• 한국분말재료학회지
• /
• 제29권4호
• /
• pp.309-313
• /
• 2022

In this study, additive manufacturing of a functionally graded material (FGM) as an alternative to joining dissimilar metals is investigated using directed energy deposition (DED). FGM consists of five different layers, which are mixtures of austenitic stainless steel (type 316 L) and low-alloy steel (LAS, ferritic steel) at ratios of 100:0 (A layer), 75:25 (B layer), 50:50 (C layer), 25:75 (D layer), and 0:100 (E layer), respectively, in each deposition layer. The FGM samples are successfully fabricated without cracks or delamination using the DED method, and specimens are characterized using optical and scanning electron microscopy to monitor their microstructures. In layers C and D of the sample, the tensile strength is determined to be very high owing to the formation of ferrite and martensite structures. However, the elongation is high in layers A and B, which contain a large fraction of austenite.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.703-708
• /
• 2000

최근에 상용차용 디젤 엔진의 성능 향상을 목적으로 엔진 설계가 급격히 변화되면서 캠 팔로우어(cam follower)와 캠(cam) 사이에 작용하는 접동면 하중의 증가로 접동면에서의 마모가 중요한 문제가 되고 있다. 본 연구에서는 기존의 주절체 및 소결합금 캠 팔로우어에 비해 내마모성이 우수한 세라믹 캠 팔로우어를 개발하였다. 잔류 응력을 완화시켜주는 중간층을 사용하지 않고 질화규소($Si_3N_4$) 팁과 중탄소강을 활성납재를 사용하여 직접 접합후 냉각시키는 과정에서 두 모재의 열팽창계수차에 의한 크라우닝(crowning, R) 이 형성되도록 하였다. 접합에 사용한 중탄소강은 열팽창시 이력(hysteresis) 거동을 나타내었으며, $A_{c1}$ 변태점인 $723^{\circ}C$ 이하에서 접합할 경우 원하는 크라우닝이 형성되었다. 접합온도가 $723^{\circ}C$ 이상이 되면 크라우닝 (R) 값이 온도에 따라 지수함수적으로 증가하였으며 이는 중탄소강의 상변태에 의한 열팽창.수축의 이력 특성으로 설명되어질 수 있었다. 규격에 맞는 크라우닝이 형성되는 최적 접합 온도는 $700~720^{\circ}C$의 범위였다. 질화규소와 중탄소강의 직접 접합방법으로 접합과 동시에 크라우닝을 형성시키고 제어함으로써 난가공재인 세라믹을 곡면 가공하지 않고도 적당한 곡률을 갖는 저가의 세라믹 캠 팔로우어를 제조할 수 있었다.

• Journal of Animal Science and Technology
• /
• 제50권6호
• /
• pp.753-762
• /
• 2008

GenBank database로부터 돼지 genomic 서열과 사람의 CFB 유전자의 CDS를 정렬하여 돼지 CFB 유전자의 CDS를 추정하였다. 이를 바탕으로 제작된 primer를 이용하여 RT-PCR을 실시하여 CDS 내부서열을 결정하였으며, 결정된 서열을 바탕으로 primer 제작 및 RACE-PCR을 실시하였다. 돼지 CFB 유전자의 전체 CDS 길이는 2298 bp였으며, 사람 및 마우스와의 비교결과 염기삽입/결실이 확인되었다. CDS 및 아미노산 서열을 사람 및 마우스와 비교한 결과 CDS는 84% 및 80%, 아미노산 서열은 79%, 77%의 상동성을 보였다. 포유류의 CFB에서 일반적으로 나타나는 보체조절단백질(complement control protein, CCP) 영역, Von willebrand factor A(VWFA) 영역, 그리고 serine protease 영역이 확인되었으며, 단백질 기능에 중요하게 작용하는 아미노산 잔기들은 돼지를 포함한 사람, 마우스, 소, 말에서 동일하게 나타났다. 사람, 마우스, 소, 말, 돼지 CFB 유전자의 아미노산 서열에 의한 유전적 거리지수 및 neighbor-joining tree 작성 결과 돼지는 같은 우제목에 속하는 소와 가장 가까운 계통유전학적 유연관계를 나타내었다. 결정된 CDS를 바탕으로 exon 영역을 증폭하기 위한 primer를 제작하였고, cSNP 분석을 위해서 돼지 6품종을 대상으로 direct sequencing을 실시하였다. 그 결과 아미노산 치환을 일으키는 3개(C13T, A1696G, A2015C)의 cSNP가 동정되었다. 동일한 DNA를 사용하여 동정된 3개의 cSNP를 대상으로 Multiplex- ARMS 방법으로 유전자형 분석 결과 direct sequencing 결과와 일치하였다. Multiplex-ARMS 방법의 재현성 확인을 위해 무작위로 2개의 DNA 시료를 선발한 후 direct sequencing과 Multiplex-ARMS 분석을 각각 실시하였으며, 3개의 cSNP에 대한 유전자형이 일치함을 재확인하였다. 따라서 본 연구에서 확인된 3개의 cSNP는 SLA class III 영역의 haplotype 분석을 위한 기초 자료로 사용될 수 있으며, Multiplex- ARMS 기법은 이종장기 개발에 필수적인 SLA 전체 영역 내 유전자들의 유전자형 분석을 위한 효율적인 분석방법이라고 사료된다.

• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.431-440
• /
• 2013

본 연구에서는 HSA800 후판 강재에 적합한 용접재를 선정하고자 표준인장실험을 수행하였다. 본 연구 수행 당시 HSA800 강재에 적용가능한 용접재로 GMAW 용접재(외국산)와 FCAW 용접재(국내산) 두 가지가 추천되어 이들을 사용하였다. 맞댐용접상세와 루트간격을 주요 실험변수로하여 표준인장실험을 통해 용접부의 성능을 평가하였다. 강도에 대한 설계요구조건은 두 용접재 모두 만족하였으나 연성능력 측면에서 GMAW 용접재 보다는 FCAW 용접재가 일관되고 우수한 거동을 보임이 실험적으로 확인되었다. 특히 GMAW 용접재는 용접효율과 작업성의 문제로 현장에서의 상향용접이 어려운 것으로 파악되었다. 같은 완전용입용접이라도 Single bevel보다는 V-groove가 안정적인 구조거동을 보이는 것으로 나타났다. 또한 현행 용접기준의 표준루트 간격을 벗어날 경우 용착의 어려움으로 비정상 파단면이 형성되고 접합성능도 저하됨이 확인되었다. 부분용입용접 접합부의 실험결과에 의할 때 현행 AISC 기준의 부분용입용접부 강도규정은 매우 보수적임이 확인되었다.

• 감성과학
• /
• 제22권3호
• /
• pp.103-108
• /
• 2019

휴전국인 우리나라는 의무복무제도를 시행하고 있다. 이에 취업 및 진학을 한 20대 초반의 사회 초년생은 군입대 문제로 많은 고민과 큰 걱정을 하고 있다. 이에 군에 대한 부정적인 인식과 군 생활 적응은 사회가 같이 풀어야 할 문제이다. 따라서 방송사 등 문제 해결을 위해 다각적으로 노력하고 있으나 역부족이다. 실제 군 입대 후 스트레스 및 불안정 심리상태의 장병 비중이 높다. 따라서 본 연구는 군 생활에서 일상적인 방법을 통해 스트레스, 불안감을 감소시키고, 집중력을 향상 시키고자 실행하였다. 주의 집중력 증가 및 스트레스, 불안감의 변화를 측정하기 위해 SMR파 대역의 주파수를 직접 노출시킨 실험군과 그렇지 않은 대조군으로 실험을 진행하였다. 실험군과 대조군 대한 대응표본 t-검정 결과는 신뢰수준 95%에서 t=2.487, p=0.042로 유의차가 인정되었다. 즉, 가상사격영상에서 특정 주파수를 제시한 실험군의 피실험자들이 스트레스 및 불안정 심리의 완화효과가 발생하였다. 본 실험의 결과를 활용하면 젊은 장병들의 군 생활 적응에 효과가 높은 것으로 사료된다. 추후 연구에서는 심전도와 뇌파의 상관관계의 확인이 필요하다.

• 대한지구과학교육학회지
• /
• 제4권3호
• /
• pp.231-241
• /
• 2011

The purpose of this study lies in finding out a betterment of ongoing experimental training program in science for the secondary science teachers to increase their training ability more effectively. For this, from 2010 July to September, a preliminary study on secondary science experiment training, questionnaire on the satisfaction of 128 secondary teachers in U metropolitan city with the training program were carried out which were contributive to the preparation of a better plan for the training program to be helpful for the teachers at schools. Following are the study results. First, the class theme should be selected by the teachers who participate in the experiment for the year to raise their training ability for experiment class. Second, the direct activity of the teachers' joining in experiment training for the development of experiment training module, and the demonstration with the developed module-used experiment class need to be included to the program Third, the assessment for the demonstration of experiment attitude, the development process of experiment training module, would be more advisable compared with that for written examination for the teachers joined in the experiment training to concentrate more on the experimental activities and to get richer experiment experience As this study results show, the theme selection, class method and assessment method involved in ongoing experiment training need for betterment for the science teachers to apply it at schools and this improved experiment training program proposed by this study is suitable for that under a condition it has to be modified and supplemented to the distinct features of every city and province.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권6호
• /
• pp.804-811
• /
• 2018

