• 대한전자공학회논문지SD
• /
• 제38권5호
• /
• pp.338-346
• /
• 2001

온도에 따른 반도체 에너지갭의 변화를 디지털 영상처리를 이용해 직접 측정하는 적외선 영상기법을 제안하고 있다. 본 방법은 반도체 에너지갭의 온도계수를 경제적이고 간단하게 평가할 수 있도록 한다. 본 기법의 핵심 구성 부품은 다색광원기(Polychromator), 프레임 그래버가 내장된 컴퓨터 및 가변 온도 저온유지장치(Cryostat)이다. 방법의 타당성을 검증하기 위해 LEC 방법으로 제조한 GaAs에 시험적으로 행한 실험은 온도 계수가 이론 모델에서 구한 값과 전반적으로 잘 일치함을 보여 주었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2356-2361
• /
• 2003

Proteome research in the medical field is expected to accelerate the understanding of disease mechanism, and to create new diagnostic concept. For protein profiling, this paper proposes a new methodology named CPDIB (Crude Protein Direct Blotting). In the CPDIB procedure, crude protein sample is directly immobilized on a membrane and the expression of protein molecules in the sample are analyzed quantitatively by using a special device called ImmobiChip, where the membrane is used as a field of the immune reaction. The over-all structure of the ImmobiChip is based on the conventional Slot blot device. Mechanical improvement in the air-tightness of the case holding the membrane realizes the direct blotting and results in high performance of stability in the immune reaction. In the measurement of multiple proteins, a dispensing robot is used for increasing the efficiency of handling of liquid. Cooperation of the dispensing robot with the ImmobiChip for immobilizing proteins realizes automated and stable performance of the CPDIB procedure. This paper shows the evaluation of the air-tightness of the ImmobiChip, the ability of analyzing proteins using the CPDIB procedure and the performance of the automated equipment.

• 한국의류학회지
• /
• 제37권8호
• /
• pp.1075-1094
• /
• 2013

This study analyzed the lower body type of women aged 20 to 30 to understand their respective characteristics. The research method was restricted to the use of direct measurements data and 3D measurements data of the Sixth Size Korea. Factor analysis, cluster analysis, ANOVA, Duncan's test, discriminant analysis, t-test, and ${\chi}^2$-test were performed for the statistical analysis of the data using SPSS Win 20.0 program. The results of this study are as follows. Lower body type based on 3D measurements were classified into 3 types (obese lower body, long lower body, and small lower body). Lower body type based on direct measurements were classified into 3 types (obese lower body, thick and long lower body, and small lower body). Lower body type based on the direct measurement of sitting pose were classified into 3 types (obese lower body, long and thin lower body, and short lower body). The age differences in the lower body types could be analyzed by an evaluation of the 3D simulation of the lower body.

• Environmental Analysis Health and Toxicology
• /
• 제30권sup호
• /
• pp.6.1-6.4
• /
• 2015

Objectives This study is conducted to estimate the cost paid by the public suffering from disease possibly caused by chemical and to examine the effect on public health. Methods Cost-benefit analysis is an important factor in analysis and decision-making and is an important policy decision tool in many countries. Cost-of-illness (COI), a kind of scale-based analysis method, estimates the potential value lost as a result of illness as a monetary unit and calculates the cost in terms of direct, indirect and psychological costs. This study estimates direct medical costs, transportation fees for hospitalization and outpatient treatment, and nursing fees through a number of patients suffering from disease caused by chemicals in order to analyze COI, taking into account the cost of productivity loss as an indirect cost. Results The total yearly cost of the diseases studied in 2012 is calculated as 77 million Korean won (KRW) per person. The direct and indirect costs being 52 million KRW and 23 million KRW, respectively. Within the total cost of illness, mental and behavioral disability costs amounted to 16 million KRW, relevant blood immunological parameters costs were 7.4 million KRW, and disease of the nervous system costs were 6.7 million KRW. Conclusions This study reports on a survey conducted by experts regarding diseases possibly caused by chemicals and estimates the cost for the general public. The results can be used to formulate a basic report for a social-economic evaluation of the permitted use of chemicals and limits of usage.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.122-128
• /
• 2015

PURPOSE. To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (${\alpha}$=.05), respectively. RESULTS. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION. Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (< $120{\mu}m$). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.627-636
• /
• 2009

