• Journal of information and communication convergence engineering
• /
• 제4권3호
• /
• pp.101-104
• /
• 2006

We have investigated the spectral characteristics of the semiconductor lasers locked to the sidebands of the master laser in this paper, which were expressed by a series of the Bessel function. The numerical model for the semiconductor lasers based on the typical Lang's equation has been extended in order to take into account the simultaneous injection of the multiple sidebands of the directly modulated ML. We analyses characteristics of direct intensity modulation.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1223-1231
• /
• 2018

The direct torque control (DTC) scheme features a simple structure thanks to stator flux-oriented control. It has the advantage of robustness against motor parameters variation since only the stator resistance is involved in the control scheme. On the other hand, the disadvantage of DTC is large torque ripple. To reduce the torque ripple, many studies on DTC-space vector modulation (DTC-SVM) schemes, which modulate the duty ratio with a fixed switching cycle, have been proposed. However, there is the difficulty in obtaining the duty ratio for DTC-SVM. Hence, this paper proposes a new duty ratio selection and stator flux calculation methods for reducing torque ripple. Simulations and experiments were carried out to determine the validity of the proposed method. The proposed scheme has simplified the duty ratio command and achieved the same control performance as the conventional duty ratio modulation method without using the information of motor parameters.

• ETRI Journal
• /
• 제28권1호
• /
• pp.95-98
• /
• 2006

In this letter, a novel M-ary code-selected direct sequence (DS) ultra-wideband (UWB) communication system is presented. Our purpose is to achieve a high data rate by an M-ary code-selected direct sequence bipolar pulse amplitude modulation (MCSDS-BPAM) scheme. In this system, a particular DS code sequence is selected by the $log_2M$/2 bits from the DS gold code set. This scheme can accomplish both a high data rate without increasing the system bandwidth or changing the pulse shape and improve the BER with an increase of modulation level M even at a lower signal-to-noise ratio (SNR). The receiver signal processing algorithm is given for an MCSDS-BPAM UWB system over an ideal AWGN channel and correlation receivers.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.214-217
• /
• 1989

The most attractive feature of semiconductor lasers as sources for coherent optical communication system is the ability to produce frequency modulation by modulation of the bias current. The frequency deviation of semiconductor lasers under direct modulation depends on the laser structure and modulation frequency. This paper describes a circuit modeling techniques for the directly frequency modulated CSP (Channeled Substrated Planner) semiconductor laser. Predictions from this model are compared with the other published results of sinusoidal frequency modulation below than 1 GHz.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.994-1003
• /
• 2016

Two major obstacles in the utilization of electrical vehicles are their price and range. The collaboration of direct torque control (DTC) with induction motor (IM) is preferred for its low cost, easy implementation, and parameter independency. However, in terms of edges, the method has drawbacks, such as variable switching frequency and undesired current harmonic distortion. These drawbacks result in acoustic noise, reduced efficiency, and electromagnetic interference. A feed-forward approach for stator-flux-oriented DTC with space vector pulse-width modulation is presented in in this paper. The outcome of the proposed method is low current harmonic distortion with fixed switching frequency while preserving the torque performance and simple application feature of basic DTC. The method is applicable to existing and forthcoming IM drive systems via software adaptation. The validity of the proposed method is confirmed by simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.16-18
• /
• 2008

A novel general direct duty ratio pulse width modulation strategy is proposed to modulate matrix converters. By using average concept over one switching period, the modulation algorithm and the required equations are derived to synthesize the desired output voltage and to achieve the controlled input power factor. The proposed method use continuous carrier and the predetermined duty ratio signal for directly generating gating signals an thus is named "direct duty ratio PWM(DDPWM)". The feasibility and validity of the proposed strategy are verified by experimental results.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1314-1321
• /
• 2014

A new simplified topology for a dynamic voltage restorer (DVR) based on direct converter with a reduced number of switches is presented. The direct converter is fabricated using only three bi-directional controlled switches. The direct converter is connected between the grid and center-tapped series transformer. The center-tapped series transformer is used to inject the compensating voltage synthesized by the direct converter. The DVR can properly compensate for long-duration, balanced, and unbalanced voltage sag and swell by taking power from the grid. The switches are driven by ordinary pulse width modulation signals. Simulation and hardware results validate the idea that the proposed topology can mitigate sag of 50% and swell of unlimited quantity.

• 전기의세계
• /
• 제16권1호
• /
• pp.14-18
• /
• 1967

To analyze th frequency modulation system the characteristic equation of the F-M system, i.e., Mathieu's equation, is derived from the equivalent circuits of direct modulation system. The analysis of F-M equation is undertaken by the Yonsei 101 Analog Computer. And the computer solution is compared with the theoretical solution. It is concluded that not only the frequency but also the amplitude of the carrier wave are changed by varying the modulation index and the system becomes unstable if the modulation index is increased near to unity.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.660-669
• /
• 2008

This paper presents a new carrier based pulse-width modulation (PWM) method for matrix converters. By using the concept of average over one switching period, the modulation algorithm and the required equations are derived to synthesize the desired output voltage and to achieve the controlled input power factor. The proposed method uses a continuous carrier and the predetermined duty ratio signals to directly generate the gating signals and, thus, is referred to as "direct duty ratio PWM (DDPWM)". The feasibility and validity of the proposed method were verified by simulation and experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.603-610
• /
• 2008

In this paper, analytical methods for calculating the average probability of bit error of direct sequence pulse amplitude modulation ultra wideband (DS-PAM UWB) system and time hopping pulse position modulation ultra wideband (TH-PPM UWB) system are given. For the multi-user DS-PAM UWB system, the bipolar pulse amplitude modulation is used in order to achieve better performance. As we know, more attention is paid to the TH-PPM UWB systems recently. In this paper. we first introduce the accurate BER calculation methods of the multi-user DS-PAM UWB and TH-PPM UWB systems and then give the performance analysis over the ideal AWGN channel and a correlation receiver. Furthermore, we also introduce their applications in image transmission and data transmission and give the simulation results. The analytical method yields simple and exact formulas relating the performance to the system parameters.