• Nuclear Engineering and Technology
• /
• v.29 no.1
• /
• pp.45-57
• /
• 1997

The direct contact condensation phenomenon, which occurs when steam is injected into the subcooled water, has been experimentally investigated. Two plume shapes in the stable condensation regime are found to be conical and ellipsoidal shapes depending on the steam mass flux and the liquid subcooling. Divergent plumes, however, are found when the subcooling is relatively small. The measured expansion ratio of the maximum plume diameter to the injector inner diameter ranges from 1.0 to 2.3. By means of fitting a large amount of measured data, an empirical correlation is obtained to predict the steam plume length as a function of a dimensionless steam mass flux and a driving potential for the condensation process. The average heat transfer coefficient of direct contact condensation has been found to be in the range 1.0~3.5 ㎿/$m^2$.$^{\circ}C$. Present results show that the magnitude of the average condensation heat transfer coefficient depends mainly on the steam mass fin By using dynamic pressure measurements and visual observations, six regimes of direct contact condensation have been identified on a condensation regime map, which are chugging, transition region from chugging to condensation oscillation, condensation oscillation, bubbling condensation oscillation, stable condensation, and interfacial oscillation condensation. The regime boundaries are quite clearly distinguishable except the boundaries of bubbling condensation oscillation and interfacial oscillation condensation.

• Journal of Distribution Science
• /
• v.20 no.8
• /
• pp.1-8
• /
• 2022

Purpose: Research on attracting foreign direct investment (FDI) plays an important role in helping provinces attract more FDI projects. However, with local competition, FDI enterprises also have to consider their investment. This study evaluates the provincial competitiveness to attract FDI in Thai Nguyen province, a province of Vietnam. In which provincial distribution of competitiveness is measured through nine indicators. Research design, data, and methodology: The study collects data (FDI and the provincial competitiveness index) from 2006 to 2020. The study uses Autoregressive Distributed Lag (ARDL) to text the impact of distribution of competitivenes on foreign direct investment. With time-series, the ARDL is suitable for data analysis. Results: The regression results indicate that the competition index of market entry and informal costs negatively impact attracting FDI into the province; The human resource training quality index has a positive effect on FDI. The results show that FDI enterprises pay much attention to business establishment procedures, hidden costs, and quality of human resources in the province. Conclusions: At the same time, in terms of practice, the results of this study, the authors also offer solutions to help improve the ability to attract FDI into Thai Nguyen province. The significant provincial competitiveness indicators should be taken into account for improvement first.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.135-144
• /
• 2011

Direct parameter estimation method is verified with various models based on Neyman-Scott rectangular pulse model (NSRPM). Also, newly modified NSRPM (NMSRPM) that uses normal distribution is developed. Precipitation data observed by Korea Meteorological Administration (KMA) for 47 years is applied for parameter estimation. For model performance verification, we used statistics, wet ratio and precipitation accumulate distribution of precipitation generated. The comparison of statistics indicates that absolute relative error (ARE)s of the results from NSRPM and modified NSRPM (MNSRPM) are increasing on July, August, and September and ARE of NMNSRPM shows 10.11% that is the smallest ARE among the three models. NMNSRPM simulates the characteristics of precipitation statistics well. By comparing the wet ratio, MNSRPM shows the smallest ARE that is 16.35% and by using the graphical analysis, we found that these three models underestimate the wet ratio. The three models show about 2% of ARE of precipitation accumulate probability. Those results show that the three models simulate precipitation accumulate probability well. As the results, it is found that the parameters of NSRPM, MNSRPM and NMNSRPM are able to be estimated by the direct parameter estimation method. From the results listed above, we concluded that the direct parameter estimation is able to be applied to various models based on NSRPM. NMNSRPM shows good performance compared with developed model-NSRPM and MNSRPM and the models based on NSRPM can be developed by the direct parameter estimation method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2391-2396
• /
• 2010

The power-controlled six-port element that can control the local oscillator signal power and receiving RF signal power was designed and implemented in this paper. The direct conversion six-port element configuration was proposed, which provides the constant six-port output power by controlling the six-port input power with various signal strength. The direct conversion six-port element protects the power detector element of six-port receiver from the saturation status and compensates the transmission performance degradation. For implementation of power-controlled six-port element, the power-controlled six-port element including the power controller was analyzed. The implemented power-controlled six-port element shows the power control capability of 36 dB and gain imbalance of about 1.6 dB, phase imbalance of about $4^{\circ}$ in the frequency range of 1.69 GHz. The measured results show the good performance as direct conversion front-end element.

