• Advances in concrete construction
• /
• 제8권4호
• /
• pp.247-255
• /
• 2019

Several reinforced concrete structures that get deteriorated by rebar corrosion are retrofitted using Carbon Fiber Reinforced Polymer (CFRP). When rebar comes in direct contact with CFRP, rebar may corrode, as iron is more active than carbon. Progression of corrosion of rebar in strengthened RC structures has been carried out when rebar comes in direct contact with CFRP. The experimentation is carried out in two phases. In phase I, corrosion of bare steel bar is monitored by making its contact with CFRP. In phase II, concrete specimens with surface bonded CFRP were casted and subjected to the realistic exposure conditions keeping direct contact between rebar and CFRP. Progression of corrosion has been monitored by various parameters: Half-cell potential, Tafel extrapolation and Linear Polarisation Resistance. On termination of exposure, to find residual bond stress between rebar and concrete, pull-out test was performed. Rebar in contact with CFRP has shown substantially higher corrosion. The level of corrosion will be more with more area of contact.

• 한국환경성돌연변이발암원학회지
• /
• 제19권2호
• /
• pp.95-101
• /
• 1999

Risk Assessment is an important area in toxicology and the methodology for risk assessment has been developed. Mathematical models used for risk assessment include one-hit multi-hit, two-stage, probit logistic, multistage, and linearized multistage models. For the assessment of exposure dose, environmental monitoring has been applied, but it has limitation to accurately assess exposure level because the levels in the air, water, foods, and soil may vary depending on time of sampling. In addition, humans can be exposed to various sources of exposure and thus it will be impossible to estimate the total level of exposure in humans by environmental monitoring. To eliminate the limitation of environmental monitoring, a direct measurement of toxic materials or modified biomolecules (called biomarkers) associated with the exposure of toxic materials is needed. Here, scientific basis of biomarkers and future direction have been considered for the assessment of carcinogen exposure and cancer risk in humans.

• 한국컴퓨터정보학회논문지
• /
• 제22권3호
• /
• pp.123-129
• /
• 2017

This study intends examine the relevance of factors with negative influences on anti-social sexual awareness formation in adolescents as per the concern of the parents of families with adolescents, as internet pornography exposure in adolescents lead to excessive indulgence in pornographic photographs, cartoons, videos, or fictions, or in video chatting with exposure of one's own body parts. For this, the factors of internet pornography exposure in the study subjects of adolescents were constructed into a multilateral model, and the structural equation model was analyzed. As the result of the study, the following conclusion were drawn. First, the most powerful factor influencing the anti-social sexual awareness in adolescents was, contrary to the concern of many, not the exposure to pornography through internet media, but personal characteristics such as sensation-seeking tendency and socio-environmental characteristic of differential association. Second, it is worth noting that the most major factor influencing intentional internet pornography exposure by adolescents is another form of pornography exposure. Third, whether intentional or unintentional, the internet-related variable influencing the internet pornography exposure was found to be the amount of internet usage. Fourth, the unintended internet pornography exposure was found to have no direct influence on the sexual awareness of adolescents, but it did have an indirect influence on sexual awareness mediated by intentional internet pornography exposure and existing-media pornography exposure. Based on these study results, the conclusion was drawn regarding the influence of internet pornography on sexual awareness in adolescents.

• 한국대기환경학회지
• /
• 제24권3호
• /
• pp.357-366
• /
• 2008

In this study, the analytical performance of trimethylamine (TMA) were investigated with respect to headspace-solid phase microextraction (HS-SPME) method. In order to induce the elution of aqueous TMA to headspace, NaOH was added as a decomposition reagent to aqueous TMA standard. By controlling the combination of three major variables for TMA extraction, the extent of extraction was compared between the two contrasting conditions for each variable (i.e., reaction time (long (L) vs short (S)), exposure temperature (30 vs $50^{\circ}C$), and exposure time (10 vs 30 min)). The results of this comparative analysis showed that the extraction efficiency for all eight types of HS-SPME combinations decreased on the order: L-30-30>L-50-10>L-30-10>L-50-30>S-30-30>S-50-30>S-50-10>S-30-10. The effect of reaction time appeared to exert significant influences on the relative recovery rate of HS-SPME at 90% confidence level. However, the effects of exposure temperature or exposure time were not so significant as reaction time. When the recovery rate of HS-SPME is compared against the direct injection of liquid standard into GC injector, it recorded as 2%. According to this comparative study, the reaction conditions for HS-SPME application can exert significant influences on the analysis of TMA.

