• 한국멀티미디어학회논문지
• /
• 제24권2호
• /
• pp.167-177
• /
• 2021

In the field of augmented reality, edge-based methods have been popularly used in tracking textureless 3D objects. However, edge-based methods are inherently vulnerable to cluttered backgrounds. Another way to track textureless or poorly-textured 3D objects is to directly align image intensity of 3D object between consecutive frames. Although the direct methods enable more reliable and stable tracking compared to using local features such as edges, they are more sensitive to occlusion and less accurate than the edge-based methods. Therefore, we propose a method that combines an edge-based method and a direct method to leverage the advantages from each approach. Experimental results show that the proposed method is much robust to both fast camera (or object) movements and occlusion while still working in real time at a frame rate of 18 Hz. The tracking success rate and tracking accuracy were improved by up to 84% and 1.4 pixels, respectively, compared to using the edge-based method or the direct method solely.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2464-2476
• /
• 2021

Direct-contact heat transfer of a single saturated droplet upon colliding with a heated wall in the regime of film boiling was experimentally investigated using high-resolution infrared thermometry technique. This technique provides transient local wall heat flux distributions during the entire collision period. In addition, various physical parameters relevant to the mechanistic modelling of these phenomena can be measured. The obtained results show that when single droplets dynamically collide with a heated surface during film boiling above the Leidenfrost point temperature, typically determined by droplet collision dynamics without considering thermal interactions, small spots of high heat flux due to localized wetting during the collision appear as increasing We_n. A systematic comparison revealed that existing theoretical models do not consider these observed physical phenomena and have lacks in accurately predicting the amount of direct-contact heat transfer. The necessity of developing an improved model to account for the effects of local wetting during the direct-contact heat transfer process is emphasized.

• 한국정보처리학회논문지
• /
• 제4권9호
• /
• pp.2403-2411
• /
• 1997

Direct3D는 새로운 3차원 그래픽 가속기로써, 이를 이용하여 보다 쉽게 윈도우용 그래픽 프로그램을 제작할 수가 있다. 여기서는 Direct3D를 이용하여 제작한 프랙탈 지형 데이터 모델 뷰어를 제시한다. 지형 모델 뷰어 제작에 따른 클래스의 정의, 입력을 위한 대화상자의 설계, 초기화 과정, 프로그램의 실행과정을 설명하고 지형 모델 뷰어의 실행으로 얻어진 결과중, 철사형, 솔리드형, 포인트형의 출력을 보인다. 지형 형상화의 결과를 보이기 위하여, 여기서는 프랙탈 격자형 중간점 이동 알고리즘에 의하여 만들어진 데이터를 사용하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.607-614
• /
• 2010

Shear behavior of granular soils largely affects the safety and stability of underground and earth structures. This study presents the characteristics of shear zone in a direct shear test using shear wave and electrical resistivity measurements. An innovative direct shear box made of transparent acrylic material has been developed to prevent direct electric current. Bender elements and electrical resistivity probe are embedded in the wall of direct shear box to estimate the shear wave velocities and the electrical resistivity at the shear and non-shear zones. Experimental results show that the void ratio and shear wave velocity at shear zone increase during shearing while the values remain constant at non-shear zone. The results demonstrate correlation among the contact force, small strain shear modulus, and void ratio at shear zone. This study suggests that the application of the modified direct shear box including shear wave and electrical resistivity measurements may become an effective tool for analyzing soil behavior at shear zone.

• 한국전자파학회논문지
• /
• 제28권5호
• /
• pp.426-429
• /
• 2017

W-대역 원격탐사용 라디오미터 구현을 위하여 direct detection 방식의 구조를 가지는 수신기를 설계하였으며, 통신 또는 레이다 수신기 구조와 다르게 저 잡음이면서 60 dB 이상의 고이득을 가지도록 제작하였다. 라디오미터 수신기는 W-대역에서 동작하는 4단의 고이득 저잡음 증폭기와 대역폭 필터, square law detector로 구성되었으며, 제작된 연구 결과를 제시하였다. 개발된 direct detection 수신기는 94 GHz의 입력 주파수와 약 4 GHz의 대역폭, 그리고 56 dB 이득과 입력신호가 -20 dBm 경우 적분기 출력단에서 4,500 mV/mW의 감도를 보여주고 있다.

