• 제목/요약/키워드: Direct Production

검색결과 1,551건 처리시간 0.031초

인삼 직파재배에서 파종밀도가 생육 및 수량에 미치는 영향 (Effect of Seeding Rate on Growth and Yield of Ginseng Plant in Direct-Sowing Culture)

  • 이종철;안대진
    • Journal of Ginseng Research
    • /
    • 제22권4호
    • /
    • pp.299-303
    • /
    • 1998
  • To know possibility of raw ginseng production for white- and red-ginseng by direct-sowing culture, seeds were directly sowed or seedlings were transplanted at soil condition of sandy loam in ginseng field. After cultivation, the characters of 5-year-old ginseng were investigated. Number of survived plants was increased with increase the seeding quantity in direct-sowing culture, the survived plants in direct-sowing culture was higher than that of transplanting one. Rate of the numbers of survived plants to numbers of seeds sowed in plots of 134 or 90 seeds sowed per tan, 180 x 90cm area, inspire of high number of survived plant was high compared to that of transplanting culture. Occurrence rate of rusty root of ginseng in direct-sowing culture was low significantly compared to that of transplanting culture. Root yield showed in the order of 134, 268, 90 seeds sowed, the values of yield in direct-sowing culture were high obviously compared to that of transplanting one. Individual root weight was increased with decrease the seeding quantity, however, the root weight in plot of 90 seeds sowed showed almost equal the weight in transplanting culture. The number of usable raw ginseng for white- and red-ginseng was increased with decrease of the seeding quantity; the numbers were higher than that of transplanting culture remarkably. We concluded that optimum seedling rate in direct-sowing culture of ginseng was 90 to 134 seeds per tan considering the yield per area and production rate of large root.

  • PDF

INFLUENCE OF DIRECT-FED MICROBIALS ON RUMINAL MICROBIAL FERMENTATION AND PERFORMANCE OF RUMINANTS: A REVIEW

  • Yoon, I.K.;Stern, M.D.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제8권6호
    • /
    • pp.533-555
    • /
    • 1995
  • Direct-fed microbials (DFM) have been used to enhance milk production in lactating cattle and to increase feed efficiency and body weight gain in growing ruminants. Primary microorganisms that have been used as DFM for ruminants are fungal cultures including Aspergillus oryzae and Saccharomyces cerevisiae and lactic acid bacteria such as Lactobacillus or Streptococcus. Attempts have been made to determine the basic mechanisms describing beneficial effects of DFM supplements. Various modes of action for DFM have been suggested including : stimulation of ruminal microbial growth, stabilization of ruminal pH, changes in ruminal microbial fermentation pattern, increases in digestibility of nutrients ingested, greater nutrient flow to the small intestine, greater nutrient retention and alleviation of stress, however, these responses have not been observed consistently. Variations in microbial supplements, dosage level, production level and age of the animal, diet and environmental condition or various combinations of the above may partially explain the inconsistencies in response. This review summarizes production responses that have been observed under various conditions with supplemental DFM and also corresponding modification of ruminal fermentation and other changes in the gastrointestinal tract of ruminant animals.

Consideration of reversed Boudouard reaction in solid oxide direct carbon fuel cell (SO-DCFC)

  • Vahc, Zuh Youn;Yi, Sung Chul
    • Journal of Ceramic Processing Research
    • /
    • 제19권6호
    • /
    • pp.514-518
    • /
    • 2018
  • The direct carbon fuel cell (DCFC) has attracted researcher's attention recently, due to its high conversion efficiency and its abundant fuel, carbon. A DCFC mathematical model has developed in two-dimensional, lab-scale, and considers Boudouard reaction and carbon monoxide (CO) oxidation. The model simulates the CO production by Boudouard reaction and additional electron production by CO oxidation. The Boudouard equilibrium strongly depends on operating temperature and affects the amount of produced CO and consequentially affects the overall fuel cell performance. Two different operating temperatures (973 K, 1023 K) has been calculated to discover the CO production by Boudouard reaction and overall fuel cell performance. Moreover, anode thickness of the cell has been considered to find out the influence of the Boudouard reaction zone in fuel cell performance. It was found that in high temperature operating DCFC modeling, the Boudouard reaction cannot be neglected and has a vital role in the overall fuel cell performance.