• 한국산업보건학회지
• /
• 제26권3호
• /
• pp.301-306
• /
• 2016

Objectives: Direct-reading instrument(Photoionization detectors, PID) and quantitative analysis using active type air sampling (Gas chromatography-flame ionization detector, GC-FID) were tested to evaluate their ability to detect volatile organic compounds(VOCs) in a semiconductor manufacturing plant. Methods: The organic compounds used were acetone and ethanol which are normally used as cleaning solutions in the semiconductor manufacturing. The evaluation was based on the preparation of test solutions of known acetone and ethanol concentration in a chamber($600{\times}600{\times}1150mm$). Samples were prepared that would be equivalent to 5~100 ppm for acetone and 10~ 200 ppm ethanol. GC-FID and PID were evaluated simultaneously. Quantitative analysis was performed after sampling and the direct-reading instrument was checked using real-time data logging. Results: Positive correlations between PID and GC-FID were found for acetone and ethanol at 0.04~2.4% for acetone(TLV: 500 ppm) and 0.1~8.3% for ethanol(TLV: 1000 ppm). When the sampling time was 15 min, concentration of test solution was the most similar between measurement methods. However, the longer the sampling time, the less similar the results. PID and GC-FID had similar exposure patterns. Conclusions: The results indicate that PID and GC-FID have similar exposure pattern and positive correlation for detection of acetone and ethanol. Therefore, PID can be used for exposure monitoring for VOCs in the semiconductor manufacturing industry. This study has significance in that it validates measuring occupational exposure using a portable device.

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.111-119
• /
• 2018

Purpose: This study was conducted to evaluate the accuracy of linear measurements of 3-dimensional (3D) images generated by cone-beam computed tomography (CBCT) and facial scanning systems, and to assess the effect of scanning parameters, such as CBCT exposure settings, on image quality. Materials and Methods: CBCT and facial scanning images of an anthropomorphic phantom showing 13 soft-tissue anatomical landmarks were used in the study. The distances between the anatomical landmarks on the phantom were measured to obtain a reference for evaluating the accuracy of the 3D facial soft-tissue images. The distances between the 3D image landmarks were measured using a 3D distance measurement tool. The effect of scanning parameters on CBCT image quality was evaluated by visually comparing images acquired under different exposure conditions, but at a constant threshold. Results: Comparison of the repeated direct phantom and image-based measurements revealed good reproducibility. There were no significant differences between the direct phantom and image-based measurements of the CBCT surface volume-rendered images. Five of the 15 measurements of the 3D facial scans were found to be significantly different from their corresponding direct phantom measurements(P<.05). The quality of the CBCT surface volume-rendered images acquired at a constant threshold varied across different exposure conditions. Conclusion: These results proved that existing 3D imaging techniques were satisfactorily accurate for clinical applications, and that optimizing the variables that affected image quality, such as the exposure parameters, was critical for image acquisition.

• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.525-533
• /
• 2015

Objectives: Alongside smoking, occupational exposure is an important risk factor for chronic obstructive pulmonary disease. The purpose of this study was to evaluate factors associated with occupational pulmonary function decline that can be used to create guidelines for the health management of shipyard workers Materials: This study analyzed spirometry from 10,597 male shipbuilding workers. Functional decline in spirometry was defined as FEV1/FVC <70% and logistic regression for work duration and occupational hazard exposure was performed Results: Among the subjects, 4.2% showed an obstructive pattern in pulmonary function. The odds ratios for hazard exposure were 1.67(indirect) and 3.54(direct), and for work duration 1.97(10-18 years), 2.29(19-27), and 5.02(28+). After adjusting for smoking and work-related factors, the odds ratios for work durations of over 10 years were 1.73(10-18 years), 1.99(19-27), and 4.09(28+), but for hazards exposure was 1.71(direct) alone after adjustment. Conclusions: Occupational COPD is insidious and chronic, and thus long-term hazard exposed(especially over 10 years) shipyard workers with functional decline in spirometry need to prevent and manage COPD. This study is important for establishing guidelines to manage hazard exposure among shipyard workers and prevent COPD.

• 한국환경보건학회지
• /
• 제49권1호
• /
• pp.1-10
• /
• 2023

Low-dose radiation exposure has received considerable attention because it reflects the general public's type and level of exposure. Still, controversy remains due to the relatively unclear results and uncertainty in risk estimation compared to high-dose radiation. However, recent epidemiological studies report direct evidence of health effects for various types of low-dose radiation exposure. In particular, international nuclear workers' studies, CT exposure studies, and children's cancer studies on natural radiation showed significantly increased cancer risk among the study populations despite their low-dose radiation exposure. These studies showed similar results even when the cumulative radiation dose was limited to an exposure group of less than 100 mGy, demonstrating that the observed excess risk was not affected by high exposure. A linear dose-response relationship between radiation exposure and cancer incidence has been observed, even at the low-dose interval. These recent epidemiological studies include relatively large populations, and findings are broadly consistent with previous studies on Japanese atomic bomb survivors. However, the health effects of low-dose radiation are assumed to be small compared to the risks that may arise from other lifestyle factors; therefore, the benefits of radiation use should be considered at the individual level through a balanced interpretation. Further low-dose radiation studies are essential to accurately determining the benefits and risks of radiation.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.90-98
• /
• 2017

The purpose of this study was to examine the effect of employment type(direct employment, dispatch and service supplier) on risk factor exposure, health and satisfaction. The data of the 4th wave of Korean Working Conditions Survey (KWCS) conducted by Korea Occupational Safety and Health Agency (KOSHA) in South Korea was used. Business support service industry and manufacturing industry were selected as appropriate industries for analysis. In the final analysis, 5,865 in the manufacturing industry and 1,361 in the service support industry were included. Various variables related risk, safety, satisfaction and health such as risk factor exposure, MSDs exposure, work environment satisfaction, injury probability, dangerous work, workload, physical health problem, perceived health, positive emotions, stress, participation for decision making and experience of accident/disease were analyzed and company size and age was controled. An ANCOVA was conducted to identify significant mean differences of risk, safety, satisfaction and health related variables among direct employed workers, dispatch and service supplier workers. The results showed that all the variables except stress showed a significant difference depending on employment type in the service supply industry. In the manufacturing industry, there were significant difference in the risk factor exposure, MSDs exposure, work environment satisfaction, workload, physical health problem, perceived health, and participation depending on employment type. These results indicated that the risks are unloaded to subcontract and outsourcing company workers. Based on these results, the implications of this study and suggestions for future research were discussed.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.269-271
• /
• 2002

It is reported that exposure for the patient and the medical staff from IVR is large. Direct measurement of patient exposure is difficult, since the measurement disturbs reading of images. The fluorescence glass-dosimeter system consisting of small-size glass chips is developed in recent years. Owing to its small size and physical characteristics, direct monitoring of surface dose may be feasible. The dose measurement for patient and medical staff during head interventional radiology (IVR) examinations was tried by using the fluorescence glass-dosimeter system. A dose response of the glass dosimeter is almost linear in large dose range but its energy dependency is high. About 20% variation of sensitivity was observed in the effective energy of 45-60keV which was used in IVR. In spite of this shortcoming, the fluorescence glass-dosimeter system is a convenient means for a dose monitoring during IVR performance.