• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.148-150
• /
• 2001

Solid-phase microextraction (SPME) was investigated to understand the BTEX extraction behavior of SPME in groundwater. Analytical procedure was conducted In both conventional and headspace mode. And the conventional direct extraction method and the headspace analysis method were compared. Data obtained with direct and headspace SPME were very similar and showed successful results. In headspace analysis, the linearity was better and RSD (relative standard deviation, %) was smaller than direct extraction.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제50권4호
• /
• pp.189-196
• /
• 2024

Objectives: This study aimed to evaluate the association between use of direct oral anticoagulants (DOACs) and post-extraction bleeding and to quantify bleeding risk in patients receiving DOACs. Materials and Methods: The study included 293 patients who were taking DOACs and underwent tooth extraction (414 teeth). The patients were divided into those who had the extraction while taking DOACs and those who discontinued DOACs before the extraction. Bleeding complications were recorded and compared between the patient groups and types of DOACs. Results: Of the 293 patients, 12 patients (6.9%) had post-extraction bleeding. Post-extraction bleeding occurred in 12 of the 414 tooth extraction sites. Among the 246 patients who underwent dental extraction while continuing DOAC therapy, 12 patients (8.5%) had post-extraction bleeding. Among the 47 patients who underwent dental extraction after discontinuing the administration of DOACs, none reported post-extraction bleeding. There was no significant difference in the number of patients with post-extraction bleeding between the two groups (P=0.122). Conclusion: Continuing DOAC therapy during dental extraction does not increase post-extraction bleeding tendency. These results are consistent with those of previous studies.

• 한국식품영양과학회지
• /
• 제35권2호
• /
• pp.248-253
• /
• 2006

식품내의 비타민 E를 분석하는 방법은 여러 가지 방법이 있으나 최근에는 비타민 E의 8가지 동족체를 모두 분석할 수 있는 HPLC 방법 이 가장 많이 이용되고 있다. 비타민 E를 분석함에 있어 가장 중요한 과정은 식품으로부터 비타민 E를 추출하는 과정이며 검화방법, 직접용매추출법, Soxhlet 추출법 등이 이용되고 있다. 본 연구에서는 곡류 14종을 대상으로 세 가지 추출방법을 비교하였으며 직접용매추출법과 Soxhlet 추출법을 이용하였을 경우 검화방법보다 높은 분석치를 얻을 수 있었다. 곡류에서의 비타민 E의 함량을 측정한 결과를 a-TE로 나타내었으며 흑미에서 5.12 a-TE/100g으로 가장 높았고 기장에서 0.32 a-TE/100 g으로 가장 낮은 함량을 나타내었다.

• BMB Reports
• /
• 제40권3호
• /
• pp.444-447
• /
• 2007

Polymerase chain reaction (PCR) is a powerful technique in molecular biology and is widely used in various fields. By amplifying DNA fragments, PCR has facilitated gene cloning procedures, as well as molecular genotyping. However, the extraction of DNA from samples often acts as a limiting step of these reactions. In particular, the extraction of PCR-compatible genomic DNA from higher plants requires complicated processes and tedious work because plant cells have rigid cell walls and contain various endogenous PCR inhibitors, including polyphenolic compounds. We recently developed a novel solution, referred to as AnyDirect, which can amplify target DNA fragments directly from whole blood without the need for DNA extraction. Here, we developed a simple lysis system that could produce an appropriate template for direct PCR with AnyDirect PCR buffer, making possible the direct amplification of DNA fragments from plant leaves. Thus, our experimental procedure provides a simple, convenient, non-hazardous, inexpensive, and rapid process for the amplification of DNA from plant tissue.

• Wind and Structures
• /
• 제35권5호
• /
• pp.323-336
• /
• 2022

This study investigates the applicability of the direct identification of flutter derivatives in the time domain using Rational Function Approximation (RFA), where the extraction procedure requires either a combination of at least two wind speeds or one wind speed. In the frequency domain, flutter derivatives are identified at every wind speed. The ease of identifying flutter derivatives in the time domain creates a paradox because flutter derivative patterns sometimes change in higher-order polynomials. The first step involves a numerical study of RFA extractions for different deck shapes from existing bridges to verify the accurate wind speed combination for the extraction. The second step involves validating numerical simulation results through a wind tunnel experiment using the forced vibration method in one degree of freedom. The findings of the RFA extraction are compared to those obtained using the analytical solution. The numerical study and the wind tunnel experiment results are in good agreement. The results show that the evolution pattern of flutter derivatives determines the accuracy of the direct identification of RFA.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.213-221
• /
• 2004