• 한국음향학회지
• /
• 제37권3호
• /
• pp.139-146
• /
• 2018

단상태 소나는 음원의 송신시간과 반사파의 수신시간 정보를 이용하여 표적의 위치를 산출한다. 그러나 음원의 송신시간 정보를 수신센서와 공유하지 않는 비동기 양상태 소나 시스템에서는 표적의 위치를 산출하기 위해 수신센서에서 음원의 직접파(direct blast)를 탐지해야한다. 본 논문에서는 직접파에 대한 PRI(Pulse Repetition Interval)와 적응적인 임계치 추정을 통해 직접파 탐지를 수행하는 기법을 제안한다. 모의 신호 및 해상 실험 데이터를 이용하여 제안하는 기법의 성능을 분석하였고 그 결과 강한 배경소음 및 직접파와 유사한 다수의 표적 반사파가 존재하는 환경에서도 강인한 직접파 탐지 성능을 보여주었다.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1199-1203
• /
• 2012

H.264 adopted many compression tools to increase image data compression efficiency such as B frame bi-directional predictions, the direct mode coding and so on. Despite its high compression efficiency, H.264 can suffer from its long coding time due to the complicated tools of H.264. To realize a high performance H.264, several fast algorithms were proposed. One of them is adaptive fast direct mode decision algorithm using mode and Lagrangian cost prediction for B frame in H.264/AVC (MLP) algorithm which can determine the direct coding mode for macroblocks without a complex mode decision process. However, in this algorithm, macroblocks not satisfying the conditions of the MLP algorithm are required to process the complex mode decision calculation, yet suffering a long coding time. To overcome the problem, this paper proposes a fast direct mode prediction algorithm. Simulation results show that the proposed algorithm can determine the direct mode coding without a complex mode decision process for 42% more macroblocks and, this algorithm can reduce coding time by up to 23%, compared with Jin's algorithm. This enables to encode B frames fast with a less quality degradation.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1450-1458
• /
• 2018

Commutation failures can deteriorate the availability of high-voltage direct current (HVDC) links and may lead to outage of the HVDC system. Most commutation failures are caused by voltage reduction due to ac system faults on inverter side. The commutation failure process can be divided into two stages. The first stage, from the occurrence to the clearing of faults, is called 'Deterioration Stage'. The second stage, from the faults clearing to restoring the power system stability, is called 'Recovery Stage'. Based on the analysis of the commutation failure process, this paper proposes a direct-current fuzzy controller including prevention and recovery controller. The prevention controller reduces the direct current to prevent Commutation failures in the 'Deterioration Stage' according to the variation of ac voltage. The recovery controller magnifies the direct current to speed up the recovery of power system in the 'Recovery Stage', based on the recovery of direct voltage. The validity of this proposed fuzzy controller is further proved by simulation with CIGRE HVDC benchmark model in PSCAD/EMTDC. The results show the commutation failures can be mitigated by the proposed direct-current fuzzy controller.

• Korean Journal of Mathematics
• /
• 제23권4호
• /
• pp.557-569
• /
• 2015

We dene a fuzzy lattice as a fuzzy relation, develop some basic properties of the fuzzy lattice, show that the operations of join and meet in fuzzy lattices are isotone and associative, characterize a fuzzy lattice by its level set, and show that the direct product of two fuzzy lattices is a fuzzy lattice.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3282-3287
• /
• 2007

Lean combustion is one of the most promising method for increasing engine efficiency and reducing the exhaust emission from SI gas engines. Due to the possibility of partial burn and misfire, however, under lean burn operation, stable flame kernel formation and fast burn rate are needed to guarantee a successful subsequent combustion. Experiment data were obtained on a single-cylinder CNG fueled SI engine to investigate the effect of direct injection, spark timing and variation of injection timing. Experimental results show that lean burn limit is ${\lambda}$=1.3 with port injection, and expansion of lean burn limit ${\lambda}$=1.4 with direct injection method, due to increase of turbulence intensity in cylinder and stratified charge. Combustion duration in lean region is improved by using the variation of injection timing.