Objective: Complete mtDNA D-loop sequences of four Thai indigenous chicken varieties, including Pra-dhu-hang-dam (PD), Leung-hang-khao (LK), Chee (CH), and Dang (DA) were explored for genetic diversity and relationships with their potential ancestor and possible associates to address chicken domestication in Thailand. Methods: A total of 220 complete mtDNA D-loop sequences of the four Thai indigenous chicken varieties were obtained by Sanger direct sequencing of polymerase chain reaction amplicons of 1,231 to 1,232 base pair in size. A neighbor-joining dendrogram was constructed with reference complete mtDNA D-loop sequences of Red Junglefowl (RJF) and those different chicken breeds available on National Center for Biotechnology Information database. Genetic diversity indices and neutrality test by Tajima's D test were performed. Genetic differences both within and among populations were estimated using analysis of molecular variance (AMOVA). Pairwise fixation index ($F_{ST}$) was conducted to evaluated genetic relationships between these varieties. Results: Twenty-three identified haplotypes were classified in six haplogroups (A-E and H) with the majority clustered in haplogroup A and B. Each variety was in multiple haplogroups with haplogroups A, B, D, and E being shared by all studied varieties. The averaged haplotype and nucleotide diversities were, respectively 0.8607 and 0.00579 with non-significant Tajima's D values being observed in all populations. Haplogroup distribution was closely related to that of RJF particularly Gallus gallus gallus (G. g. gallus) and G. g. spadiceus. As denoted by AMOVA, the mean diversity was mostly due to within-population variation (90.53%) while between-population variation (9.47%) accounted for much less. By pairwise $F_{ST}$, LK was most closely related to DA ($F_{ST}=0.00879$) while DA was farthest from CH ($F_{ST}=0.24882$). Conclusion: All 4 Thai indigenous chickens are in close relationship with their potential ancestor, the RJF. A contribution of shared, multiple maternal lineages was in the nature of these varieties, which have been domesticated under neutral selection.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.176-180
• /
• 2002

During the last two decades the laser beam has progressed from a sophisticated laboratory apparatus to an adaptable and viable industrial tool. Especially, in its welding mode, the laser offers high travel speed, low distortion, and narrow fusion and heat-affected zones (HAZ). The principal obstacle to selection of a laser processing method in production is its relatively high equipment cost and the natural unwillingness of production supervision to try something new until it is thoroughly proven. The major objective of this work is focused on the combined features of gas tungsten arc and a low-power cold laser beam. Although high-power laser beams have been combined with the plasma from a gas tungsten arc (GTA) torch for use in welding as early as 1980, recent work at the Ohio State University has employed a low power laser beam to initiate, direct, and concentrate a gas tungsten arcs. In this work, the laser beam from a 7 watts carbon monoxide laser was combined with electrical discharges from a short-pulsed capacitive discharge GTA welding power supply. When the low power CO laser beam passes through a special composition shielding gas, the CO molecules in the gas absorbs the radiation, and ionizes through a process known as non-equilibrium, vibration-vibration pumping. The resulting laser-induced plasma (LIP) was positioned between various configurations of electrodes. The high-voltage impulse applied to the electrodes forced rapid electrical breakdown between the electrodes. Electrical discharges between tungsten electrodes and aluminum sheet specimens followed the ionized path provided by LIP. The result was well focused melted spots.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.561-569
• /
• 2002

Laser has been called a "Quantum Machine" because of its mechanism of generation since the development on July 7,1960.by T.H.Maiman. We can now use this machine as a tool for manufacturing in industries. At present, 45kW CO2 laser, 10kW Nd:YAG laser, 6kW LD pumped YAG laser and 4kW direct diode laser facilities are available for welding a heavy steel plate of 40mm in thickness and for cutting metals at high speed of 140m/min. Laser Materials Processing is no longer a scientific curiosity but a modern tool in industries. Lasers in manufacturing sector are currently used in welding, cutting, drilling, cladding, marking, cleaning, micro-machining and forming. Recently, high power laser diode, 10kW LD pumped YAG laser, 700W fiber laser and excimer laser have been developed in the industrialized countries. As a result of large numbers of research and developments, the modem laser materials processing has been realized and used in all kinds of industries now. In the present paper, metallurgical studies on laser materials processing such as porosity formation, hot cracking and the joint performances of steels and aluminum alloys and dissimilar joint are discussed after the introduction of laser facilities and laser applications in industries such as automotive industry, electronics industry, and steel making industry. The wave towards the use of laser materials processing and its penetration into many industries has started in many countries now. Especially, development of high power/quality diode laser will be accelerate the introduction of this magnificent tool, because of the high efficiency of about 50%, long life time and compact.

• 한국환경복원기술학회지
• /
• 제17권6호
• /
• pp.73-91
• /
• 2014

Recently the countries breeding bears such as China and Vietnam are promoting a policy that gives relief to wild animals through agreement with AAF and WSPA. Currently our country has lacking breeding space for the increased number of bred bears due to the prohibition of bear import and export from joining the CITES in 1992. There needs to be a place that treats, protects accepts breed bears in the terms of animal welfare. The bear park was hoped to be designed as a means to give relief to bears and promote harmony with the local society, and is made of parking area, waiting area, visitors center, treatment research management facilities, restaurants, food warehouse, food store, bear museum, sanitation facilities, gondola, plaza, rehabilitation area for wild animals, outdoor exhibition center, direct indirect experience area of wild animals, resting facilities and areas, photo zones, bear playground, bear experiencing facilities, fences, information facilities, tree protection facilities and more. The design can be used as a reference in examining alternative measures following the future change in breeding policy as a bear park example which reflected the ecology of a bear in the term of animal welfare.