최근에, 평활용 직류 커패시터가 설치된 다이오드 정류기가 가전제품 및 교류 운전 장치와 같은 전자 장치에 점점 많이 사용되고 있고, 이러한 부하에 의해서 발생하는 고조파 문제가 점차 중요한 문제로 부각되고 있다. 또한, 3상 4선식 전력 시스템은 상업용 빌딩이나 제조 플랜트 등에 전력을 공급하는 방법으로 많이 사용되고 있는데 이러한 시스템에서는 중성선에 과도한 전류가 흐르게 되고, 중성선 전류는 기본적으로 3고조파 성분으로 중성선 도체 사이즈 선정의 실패나 중성점의 전위를 상승시키거나 변압기의 과열 현상 등을 유발할 수 있다. 이러한 관점에서 본 논문에서는 직접 보상전압 추출기법으로 동작하는 직렬 형 능동 필터를 제안하며, 성능함수 알고리즘의 장점은 게인을 곱하지 않고 보상 전압을 직접 구함으로써, 어떠한 다른 알고리즘보다 보상 전압 계산 방법이 간단하다. 제안된 알고리즘의 타당성을 증명하기 위하여 프로토타입 능동 필터를 제작하여 실험을 수행하였다.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.565-569
• /
• 2009

This study was conducted to evaluate the effects of different preparation methods on the recovery and quantification of ginsenosides in raw Korean ginseng (Panax ginseng C.A. Meyer). Eight major ginsenosides ($Rb_1$, $Rb_2$, $Rb_3$, Rc, Rd, Re, Rf, and $Rg_1$) were analyzed by high performance liquid chromatography (HPLC), after which the recovery and repeatability of the extraction of those ginsenosides using 3 different preparation methods were compared [A. direct extraction (DE) method, hot MeOH extraction/evaporation/direct dissolution; B. solid phase extraction (SPE) method, hot MeOH extraction/evaporation/dissolution/$C_{18}$ cartridge adsorption/MeOH elution; C. liquid-liquid extraction (LLE) method, hot MeOH extraction/evaporation/dissolution/n-BuOH fractionation]. Use of the DE method resulted in a significantly higher recovery of total ginsenosides than other methods and a relatively clear peak resolution. Use of the SPE and LLE methods resulted in clearer peak resolution, but lower ginsenoside recovery than the DE method. The LLE method showed the lowest ginsenoside recovery and repeatability among the 3 methods. Given that the DE method employed only extraction, evaporation, and a dissolution step (avoiding complicate and time consuming purification), this technique may be an effective method for the preparation and quantification of ginsenosides from raw Korean ginseng.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.691-699
• /
• 2009

This paper presents the analysis of series active power filter for reactive power compensation, load balancing, harmonic elimination, and neutral current eradication in three-phase four-wire power systems. Generally, the three-phase four-wire system is widely employed in distributing electric energy to several office building and manufacturing plants. In such systems, the third harmonic and its 3rd harmonics are termed as triple and zero sequence components that do not cancel each other in the system neutral. Consequently, the triple harmonics add together creating a primary source of excessive neutral current. Regarding this concern, this paper presents a new control algorithm for a series hybrid active system, whereas the control approach it adopts directly influence its compensation characteristics. Hence, the advantage of this control algorithm is the direct extraction of compensation voltage reference without phase transformations and multiplying harmonic current value by gain and the required rating of the series active filter is much smaller than that of a conventional shunt active power filter. In order to show the effectiveness of the proposed control algorithm, experiments have been carried out.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.1-6
• /
• 2004

RFIC를 위한 Nanoscale MOSFET에서의 유효 게이트 저항을 직접 추출법으로 추출하여 다양한 게이트 길이에 대해 분석하였다. 추출된 유효 게이트 저항은 비교적 정확하면서 간소화된 모델을 통한 측정결과와 비교하여 10GHz 대역까지 잘 일치함을 확인하였다. 같은 공정기술로 제작된 소자들 중에서 reverse short channel 효과가 생기지 않는 긴 채널 MOSFET 소자의 경우에 일반적인 유효 게이트 저항에서와는 다른 인가전압 및 주파수 종속성을 가짐을 확인하였다. 특히, 문턱전압을 전후하여 주파수에 따라 상이한 결과를 나타내고 있으며, 게이트 인가전압이 문턱전압에 가까울 때 비이상적으로 큰 유효 게이트 저항값을 나타내었다. 이러한 특성은 직접추출법을 사용하는 RF MOSFET 모델링에 있어서 참고해야 할 중요한 특성이 될 것이다.