• Steel and Composite Structures
• /
• v.13 no.1
• /
• pp.15-33
• /
• 2012

For an axially loaded box-shaped member, the width-to-thickness ratio of the plate elements preferably should not be greater than 40 for Q235 steel grades in accordance with the Chinese code GB50017-2003. However, in practical engineering the plate width-to-thickness ratio is up to 120, much more than the limiting value. In this paper, a 3D nonlinear finite element model is developed that accounts for both geometrical imperfections and residual stresses and the ultimate capacity of welded built-up box columns, with larger width-to-thickness ratios of 60, 70, 80, and 100, is simulated. At the same time, the interaction buckling strength of these members is determined using the effective width method recommended in the Chinese code GB50018-2002, Eurocode 3 EN1993-1 and American standard ANSI/AISC 360-10 and the direct strength method developed in recent years. The studies show that the finite element model proposed can simulate the behavior of nonlinear buckling of axially loaded box-shaped members very well. The width-to-thickness ratio of the plate elements in welded box section columns can be enlarged up to 100 for Q235 steel grades. Good agreements are observed between the results obtained from the FEM and direct strength method. The modified direct strength method provides a better estimation of the column strength compared to the direct strength method over the full range of plate width-to-thickness ratio. The Chinese code and Eurocode 3 are overly conservative prediction of column capacity while the American standard provides a better prediction and is slightly conservative for b/t = 60. Therefore, it is suggested that the modified direct strength method should be adopted when revising the Chinese code.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.27-37
• /
• 2024

In this study, direct algorithm-based back analysis was utilized to perform back analysis on two actual earth retaining wall fields, which was then compared with genetic algorithm-based method to evaluate the suitability of the back analysis. Additionally, in order to propose effective utilization methods of the program, the measurement data, as the input for the back analysis, was varied for each excavation step, and the applicability of the back analysis results(displacement, axial force) was examined. The research findings indicate that both direct algorithm and genetic algorithm show high applicability; however, the optimization for this program is better predicted by the direct algorithm. Moreover, in order to effectively use the back analysis program employing the direct algorithm, it was evaluated that relatively accurate prediction of the earth retaining wall behavior could be achieved by inputting measurement data from the 7th excavation step for fields with final excavation steps ranging from 8 to 11.

• Korean Journal of Mathematics
• /
• v.17 no.3
• /
• pp.245-248
• /
• 2009

We consider pm-ring with the property such that every prime ideal is contained in only one maximal ideal. Orsatti[4] characterized pm-rings by means of the retraction. Contessa[1] found algebraic condition, by using that direct product of pm-rings is a pm-ring. We show that C(X, H) and C(X, C) are pm-rings and we extend a quasi pm-domain.

• Honam Mathematical Journal
• /
• v.29 no.2
• /
• pp.289-297
• /
• 2007

In this paper, we show that BCI-algebras P and Q are injective if and only if its direct sum P $\oplus$ Q is injective. Moreover, we obtain the equivalent conditions for a p-semisimple BCI-algebra to be p-injective.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.343-348
• /
• 2002

We are going to build a direct railway line between Europe and Asia by connecting North-South line. It can reduce a transportation distance by above 10,000km. But problems of TSR which is most important line have been exposed such as backward facilities and operations. In this paper we find out problems of TSR in detail and show those improvements.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.40-42
• /
• 2010

최근 3DTV 등의 3D 디스플레이의 공급으로 기존의 입체 콘텐츠뿐만 아니라, 일반 2D 영상도 자동적으로 입체 콘텐츠로 변환하여 3D로 시청할 수 있다. 이러한 콘텐츠를 시청할 때에 주로 사용하는 3D 디스플레이에는 자체적인 UI를 내장하고 있는데, 입체 모드에서의 이러한 UI를 3D로 변환하여 사용할 수 있는 3D UI기술에 대한 관심이 높아지고 있다. 본 논문에서는, 3D UI의 관심도 증가에 따라 좀 더 편리하고 이해도가 높은 3D UI의 개발 방법에 대하여 제안한다. Directshow를 이용하여, 문자와 UI 배경을 합성한다. 여기에 UI의 투명도, 시차, 밝기 등을 조절 가능하게 하여 사용자의 편의에 따라 선택할 수 있게 한다. 사전에 입체로 제작된 실험 영상을 실행하여 그 위에 메뉴 화면, 메뉴 글씨 등을 띄워 입체감 있는 3D UI를 제작, 증강을 체험할 수 있는 3D UI 플레이어를 구현한다.