본 연구는 강구조 설계기준에서 제시하고 있는 하중증폭계수를 적용한 2차 해석법의 타당성을 해석적 방법을 통해 평가하는데 그 목적이 있다. 이를 위해 KBC 2005에서 제안하고 있는 B1 및 B2 계수를 적용한 2차 해석과 KBC 2009(안)에서 제안하고 있는 하중증폭계수를 적용한 직접해석을 3층 1스팬 및 5층 3스팬 비가새 강구조 골조에 대해 실시하고, 그 해석 결과를 2차 비선형 해석 결과와 비교하여 기준에서 제안된 2차 해석법들을 평가하였다. 해석의 주요 변수로는 골조의 규모, 기둥의 축력비, 해석방법 등이 적용되었다. 연구 결과 고축력 조건시 KBC 2005에서 제안된 하중증폭계수를 적용한 2차 해석은 2차 효과의 영향을 적절하게 고려하지 못하나 KBC 2009(안)에서 제안된 직접해석법의 경우 적절한 수준에서 2차 효과를 고려하고 있는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.368-374
• /
• 2007

CVD-SiC coating has been introduced as a protective layer in TRISO nuclear fuel particle of high temperature gas cooled reactor (HTGR) due to its excellent mechanical stability at high temperature. In order to prevent the failure of the TRISO particles, it is important to evaluate the fracture strength of the SiC coating layer. It is needed to develop a new simple characterization technique to evaluate the mechanical properties of the coating layer as a pre-irradiation step. In present work, direct strength measurement method with the specimen of hem i-spherical shell configuration was suggested. The indentation experiment on a hemisphere shell with a plate indenter was conducted. The fracture strength of the coating layer is related with the critical load for radial cracking of the shell. The finite element analysis was used to drive the semi-empirical equation for the strength measurement. The SiC hemispherical shells were successfully recovered from the section-grinding of TRISO coated particle and successive heat treatment in air. The strength of CVD-SiC coating layer was evaluated from the experimentally measured critical load during the indentation on SiC hemisphere shell. Weibull diagram of fracture strength was also constructed. This study suggested a new strength equation and experimental method to measure the fracture strength of CVD-SiC coating of TRISO coated fuel particles.

• 대한안전경영과학회지
• /
• 제16권1호
• /
• pp.119-127
• /
• 2014

This study tried to develop a basis for quantitative index of working postures associated with WMSDs (Work-related Musculoskeletal Disorders) that could overcome realistic restriction during application of typical checklists for WMSDs evaluation. The baseline data(for a total of 603 jbs) for this study was obtained from automobile manufacturing company. Specifically, data for back posture was analyzed in this study to have a better and more objective method in terms of job relevance than typical methods such as OWAS, RULA, and REBA. Major statistical tools were clustering, logistic regression and so on. The main results in this study could be summarized as follows; 1) The relationship between working posture and WMSDs symptom at back was statistically significant based on the results from logistic regression, 2) Based on clustering analysis, three levels for WMSDs risk at back were produced for flexion as follows: low risk(< $18.5^{\circ}$), medium risk($18.5^{\circ}{\sim}36.0^{\circ}$), high risk(> $36.0^{\circ}$), 3) The sensitivities on risk levels of back flexion was 93.8% while the specificities on risk levels of back flexion was 99.1%. The results showed that the data associated with back postures in this study could provide a good basis for job evaluation of WMSDs at back. Specifically, this evaluation methodology was different from the methods usually used at WMSDs study since it tried to be based on direct job relevance from real working situation. Further evaluation for other body parts as well as back would provide more stability and reliability in WMSDs evaluation study.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.688-695
• /
• 2005

The aim of this study is to develop a procedure to estimate the wind loads from the accelerations of a tall building structure. The wind loads may be directly calculated using the inverse analysis or simply integrating the wind pressures of the overall structure. But, these methods are too expensive and impossible to implement in some cases. In this study, a simple method is proposed to estimate the wind loads using the Kalman filter. This method is very stable compared to the direct integration of the acceleration to get the velocity or displacement. The proposed method is verified thorough numerical analysis, and results show that the proposed method is robust and estimates the wind loads accurately.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.190-197
• /
• 2005

To monitor the safety and serviceability of a structures, structural responses including displacements due to various design and unexpected loadings must be measured. The maximum displacement and its distributions of a structure can be used as a direct assessment index on its stiffness. For this reason, there have been diversely studied on measuring of the maximum displacement of a structure. However, there is no practical method for measuring displacement of a structure. Therefore, in this paper, new displacement measuring method is developed and accuracy of LiDAR is examined in detail for development of a new method for measuring displacement of a structure.