농산물 직거래 유통채널별 저해요인 분석과 활성화 방안 (Analysis of Factor Hindering and Promotion Strategy on the Direct Marketing of Agricultural Products)

  • 김덕현;박길석;이수영;이승현
    • 유통과학연구
    • /
    • 제14권12호
    • /
    • pp.71-78
    • /
    • 2016
  • Purpose - This paper is for the Analysis on the Hindrance Factors and Activation Scheme by the Type of Distribution Channel in Direct transaction of Agricultural Products. As the distribution structure of agricultural products has become changable, farmers seem to use the type of direct distribution in order to enhance the receiving price. This study aims to explore the hindrance factors and income variation rate in direct transaction of agricultural produces, specifically focusing on the 167 farmers. Research design, data, and methodology - To ascertain the hindrance factors exactly by the type of distribution channel, the managements were classified by four subcategories, that is high sales percentage with shopping malls, SNS, shopping malls and SNS, and off-line direct transaction. Results - As a result of the hypothesis test, hinderance factors in online direct deal activation were found to be in the order of the difficulty in continuous content production, the difficulty in shopping mall operation and maintenance, and the difficulty in card commission problems, and in the order of the difficulties in continuous content production, the difficulty in continuous content production, the difficulty in shopping mall operation and maintenance, and the difficulty in branding for the SNS group. Thus, it can be seen that the difficulty in continuous content production, shopping mall operation and maintenance were found to be the biggest obstacles. In addition, hindering factors in online direct deal activation were found to be in the order of the difficulty in credit card settlement, the difficulty in publicity, and the difficulty in dealing with unsold goods. The group with high sales rate in shopping mall was found to be increased by 23.9% in the gross income compared to the previous year, the group with high SNS sales ratio increased by 56.5%, the group with direct offline transaction increased by 37.1%, among which the group with the highest increase rate of SNS sales ratio was found to be the highest from the rate of increase/decrease of the income, which was statistically significant. Conclusions - It can be suggested that government and local government may provide agricultural management with supporting plan which in turn can activate direct transaction in any possible ways.

복합전도성 세라믹 분리막의 탄화수소 직접분해에 의한 고순도 수소와 탄소 제조 (Development of Mixed Conducting Ceramic Membrane for High Purity Hydrogen and Carbon Production from Methane Direct Cracking)

  • 김지호;최덕균;김진호;조우석;황광택
    • 한국수소및신에너지학회논문집
    • /
    • 제22권5호
    • /
    • pp.649-655
    • /
    • 2011
  • Methane direct cracking can be utilized to produce $CO_x$ and $NO_x$-free hydrogen for PEM fuel cells, oil refineries, ammonia and methanol production. We present the results of a systematic study of methane direct cracking using a mixed conducting oxide, Y-doped $BaZrO_3$ ($BaZr_{0.85}Y_{0.15}O_3$), membrane. In this paper, dense $BaZr_{0.85}Y_{0.15}O_3$ membrane with disk shape was successfully sintered at $1400^{\circ}C$ with a relative density of more 93% via addition of 1 wt% ZnO. The ($BaZr_{0.85}Y_{0.15}O_3$) membrane is covered with Pd as catalyst for methane decomposition with an DC magnetron sputtering method. Reaction temperature was $800^{\circ}C$ and high purity methane as reactant was employed to membrane side with 1.5 bar pressure. The $H_2$ produced by the reaction was transported through mixed conducting oxide membrane to the outer side. In addition, it was observed that the carbon, by-product, after methane direct cracking was deposited on the Pd/ZnO-$BaZr_{0.85}Y_{0.15}O_3$ membrane. The produced carbon has a shape of sphere and nanosheet, and a particle size of 80 to 100 nm.

양식업 배합사료 직접지불제의 적정 지원수준 결정에 관한 연구 : 직접지불제의 생산 및 소득효과 분석을 중심으로 (A Study on the Determination of Optimum Level of Payments in the Direct Payment Program for Aquaculture Extruded Pellets)

  • 김도훈;오태기
    • 수산경영론집
    • /
    • 제38권1호
    • /
    • pp.1-17
    • /
    • 2007
  • This study is aimed at investigating optimum level of payments in the direct payment program for aquaculture extruded pellets both theoretically and practically by analyzing the effects on production and income in accordance with Green Box conditions of WTO Agreement on Agriculture. In particular, by analyzing both effects on production and income, it evaluates and compares payments affecting to the level of production and income, respectively. Analysis results indicate that the optimum level of payments in the direct payment program for aquaculture extruded pellets is determined by the growth rate of farmed fish, farming period, price and volume of extruded pellets, and additional amount of cost increase and decrease. Suppose that growth rates of farmed fish by extruded pellets(EP) and raw fish - based moist pellets(MP) are the same, it reveals the optimum level of payment should be lowered from the current level of payment. However, when the growth rate of farmed fish by EP is lower than that by MP, the optimum level of payment should be raised from the current level and total amount of payments by area should be increased as well.

