• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.354-357
• /
• 2004

The addition of oxygenates to diesel fuel can significantly reduce particulate emissions. Dibutyl maleate (DBM) and tripropylene glycol methyl ether (TGME) have been identified as possible additives based on their physicochemical characteristics and performance in engine test. However, their potential environmental impacts are unknown. therefore, practical considerations in the selection of an oxygenate additives should include cost, availability, compatibility with engines and fuel, and, particularly, its overall environmental impact. This study was investigated to determine optimal condition for the analysis of potential diesel oxygenates using SPME technique with GC-FID. Four fibers were compared and CAR/PDMS fiber was found to be the most sensitive when used direct-sampling. An absorption time of 30min and a desorption time of 5min provided to be the most sensitivity. The effects of experimental parameters such as the addition of salts, agitation, absorption time, compositon on the analysis were investigated. Analytical parameter such as linearity was also evaluated.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.8-14
• /
• 2016

The optimal estimation of a bearing only target tracking problem be achieved through the solution of the Fokker-Planck equation and the Bayesian update. Recently, a nonlinear filtering algorithm using a direct quadrature method of moments in which the associated Fokker-Planck equation can be propagated efficiently and accurately was proposed. Although this approach has demonstrated its promising in the field of nonlinear filtering in several examples, the "degeneracy" phenomenon, similar to that which exists in a typical particle filter, occasionally appears because only the weights are updated in the modified Bayesian rule in this algorithm. Therefore, in this paper to enhance the performance, a more stable measurement update process based upon the update equation in the Extended Kalman filters and a more accurate initialization and re-sampling strategy for weight and abscissas are proposed. Simulations are used to show the effectiveness of the proposed filter and the obtained results are promising.

• Korean Journal of Hydrosciences
• /
• 제10권
• /
• pp.47-58
• /
• 1999

Protection of groundwater resources from contamination has been of increasing concern throughout the past decades. In practice, however, groundwater monitoring is performed based on the experience and intuition of experts or on the convenience. In dealing with groundwater contamination, we need to know what contaminants have the potential to threat the water quality and the distribution and concentration of the plumes. Monitoring of the subsurface environment through remote geophysical techniques or direct sampling from wells can provide such information. Once known, the plume can be properly menaged. Evaluation of existing methodologies for groundwater monitoring network design revealed that one should select an appropriate design method based on the purpose of the network and the avaliability of field information. Integer programming approach, one of the general purpose network design tools, and a cost-to-go function evaluation approach for special purpose network design were tested for field applicability. For the same contaminated aquifer, two approaches resulted in different well locations. The amount of information, however, was about the same.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권4호
• /
• pp.251-258
• /
• 2005

Automatic document classification may differ significantly according to the characteristics of documents that are subject to classification, as well as classifier's performance. This research identifies e-mail document's characteristics to apply a three-step preprocessing algorithm that can minimize e-mail document's atypical characteristics. In the first 5go, uncertain based sampling algorithm that used Mean Absolute Deviation(MAD), is used to address the question of selection learning document for the rule generation at the time of classification. In the subsequent stage, Weighted vlaue assigning method by attribute is applied to increase the discriminating capability of the terms that appear on the title on the e-mail document characteristic level. in the third and last stage, accuracy level during classification by each category is increased by using Naive Bayesian Presumptive Algorithm's Dynamic Threshold. And, we implemented an E-Mail Recommendtion System using a three-step preprocessing algorithm the enable users for direct and optimal classification with the recommendation of the applicable category when a mail arrives.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1208-1210
• /
• 2003

Most of all, DTC drive is very simple in its implementation because it needs only two hysteresis comparator and switching vector table for both flux and torque control. The amplitude of hysteresis band greatly influences on the drive performance such as flux and torque ripple and inverter switching frequency. In this paper the influence of the amplitudes of flux and torque hysteresis bands and sampling time of control program on the torque and flux ripples are investigated. Simulation results confirm the superiority of the DTC under the proposed method over the conventional DTC.

