• Journal of Korean Neurosurgical Society
• /
• 제38권5호
• /
• pp.399-402
• /
• 2005

Direct anterior approach for lesions located anterior to the thecal sac is definitely superior to lateral or posterior approach in many respects. However, various anatomical obstacles and technical difficulties often hinder direct anterior approach. Thanks to ripe experience of retroperitoneal approach to the lumbar spine for anterior lumbar interbody fusion and total disc replacement, the authors could perform lumbar corpectomy and reconstruction by using midline retroperitoneal approach recently. During this approach, we repaired anterior longitudinal ligament also to reduce the risk of graft extrusion and to prevent erosion of vascular wall due to direct contact between metallic hardware, which was used for reconstruction of vertebral body, and major vessels.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.96-100
• /
• 2000

It is difficult to predict material behavior of forming process because the plastic instable flow phenomenon happens in practical forming process I. e. upsetting backward extrusion piercing indentation. In view of the direct relationship between instable material flow and quality defects of the products we should find out their phenomena, In this study we introduced the plastic spin and the kinematic hardening considering the kinematic hardening constitutive equation for rate-dependent material. Also analysis of upset forging is carried out using the rigid plastic FEM with Al7075

• 폴리머
• /
• 제36권6호
• /
• pp.761-767
• /
• 2012

본 연구에서는 압출 컴파운딩 공정 및 압축 성형 공정을 이용하여 직하형 LED backlight unit(BLU)용 PC계 확산판을 제조하였다. 광 확산제로 무기 실리카 다공체의 적용을 시도하였으며, 제조된 확산판의 광학 및 열적, 기계적 물성의 변화를 조사하였다. 모폴로지 관찰을 통하여 광 확산제가 압출 공정 중 발생된 높은 전단응력에 의하여 PC 매트릭스 상에서 응집 현상 없이 균일하게 분산되었음을 확인하였다. 실리카 다공체를 보조 확산제로 첨가한 경우 확산판의 위치 및 시야각에 따른 휘도 균일도가 순수 아크릴 비드만을 첨가한 경우에 비해 뚜렷하게 향상되었으며, 반면에 절대휘도의 감소 정도는 매우 낮은 것으로 나타났다. 또한 첨가된 실리카 다공체는 확산판의 열 및 기계적 성질의 개선에도 기여하였다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.406-412
• /
• 2014

In this study, flat-tubular-type alumina filters were manufactured using alumina powder of two sizes ($2.4{\mu}m$ ALM-44 and $0.4{\mu}m$ AP 400) by an extrusion process. The manufactured alumina filter was sintered at $1200-1600^{\circ}C$ for 1 h. As particle size increased, the largest pore size, average pore size and porosity increased; but density and linear shrinkage decreased. The alumina filter fabricated using ALM-44 powder sintered at $1500^{\circ}C$ was confirmed as the best water treatment filter after investigation of the bending strength, water permeability and impurity-removal efficiency of the experimental filters. This flat-tubular-type alumina filter is expected to be useful not only for direct water treatment, but also for use as a support filter during coating processes, to control pore size.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.21-27
• /
• 2012

The optical diffuser for direct-lit LED backlight unit was prepared by using extrusion compounding followed by thermoforming process. Poly(methyl methacrylate) (PMMA) with superior optical characteristics and polycarbonate (PC) with good thermal property were used as base resins, and crosslinked polystyrene (PS) and PMMA beads as diffusing agents were incorporated into resin matrix to derive light scattering and diffusing action. In the compounded plate, the diffusing beads were observed to be dispersed uniformly and distinctly in the continuous phase. The inclusion of polymeric beads up to 3 wt% substantially enhanced the optical characteristics such as luminance, luminance uniformity, haze for the diffuser. Two different diffusers of PC and PMMA-based compound with various compositions were compared in terms of measured optical, thermal, and mechanical properties, which would be expected to be utilized for the industrial application of LED backlight unit.

• 소성∙가공
• /
• 제8권4호
• /
• pp.393-398
• /
• 1999

The plastic instable flow phenomenon happens in practical forming process, I. e. upsetting, backward extrusion, piercing, indentation. And also, it is difficult to control precisely the shape and dimensions of forming process. It is found that instabilities of the process are mainly connected with imperfections in the lubrication, billet eccentricity, inclined punch alignment. In view of the direct relationship between instable material flow and quality defects of the products and for better control of forming operation, we should necessarily find out their phenomena. In this study, we introduced the friction disturbance due to inclined punch angle. Analysis of upset forging is carried out using the rigid plastic FEM and slab method with eccentricity. Also, we considered the buckling parameters of billet with the large aspect ratio in upset forging.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.57-63
• /
• 2009

Interface friction in blanking dies, cold forging and extrusion of aluminum alloys is a major cause of inefficient process. This paper describes an investigation of femtosecond laser texturing for reduction of interface friction on sliding surfaces in forming process. Femtosecond direct writing technology was used to fabricate a laser micro-machined die and to create microgroove patterns with varying size and density on metal forming dies. A systematic approach to find the optimum parameters and computer simulation comparison of friction coefficients are provided to study the relation of friction coefficients and die profiles. In metal forming tests, the effectiveness of various laser-machined patterns for enhancing interface lubrication is determined.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.68-74
• /
• 2002

The FD process is analogous to the direct piston extrusion process where the cold feed filament acts as a piston extruding the molten filament from the heated liquefier through a nozzle. The extruded filament is deposited on top of futureless platform, where the liquefier and the nozzle move in X and Y direction control by computer based on the part geometry. After the first layer, the Z platform indexes down and the next layer get deposited on top of the first layer. the layer by layer building process introduces surface problem. This paper describes effect of slice interval of the parts built by fused deposition modelling rapid prototyping system.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.78-84
• /
• 1999

A compact air-preheating type heat exchanger was developed and tested for the ultra-high temperature heat recovery applications. For the direct use of exhaust gases up to $1200^{\circ}C$, the heat exchanger adopted a ceramic core with high strength and low thermal expansion coefficient less than $1{\times}10^{-6}^{\circ}C^{-1}$. The ceramic core was fabricated by special extrusion and bonding techniques. To minimize thermal stresses in the core, spring-loaded sealing mechanism was designed and successfully installed. 1-pass air flow scheme was adopted for the compactness and cost-savings. The pressure test for the ceramic core showed no failure under 35 kPa and less than 3% leak under 7 kPa. Flue gas simulation system was developed to investigate the performance of the heat exchanger. The test results showed normal operations of the heat exchanger up to $1200^{\circ}C$ of exhaust gases and relatively high heat recovery efficiencies of 31～39% depending upon exhaust gas temperatures..

• 대한관절경학회지
• /
• 제17권1호
• /
• pp.71-75
• /
• 2013

내측 반월상 연골 뿌리 파열은 외상이나 퇴행성으로 생길 수 있으며, 이로 인해 반월상 연골의 돌출, 관절 연골의 손상, 골극의 생성, 내측 관절 간격의 협소를 유발 할 수 있다. 이는 중년이상의 나이에서 주로 발생하며, 외상을 동반하거나 외상없이 생길 수 있다. 본 저자는 13세 청소년에서 야구 경기 도중 발생한 내측 반월상 연골 후각부 뿌리 파열 1예를 경험하였고, 관절경하에 suture anchor를 이용한 직접적 봉합술을 시행하였기에 이를 보고하고자 한다.