기법을 하이브리드 동기획득 알고리듬에 적용하고, 평균 동기획득 시간 측면에서 분석한다. 분석을 위해, 제안된 방식의 수학적 모델을 제시하고, IMT-2000 채널모델에서 시뮬레이션을 수행한다. 수식적인 분석 결과, 제안된 방식이 한 쌍의 임계치를 사용하는 기존 방식에 비해 평균 동기획득 시간에서 약 0.2초 내지 0.4초 정도의 성능향상을 가져오는 것을 보여준다. 이것은 연판정 기법이 기존의 경판정 기법의 사용으로 인한 성능열화를 보상함으로써 생기는 이득이라고 볼 수 있다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.683-694
• /
• 2004

본 논문에서는 접합부의 비선형을 고려한 공간 강뼈대 구조물의 고등해석과 최적설계를 수행하였다. 고등해석은 접합부의 비선형, 기하학적 비선형 및 재료적 비선형을 고려한다. 접합부의 비선형은 Kishi와 Chen이 제안한 3가지 매개변수를 가지는 파워모델을 사용하여 고려하였다. 기하학적 비선형은 안정함수를 사용하여 고려하였으며, 재료적 비선형은 CRC 접선 탄성계수와 포물선 함수를 사용함으로서 고려하였다. 최적화 기법으로는 Choi와 Kim이 제안한 직접탐색법을 사용하였다. 직접탐색법은 LRFD의 상관방정식으로 계산된 값중에서 최대값을 가지는 부재의 크기를 단계별로 증가시키는 방법이다. 목적함수는 구조물의 중량을 사용하였으며, 제약조건식은 구조시스템의 하중-저항능력, 처짐, 층간 수평변위 및 연성요구 조건을 고려하였다. 제안된 방법에 의한 설계결과를 LRFD방법과 비교하였다.

• 한국강구조학회 논문집
• /
• 제15권6호통권67호
• /
• pp.661-672
• /
• 2003

본 논문에서는 접합부의 비선형을 고려한 강뼈대 구조물의 고등해석과 최적설계를 수행하였다. 고등해석은 접합부의 비선형, 기하학적 비선형 및 재료적 비선형을 고려한다. 접합부의 비선형은 Kishi와 Chen이 제안한 3가지 매개변수를 가지는 파워모델을 사용하여 고려하였다. 기하학적 비선형은 안정함수를 사용하여 고려하였으며, 재료적 비선형은 CRC 접선 탄성계수와 포물선 함수를 사용함으로서 고려하였다. 최적화 기법으로는 Choi와 Kim이 제안한 직접탐색법을 사용하였다. 직접탐색법은 LRFD의 상관방정식으로 계산된 값중에서 최대값을 가지는 부재의 크기를 단계별로 증가시키는 방법이다. 목적함수는 구조물의 중량을 사용하였으며, 제약조건식은 구조시스템의 하중-저항능력, 처짐, 층간 수평변위 및 연성요구 조건을 고려하였다. 제안된 방법에 의한 설계결과를 LRFD방법과 비교하였다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.119-133
• /
• 2019

Although the dual modulation wave method can solve the low-frequency neutral point potential (NPP) fluctuation problem for three-level neutral point clamped converters, it also increases the switching frequency and limits the zero-sequence voltage. That makes it harmful when dealing with the NPP drift problem if the converter suffers from a long dead time or asymmetric loads. By introducing two degrees of freedom (2-DOF), an NPP control based on a search optimization method can demonstrate its ability to cope with the above mentioned two types of NPP problems. However, the amount of calculations for obtaining an optimal 2-DOF is so large that the method cannot be applied to certain industrial applications with an inexpensive digital signal processor. In this paper, a novel optimal 2-DOF-based NPP control is proposed. The relationships between the NPP and the 2-DOF are analyzed and a method for directly determining the optimal 2-DOF is also discussed. Using a direct calculation method, the amount of calculations is significantly reduced. In addition, the proposed method is able to maintain the strongest control ability for the two types of NPP problems. Finally, some experimental results are given to confirm the validity and feasibility of the proposed method.

• 대한기계학회논문집B
• /
• 제31권7호
• /
• pp.635-643
• /
• 2007

An inverse radiation analysis is presented for the estimation of the radiation properties for an absorbing, emitting, and scattering media with diffusely emitting and reflecting opaque boundaries. In this study, a repulsive particle swarm optimization(RPSO) algorithm which is a relatively recent heuristic search method is proposed as an effective method for improving the search efficiency for unknown parameters. To verify the performance of the proposed RPSO algorithm, it is compared with a basic particle swarm optimization(PSO) algorithm and a hybrid genetic algorithm(HGA) for the inverse radiation problem with estimating the various radiation properties in a two-dimensional irregular medium when the measured temperatures are given at only four data positions. A finite-volume method is applied to solve the radiative transfer equation of a direct problem to obtain measured temperatures.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1062-1065
• /
• 1993

Nuclear reactor operation is a human intensive task; one of the features of a problem for which fuzzy controllers present the most suitable solution. The performance of the fuzzy controllers can further be improved through tuning. In this work, application of a fuzzy controller in real-time control of a nuclear reactor is presented. The fuzzy controller is tuned on-line using direct gradient search method.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.291-309
• /
• 2020

To study oceanic and meteorological problems related to climate change, Korea has been operating several ocean research stations (ORSs). In 2011, the Gageocho ORS was attacked by Typhoon Muifa, and its structural members and several observation devices were severely damaged. After this event, the Gageocho ORS was rehabilitated with 5 m height to account for 100-yr extreme wave height, and the vibration measurement system was equipped to monitor the structural vibrational characteristics including natural frequencies and modal damping ratios. In this study, a mass reallocation method is presented for structural model updating of the Gageocho ORS based on the experimentally identified natural frequencies. A preliminary finite element (FE) model was constructed based on design drawings, and several of the candidate baseline FE models were manually built, taking into account the different structural conditions such as corroded thickness. Among these candidate baseline FE models, the most reasonable baseline FE model was selected by comparing the differences between the identified and calculated natural frequencies; the most suitable baseline FE model was updated based on the identified modal properties, and by using the pattern search method, which is one of direct search optimization methods. The mass reallocation method is newly proposed as a means to determine the equivalent mass quantities along the height and in a floor. It was found that the natural frequencies calculated based on the updated FE model was very close to the identified natural frequencies. In conclusion, it is expected that these results, which were obtained by updating a baseline FE model, can be useful for establishing the reference database for jacket-type offshore structures, and assessing the structural integrity of the Gageocho ORS.