• Communications for Statistical Applications and Methods
• /
• 제26권2호
• /
• pp.175-189
• /
• 2019

The problem of the estimation of quantitative sensitive variable using the item sum technique (IST) on successive occasions has been discussed. IST difference, IST regression, and IST general class of estimators have been proposed to estimate quantitative sensitive variable at the current occasion in two occasion successive sampling. The proposed new estimators have been elaborated under Trappmann et al. (Journal of Survey Statistics and Methodology, 2, 58-77, 2014) as well as Perri et al. (Biometrical Journal, 60, 155-173, 2018) allocation designs to allocate long list and short list samples of IST. The properties of all proposed estimators have been derived including optimum replacement policy. The proposed estimators have been mutually compared under the above mentioned allocation designs. The comparison has also been conducted with a direct method. Numerical applications through empirical as well as simplistic simulation has been used to show how the illustrated IST on successive occasions may venture in practical situations.

• 대한한방내과학회지
• /
• 제41권1호
• /
• pp.14-28
• /
• 2020

Objectives: The aim of this study was to analyze consumer experience with Digestive Enzymes, a digestive enzyme product that includes medicinal herbs (Multi-Zyme^®). The goal was to provide basic data on improvements and marketability of future digestive enzyme products containing medicinal herbs. Methods: Qualitative research was conducted to explore the current participants' experience. In-depth interviews with a semi-structured interview guide were conducted to investigate the experience and perception of the participants. The participants were recruited using snowball sampling and purposive sampling, and a qualitative content analysis method was adopted. Credibility was ensured by adopting a member check, triangulation, and peer debriefing method. Results: In-depth interviews were completed with a total of 8 participants. The collected data were classified into 16 codes and then further divided into the following seven categories: direct buying, indirect buying, effects, questions, recommendations, positive perception, and negative perception. The categories were grouped into three themes: 'Experience of purchasing existing health foods', 'Experience of taking Multi-Zyme', and 'Opinions on selling Multi-Zyme at Korean medicine clinics'. Conclusion: The participants experienced effect of the Multi-Zyme^® and were willing to recommend it around. However, the Korean medicine doctors need to inform consumers about the dose and duration when taking Multi-Zyme^® to prevent abuse. Some consumers may trust Multi-Zyme^® sales from Korean medicine clinics, but some held opinions that those sales were not trustworthy, so promotion and improvement are needed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.816-821
• /
• 2003

The pumping characteristics of a disk-type drag pump (DTDP) from free molecular flow region to the slip flow region are calculated by the direct simulation Monte Carlo (DSMC) method. In this study, the pumping performance is studied numerically for several channel depths. The interaction between molecules is modeled by variable hard-sphere (VHS). The no time counter method is used as a collision sampling technique. The clearance between rotor and stator is considered an effect on performance. Spiral channels are cut on both upper and lower sides of rotating disks, and stationary disks are planar. A three-dimensional DSMC method for the analysis of steady rarefied flows in a single-stage DTDP has been developed. Velocity and density fields were obtained by the DSMC simulation in the rotor. The present experimental data in the outlet pressure range of $7.5{\times}10^{-3}{\sim}4$ Torr were compared with the DSMC results in the single-stage DTDP. Comparison between the experimental data and DSMC results showed good agreement.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.644-654
• /
• 2024

After the Tohoku earthquake and tsunami (Japan, 2011), regulatory efforts to mitigate external hazards have increased both the safety requirements and the total capital cost of nuclear power plants (NPPs). In these circumstances, identifying not only disaster robustness but also cost-effective capacity setting of NPPs has become one of the most important tasks for the nuclear power industry. A few studies have been performed to relocate the seismic capacity of NPPs, yet the effects of multiple hazards have not been accounted for in NPP capacity optimization. The major challenges in extending this problem to the multihazard dimension are (1) the high computational costs for both multihazard risk quantification and system-level optimization and (2) the lack of capital cost databases of NPPs. To resolve these issues, this paper proposes an effective method that identifies the optimal multihazard capacity of NPPs using a multi-objective genetic algorithm and the two-stage direct quantification of fault trees using Monte Carlo simulation method, called the two-stage DQFM. Also, a capacity-based indirect capital cost measure is proposed. Such a proposed method enables NPP to achieve safety and cost-effectiveness against multi-hazard simultaneously within the computationally efficient platform. The proposed multihazard capacity optimization framework is demonstrated and tested with an earthquake-tsunami example.