  • PDF

The Development of Intelligent Direct Load Control System

  • Choi, Sang Yule
    • International journal of advanced smart convergence
    • /
    • 제4권2호
    • /
    • pp.103-108
    • /
    • 2015
  • The electric utility has the responsibility of reducing the impact of peaks on electricity demand and related costs. Therefore, they have introduced Direct Load Control System (DLCS) to automate the external control of shedding customer load that it controls. Since the number of customer load participating in the DLC program are keep increasing, DLCS operators a re facing difficulty in monitoring and controlling customer load. The existing DLCS needs constant operator intervention, e.g., whenever the load is about to exceed a predefined amount, it needs operator's intervention to control the on/off status of the load. Therefore, DLCS operators need the state-of-the-art DLCS, which can control automatically the on/off status of the customer load without intervention as much as possible. This paper presents an intelligent DLCS using the active database. The proposed DLCS is applying the active database to DLCS which can avoid operator's intervention as much as possible. To demonstrate the validity of the proposed system, variable production rules and intelligent demand controller are presented.

Direct Metal Laser Sintering-New Possibilities in Biomedical Part Manufacturing

  • Kotila, Juha;Syvanen, Tatu;Hanninen, Jouni;Latikka, Maria;Nyrhila, Olli
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.248-249
    • /
    • 2006
  • Direct Metal Laser Sintering (DMLS) has been utilized for prototype manufacturing of functional metal components for years now. During this period the surface quality, mechanical properties, detail resolution and easiness of the process have been improved to the level suitable for direct production of complex metallic components for various applications. The paper will present the latest DMLS technology utilizing EOSINT M270 laser sintering machine and EOSTYLE support generation software for direct and rapid production of complex shaped metallic components for various purposes. The focus of the presentation will be in rapid manufacturing of customized biomedical implants and surgical devices of the latest stainless steel, titanium and cobalt-chromium-molybdenum alloys. In addition to biomedical applications, other application areas where complex metallic parts with stringent requirements are being needed will be presented.

  • PDF

Development of Direct-Wet-Rice-Seedling Machines in Korea

  • Rhee, Joong-Young;Lee, Chong-Ho-
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.256-266
    • /
    • 1993
  • History , achievement and future of direct-wet-rice-seeding technique in Korea and problems encountered in on-farming research were introduced. Some farmers are very eager to lower production cost and save labor. Their effort results in several direct-wet-seeding methods and seeding machines. The design problems and improvement points related to the direct -wet-rice-seeding machines were drawn out of field test.

  • PDF

Genetic parameters and principal components analysis of breeding value for birth and weaning weight in Egyptian buffalo

  • Salem, Mohamed Mahmoud Ibrahim;Amin, Amin Mohamed Said;Ashour, Ayman Fouad;Ibrahim, Mohamed Mohamed El-said;Abo-Ismail, Mohammed Kotb
    • Animal Bioscience
    • /
    • 제34권1호
    • /
    • pp.12-19
    • /
    • 2021
  • Objective: The objectives of the current study were to study the main environmental factors affecting birth weight (BW) and weaning weight (WW), estimate variance components, genetic parameters and genetic trend and to evaluate the variability and relationships among breeding value of BW and WW using principal components analysis (PCA). Methods: A total of 16,370 records were collected from 8,271 buffalo calves. Genetic parameters and breeding values were estimated using a bivariate animal model which includes direct, maternal and permanent maternal effects. These estimates were standardized and used in PCA. Results: The direct heritability estimates were 0.06 and 0.41 for BW and WW, respectively whereas direct maternal heritability values were 0.03 and 0.14, respectively. Proportions of variance due to permanent environmental effects of dam were 0.455 and 0.280 for BW and WW respectively. The genetic correlation between BW and WWs was weak approaching zero, but the maternal correlation was 0.26. The first two principal components (PC1 and PC2) were estimated utilizing the standardized breeding values according to Kaiser method. The total variance explained by the first two PCs was 71.17% in which 45.91% and 25.25% were explained by PC1 and PC2, respectively. The direct breeding values of BW were related to PC2 but those of WW and maternal breeding values of BW and WWs were associated with PC1. Conclusion: The results of genetic parameters and PCA indicate that BW and WWs were not genetically correlated and improving growth traits of Egyptian buffaloes could be achieved using WW without any adverse effect by BW.